view kconfig/lex.zconf.c_shipped @ 953:13916d161ec0

xzcat: remove XZ_(PREALLOC|SINGLE), inline xz_dec_bcj_create Because we only use XZ_DYNALLOC, there's a bunch of dead code. This patch removes the #ifdef's and if()s associated with support for multiple modes. single_call was only used to store the mode; it is no longer needed. A little bit of reorganization was needed to reduce the number of prototypes. Documentation associated with dead code was dropped. There are still some relics of multiple modes in the continued presence of "XZ_DYNALLOC" and xz_mode. Additionally, I inlined xz_dec_bcj_create; it was called once. This loses about 125 lines, mostly comments.
author Isaac Dunham <idunham@lavabit.com>
date Wed, 17 Jul 2013 17:25:07 -0500
parents 4d21d59f3206
children
line wrap: on
line source


#line 3 "scripts/kconfig/lex.zconf.c"

#define  YY_INT_ALIGNED short int

/* A lexical scanner generated by flex */

#define FLEX_SCANNER
#define YY_FLEX_MAJOR_VERSION 2
#define YY_FLEX_MINOR_VERSION 5
#define YY_FLEX_SUBMINOR_VERSION 33
#if YY_FLEX_SUBMINOR_VERSION > 0
#define FLEX_BETA
#endif

/* First, we deal with  platform-specific or compiler-specific issues. */

/* begin standard C headers. */
#include <stdio.h>
#include <string.h>
#include <errno.h>
#include <stdlib.h>

/* end standard C headers. */

/* flex integer type definitions */

#ifndef FLEXINT_H
#define FLEXINT_H

/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */

#if __STDC_VERSION__ >= 199901L

/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
 * if you want the limit (max/min) macros for int types.
 */
#ifndef __STDC_LIMIT_MACROS
#define __STDC_LIMIT_MACROS 1
#endif

#include <inttypes.h>
typedef int8_t flex_int8_t;
typedef uint8_t flex_uint8_t;
typedef int16_t flex_int16_t;
typedef uint16_t flex_uint16_t;
typedef int32_t flex_int32_t;
typedef uint32_t flex_uint32_t;
#else
typedef signed char flex_int8_t;
typedef short int flex_int16_t;
typedef int flex_int32_t;
typedef unsigned char flex_uint8_t; 
typedef unsigned short int flex_uint16_t;
typedef unsigned int flex_uint32_t;
#endif /* ! C99 */

/* Limits of integral types. */
#ifndef INT8_MIN
#define INT8_MIN               (-128)
#endif
#ifndef INT16_MIN
#define INT16_MIN              (-32767-1)
#endif
#ifndef INT32_MIN
#define INT32_MIN              (-2147483647-1)
#endif
#ifndef INT8_MAX
#define INT8_MAX               (127)
#endif
#ifndef INT16_MAX
#define INT16_MAX              (32767)
#endif
#ifndef INT32_MAX
#define INT32_MAX              (2147483647)
#endif
#ifndef UINT8_MAX
#define UINT8_MAX              (255U)
#endif
#ifndef UINT16_MAX
#define UINT16_MAX             (65535U)
#endif
#ifndef UINT32_MAX
#define UINT32_MAX             (4294967295U)
#endif

#endif /* ! FLEXINT_H */

#ifdef __cplusplus

/* The "const" storage-class-modifier is valid. */
#define YY_USE_CONST

#else	/* ! __cplusplus */

#if __STDC__

#define YY_USE_CONST

#endif	/* __STDC__ */
#endif	/* ! __cplusplus */

#ifdef YY_USE_CONST
#define yyconst const
#else
#define yyconst
#endif

/* Returned upon end-of-file. */
#define YY_NULL 0

/* Promotes a possibly negative, possibly signed char to an unsigned
 * integer for use as an array index.  If the signed char is negative,
 * we want to instead treat it as an 8-bit unsigned char, hence the
 * double cast.
 */
#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)

/* Enter a start condition.  This macro really ought to take a parameter,
 * but we do it the disgusting crufty way forced on us by the ()-less
 * definition of BEGIN.
 */
#define BEGIN (yy_start) = 1 + 2 *

/* Translate the current start state into a value that can be later handed
 * to BEGIN to return to the state.  The YYSTATE alias is for lex
 * compatibility.
 */
#define YY_START (((yy_start) - 1) / 2)
#define YYSTATE YY_START

/* Action number for EOF rule of a given start state. */
#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)

/* Special action meaning "start processing a new file". */
#define YY_NEW_FILE zconfrestart(zconfin  )

#define YY_END_OF_BUFFER_CHAR 0

/* Size of default input buffer. */
#ifndef YY_BUF_SIZE
#define YY_BUF_SIZE 16384
#endif

/* The state buf must be large enough to hold one state per character in the main buffer.
 */
#define YY_STATE_BUF_SIZE   ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))

#ifndef YY_TYPEDEF_YY_BUFFER_STATE
#define YY_TYPEDEF_YY_BUFFER_STATE
typedef struct yy_buffer_state *YY_BUFFER_STATE;
#endif

extern int zconfleng;

extern FILE *zconfin, *zconfout;

#define EOB_ACT_CONTINUE_SCAN 0
#define EOB_ACT_END_OF_FILE 1
#define EOB_ACT_LAST_MATCH 2

    #define YY_LESS_LINENO(n)
    
/* Return all but the first "n" matched characters back to the input stream. */
#define yyless(n) \
	do \
		{ \
		/* Undo effects of setting up zconftext. */ \
        int yyless_macro_arg = (n); \
        YY_LESS_LINENO(yyless_macro_arg);\
		*yy_cp = (yy_hold_char); \
		YY_RESTORE_YY_MORE_OFFSET \
		(yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
		YY_DO_BEFORE_ACTION; /* set up zconftext again */ \
		} \
	while ( 0 )

#define unput(c) yyunput( c, (yytext_ptr)  )

/* The following is because we cannot portably get our hands on size_t
 * (without autoconf's help, which isn't available because we want
 * flex-generated scanners to compile on their own).
 */

#ifndef YY_TYPEDEF_YY_SIZE_T
#define YY_TYPEDEF_YY_SIZE_T
typedef unsigned int yy_size_t;
#endif

#ifndef YY_STRUCT_YY_BUFFER_STATE
#define YY_STRUCT_YY_BUFFER_STATE
struct yy_buffer_state
	{
	FILE *yy_input_file;

	char *yy_ch_buf;		/* input buffer */
	char *yy_buf_pos;		/* current position in input buffer */

	/* Size of input buffer in bytes, not including room for EOB
	 * characters.
	 */
	yy_size_t yy_buf_size;

	/* Number of characters read into yy_ch_buf, not including EOB
	 * characters.
	 */
	int yy_n_chars;

	/* Whether we "own" the buffer - i.e., we know we created it,
	 * and can realloc() it to grow it, and should free() it to
	 * delete it.
	 */
	int yy_is_our_buffer;

	/* Whether this is an "interactive" input source; if so, and
	 * if we're using stdio for input, then we want to use getc()
	 * instead of fread(), to make sure we stop fetching input after
	 * each newline.
	 */
	int yy_is_interactive;

	/* Whether we're considered to be at the beginning of a line.
	 * If so, '^' rules will be active on the next match, otherwise
	 * not.
	 */
	int yy_at_bol;

    int yy_bs_lineno; /**< The line count. */
    int yy_bs_column; /**< The column count. */
    
	/* Whether to try to fill the input buffer when we reach the
	 * end of it.
	 */
	int yy_fill_buffer;

	int yy_buffer_status;

#define YY_BUFFER_NEW 0
#define YY_BUFFER_NORMAL 1
	/* When an EOF's been seen but there's still some text to process
	 * then we mark the buffer as YY_EOF_PENDING, to indicate that we
	 * shouldn't try reading from the input source any more.  We might
	 * still have a bunch of tokens to match, though, because of
	 * possible backing-up.
	 *
	 * When we actually see the EOF, we change the status to "new"
	 * (via zconfrestart()), so that the user can continue scanning by
	 * just pointing zconfin at a new input file.
	 */
#define YY_BUFFER_EOF_PENDING 2

	};
#endif /* !YY_STRUCT_YY_BUFFER_STATE */

/* Stack of input buffers. */
static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */

/* We provide macros for accessing buffer states in case in the
 * future we want to put the buffer states in a more general
 * "scanner state".
 *
 * Returns the top of the stack, or NULL.
 */
#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
                          ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
                          : NULL)

/* Same as previous macro, but useful when we know that the buffer stack is not
 * NULL or when we need an lvalue. For internal use only.
 */
#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]

/* yy_hold_char holds the character lost when zconftext is formed. */
static char yy_hold_char;
static int yy_n_chars;		/* number of characters read into yy_ch_buf */
int zconfleng;

/* Points to current character in buffer. */
static char *yy_c_buf_p = (char *) 0;
static int yy_init = 0;		/* whether we need to initialize */
static int yy_start = 0;	/* start state number */

/* Flag which is used to allow zconfwrap()'s to do buffer switches
 * instead of setting up a fresh zconfin.  A bit of a hack ...
 */
static int yy_did_buffer_switch_on_eof;

void zconfrestart (FILE *input_file  );
void zconf_switch_to_buffer (YY_BUFFER_STATE new_buffer  );
YY_BUFFER_STATE zconf_create_buffer (FILE *file,int size  );
void zconf_delete_buffer (YY_BUFFER_STATE b  );
void zconf_flush_buffer (YY_BUFFER_STATE b  );
void zconfpush_buffer_state (YY_BUFFER_STATE new_buffer  );
void zconfpop_buffer_state (void );

static void zconfensure_buffer_stack (void );
static void zconf_load_buffer_state (void );
static void zconf_init_buffer (YY_BUFFER_STATE b,FILE *file  );

#define YY_FLUSH_BUFFER zconf_flush_buffer(YY_CURRENT_BUFFER )

YY_BUFFER_STATE zconf_scan_buffer (char *base,yy_size_t size  );
YY_BUFFER_STATE zconf_scan_string (yyconst char *yy_str  );
YY_BUFFER_STATE zconf_scan_bytes (yyconst char *bytes,int len  );

void *zconfalloc (yy_size_t  );
void *zconfrealloc (void *,yy_size_t  );
void zconffree (void *  );

#define yy_new_buffer zconf_create_buffer

#define yy_set_interactive(is_interactive) \
	{ \
	if ( ! YY_CURRENT_BUFFER ){ \
        zconfensure_buffer_stack (); \
		YY_CURRENT_BUFFER_LVALUE =    \
            zconf_create_buffer(zconfin,YY_BUF_SIZE ); \
	} \
	YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
	}

#define yy_set_bol(at_bol) \
	{ \
	if ( ! YY_CURRENT_BUFFER ){\
        zconfensure_buffer_stack (); \
		YY_CURRENT_BUFFER_LVALUE =    \
            zconf_create_buffer(zconfin,YY_BUF_SIZE ); \
	} \
	YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
	}

#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)

/* Begin user sect3 */

#define zconfwrap() 1
#define YY_SKIP_YYWRAP

typedef unsigned char YY_CHAR;

FILE *zconfin = (FILE *) 0, *zconfout = (FILE *) 0;

typedef int yy_state_type;

extern int zconflineno;

int zconflineno = 1;

extern char *zconftext;
#define yytext_ptr zconftext
static yyconst flex_int16_t yy_nxt[][17] =
    {
    {
        0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
        0,    0,    0,    0,    0,    0,    0
    },

    {
       11,   12,   13,   14,   12,   12,   15,   12,   12,   12,
       12,   12,   12,   12,   12,   12,   12
    },

    {
       11,   12,   13,   14,   12,   12,   15,   12,   12,   12,
       12,   12,   12,   12,   12,   12,   12
    },

    {
       11,   16,   16,   17,   16,   16,   16,   16,   16,   16,
       16,   16,   16,   18,   16,   16,   16
    },

    {
       11,   16,   16,   17,   16,   16,   16,   16,   16,   16,
       16,   16,   16,   18,   16,   16,   16

    },

    {
       11,   19,   20,   21,   19,   19,   19,   19,   19,   19,
       19,   19,   19,   19,   19,   19,   19
    },

    {
       11,   19,   20,   21,   19,   19,   19,   19,   19,   19,
       19,   19,   19,   19,   19,   19,   19
    },

    {
       11,   22,   22,   23,   22,   24,   22,   22,   24,   22,
       22,   22,   22,   22,   22,   25,   22
    },

    {
       11,   22,   22,   23,   22,   24,   22,   22,   24,   22,
       22,   22,   22,   22,   22,   25,   22
    },

    {
       11,   26,   26,   27,   28,   29,   30,   31,   29,   32,
       33,   34,   35,   35,   36,   37,   38

    },

    {
       11,   26,   26,   27,   28,   29,   30,   31,   29,   32,
       33,   34,   35,   35,   36,   37,   38
    },

    {
      -11,  -11,  -11,  -11,  -11,  -11,  -11,  -11,  -11,  -11,
      -11,  -11,  -11,  -11,  -11,  -11,  -11
    },

    {
       11,  -12,  -12,  -12,  -12,  -12,  -12,  -12,  -12,  -12,
      -12,  -12,  -12,  -12,  -12,  -12,  -12
    },

    {
       11,  -13,   39,   40,  -13,  -13,   41,  -13,  -13,  -13,
      -13,  -13,  -13,  -13,  -13,  -13,  -13
    },

    {
       11,  -14,  -14,  -14,  -14,  -14,  -14,  -14,  -14,  -14,
      -14,  -14,  -14,  -14,  -14,  -14,  -14

    },

    {
       11,   42,   42,   43,   42,   42,   42,   42,   42,   42,
       42,   42,   42,   42,   42,   42,   42
    },

    {
       11,  -16,  -16,  -16,  -16,  -16,  -16,  -16,  -16,  -16,
      -16,  -16,  -16,  -16,  -16,  -16,  -16
    },

    {
       11,  -17,  -17,  -17,  -17,  -17,  -17,  -17,  -17,  -17,
      -17,  -17,  -17,  -17,  -17,  -17,  -17
    },

    {
       11,  -18,  -18,  -18,  -18,  -18,  -18,  -18,  -18,  -18,
      -18,  -18,  -18,   44,  -18,  -18,  -18
    },

    {
       11,   45,   45,  -19,   45,   45,   45,   45,   45,   45,
       45,   45,   45,   45,   45,   45,   45

    },

    {
       11,  -20,   46,   47,  -20,  -20,  -20,  -20,  -20,  -20,
      -20,  -20,  -20,  -20,  -20,  -20,  -20
    },

    {
       11,   48,  -21,  -21,   48,   48,   48,   48,   48,   48,
       48,   48,   48,   48,   48,   48,   48
    },

    {
       11,   49,   49,   50,   49,  -22,   49,   49,  -22,   49,
       49,   49,   49,   49,   49,  -22,   49
    },

    {
       11,  -23,  -23,  -23,  -23,  -23,  -23,  -23,  -23,  -23,
      -23,  -23,  -23,  -23,  -23,  -23,  -23
    },

    {
       11,  -24,  -24,  -24,  -24,  -24,  -24,  -24,  -24,  -24,
      -24,  -24,  -24,  -24,  -24,  -24,  -24

    },

    {
       11,   51,   51,   52,   51,   51,   51,   51,   51,   51,
       51,   51,   51,   51,   51,   51,   51
    },

    {
       11,  -26,  -26,  -26,  -26,  -26,  -26,  -26,  -26,  -26,
      -26,  -26,  -26,  -26,  -26,  -26,  -26
    },

    {
       11,  -27,  -27,  -27,  -27,  -27,  -27,  -27,  -27,  -27,
      -27,  -27,  -27,  -27,  -27,  -27,  -27
    },

    {
       11,  -28,  -28,  -28,  -28,  -28,  -28,  -28,  -28,  -28,
      -28,  -28,  -28,  -28,   53,  -28,  -28
    },

    {
       11,  -29,  -29,  -29,  -29,  -29,  -29,  -29,  -29,  -29,
      -29,  -29,  -29,  -29,  -29,  -29,  -29

    },

    {
       11,   54,   54,  -30,   54,   54,   54,   54,   54,   54,
       54,   54,   54,   54,   54,   54,   54
    },

    {
       11,  -31,  -31,  -31,  -31,  -31,  -31,   55,  -31,  -31,
      -31,  -31,  -31,  -31,  -31,  -31,  -31
    },

    {
       11,  -32,  -32,  -32,  -32,  -32,  -32,  -32,  -32,  -32,
      -32,  -32,  -32,  -32,  -32,  -32,  -32
    },

    {
       11,  -33,  -33,  -33,  -33,  -33,  -33,  -33,  -33,  -33,
      -33,  -33,  -33,  -33,  -33,  -33,  -33
    },

    {
       11,  -34,  -34,  -34,  -34,  -34,  -34,  -34,  -34,  -34,
      -34,   56,   57,   57,  -34,  -34,  -34

    },

    {
       11,  -35,  -35,  -35,  -35,  -35,  -35,  -35,  -35,  -35,
      -35,   57,   57,   57,  -35,  -35,  -35
    },

    {
       11,  -36,  -36,  -36,  -36,  -36,  -36,  -36,  -36,  -36,
      -36,  -36,  -36,  -36,  -36,  -36,  -36
    },

    {
       11,  -37,  -37,   58,  -37,  -37,  -37,  -37,  -37,  -37,
      -37,  -37,  -37,  -37,  -37,  -37,  -37
    },

    {
       11,  -38,  -38,  -38,  -38,  -38,  -38,  -38,  -38,  -38,
      -38,  -38,  -38,  -38,  -38,  -38,   59
    },

    {
       11,  -39,   39,   40,  -39,  -39,   41,  -39,  -39,  -39,
      -39,  -39,  -39,  -39,  -39,  -39,  -39

    },

    {
       11,  -40,  -40,  -40,  -40,  -40,  -40,  -40,  -40,  -40,
      -40,  -40,  -40,  -40,  -40,  -40,  -40
    },

    {
       11,   42,   42,   43,   42,   42,   42,   42,   42,   42,
       42,   42,   42,   42,   42,   42,   42
    },

    {
       11,   42,   42,   43,   42,   42,   42,   42,   42,   42,
       42,   42,   42,   42,   42,   42,   42
    },

    {
       11,  -43,  -43,  -43,  -43,  -43,  -43,  -43,  -43,  -43,
      -43,  -43,  -43,  -43,  -43,  -43,  -43
    },

    {
       11,  -44,  -44,  -44,  -44,  -44,  -44,  -44,  -44,  -44,
      -44,  -44,  -44,   44,  -44,  -44,  -44

    },

    {
       11,   45,   45,  -45,   45,   45,   45,   45,   45,   45,
       45,   45,   45,   45,   45,   45,   45
    },

    {
       11,  -46,   46,   47,  -46,  -46,  -46,  -46,  -46,  -46,
      -46,  -46,  -46,  -46,  -46,  -46,  -46
    },

    {
       11,   48,  -47,  -47,   48,   48,   48,   48,   48,   48,
       48,   48,   48,   48,   48,   48,   48
    },

    {
       11,  -48,  -48,  -48,  -48,  -48,  -48,  -48,  -48,  -48,
      -48,  -48,  -48,  -48,  -48,  -48,  -48
    },

    {
       11,   49,   49,   50,   49,  -49,   49,   49,  -49,   49,
       49,   49,   49,   49,   49,  -49,   49

    },

    {
       11,  -50,  -50,  -50,  -50,  -50,  -50,  -50,  -50,  -50,
      -50,  -50,  -50,  -50,  -50,  -50,  -50
    },

    {
       11,  -51,  -51,   52,  -51,  -51,  -51,  -51,  -51,  -51,
      -51,  -51,  -51,  -51,  -51,  -51,  -51
    },

    {
       11,  -52,  -52,  -52,  -52,  -52,  -52,  -52,  -52,  -52,
      -52,  -52,  -52,  -52,  -52,  -52,  -52
    },

    {
       11,  -53,  -53,  -53,  -53,  -53,  -53,  -53,  -53,  -53,
      -53,  -53,  -53,  -53,  -53,  -53,  -53
    },

    {
       11,   54,   54,  -54,   54,   54,   54,   54,   54,   54,
       54,   54,   54,   54,   54,   54,   54

    },

    {
       11,  -55,  -55,  -55,  -55,  -55,  -55,  -55,  -55,  -55,
      -55,  -55,  -55,  -55,  -55,  -55,  -55
    },

    {
       11,  -56,  -56,  -56,  -56,  -56,  -56,  -56,  -56,  -56,
      -56,   60,   57,   57,  -56,  -56,  -56
    },

    {
       11,  -57,  -57,  -57,  -57,  -57,  -57,  -57,  -57,  -57,
      -57,   57,   57,   57,  -57,  -57,  -57
    },

    {
       11,  -58,  -58,  -58,  -58,  -58,  -58,  -58,  -58,  -58,
      -58,  -58,  -58,  -58,  -58,  -58,  -58
    },

    {
       11,  -59,  -59,  -59,  -59,  -59,  -59,  -59,  -59,  -59,
      -59,  -59,  -59,  -59,  -59,  -59,  -59

    },

    {
       11,  -60,  -60,  -60,  -60,  -60,  -60,  -60,  -60,  -60,
      -60,   57,   57,   57,  -60,  -60,  -60
    },

    } ;

static yy_state_type yy_get_previous_state (void );
static yy_state_type yy_try_NUL_trans (yy_state_type current_state  );
static int yy_get_next_buffer (void );
static void yy_fatal_error (yyconst char msg[]  );

/* Done after the current pattern has been matched and before the
 * corresponding action - sets up zconftext.
 */
#define YY_DO_BEFORE_ACTION \
	(yytext_ptr) = yy_bp; \
	zconfleng = (size_t) (yy_cp - yy_bp); \
	(yy_hold_char) = *yy_cp; \
	*yy_cp = '\0'; \
	(yy_c_buf_p) = yy_cp;

#define YY_NUM_RULES 33
#define YY_END_OF_BUFFER 34
/* This struct is not used in this scanner,
   but its presence is necessary. */
struct yy_trans_info
	{
	flex_int32_t yy_verify;
	flex_int32_t yy_nxt;
	};
static yyconst flex_int16_t yy_accept[61] =
    {   0,
        0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
       34,    5,    4,    2,    3,    7,    8,    6,   32,   29,
       31,   24,   28,   27,   26,   22,   17,   13,   16,   20,
       22,   11,   12,   19,   19,   14,   22,   22,    4,    2,
        3,    3,    1,    6,   32,   29,   31,   30,   24,   23,
       26,   25,   15,   20,    9,   19,   19,   21,   10,   18
    } ;

static yyconst flex_int32_t yy_ec[256] =
    {   0,
        1,    1,    1,    1,    1,    1,    1,    1,    2,    3,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    2,    4,    5,    6,    1,    1,    7,    8,    9,
       10,    1,    1,    1,   11,   12,   12,   13,   13,   13,
       13,   13,   13,   13,   13,   13,   13,    1,    1,    1,
       14,    1,    1,    1,   13,   13,   13,   13,   13,   13,
       13,   13,   13,   13,   13,   13,   13,   13,   13,   13,
       13,   13,   13,   13,   13,   13,   13,   13,   13,   13,
        1,   15,    1,    1,   13,    1,   13,   13,   13,   13,

       13,   13,   13,   13,   13,   13,   13,   13,   13,   13,
       13,   13,   13,   13,   13,   13,   13,   13,   13,   13,
       13,   13,    1,   16,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,

        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
        1,    1,    1,    1,    1
    } ;

extern int zconf_flex_debug;
int zconf_flex_debug = 0;

/* The intent behind this definition is that it'll catch
 * any uses of REJECT which flex missed.
 */
#define REJECT reject_used_but_not_detected
#define yymore() yymore_used_but_not_detected
#define YY_MORE_ADJ 0
#define YY_RESTORE_YY_MORE_OFFSET
char *zconftext;

/*
 * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
 * Released under the terms of the GNU GPL v2.0.
 */

#include <limits.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>

#define LKC_DIRECT_LINK
#include "lkc.h"

#define START_STRSIZE	16

static struct {
	struct file *file;
	int lineno;
} current_pos;

static char *text;
static int text_size, text_asize;

struct buffer {
        struct buffer *parent;
        YY_BUFFER_STATE state;
};

struct buffer *current_buf;

static int last_ts, first_ts;

static void zconf_endhelp(void);
static void zconf_endfile(void);

void new_string(void)
{
	text = malloc(START_STRSIZE);
	text_asize = START_STRSIZE;
	text_size = 0;
	*text = 0;
}

void append_string(const char *str, int size)
{
	int new_size = text_size + size + 1;
	if (new_size > text_asize) {
		new_size += START_STRSIZE - 1;
		new_size &= -START_STRSIZE;
		text = realloc(text, new_size);
		text_asize = new_size;
	}
	memcpy(text + text_size, str, size);
	text_size += size;
	text[text_size] = 0;
}

void alloc_string(const char *str, int size)
{
	text = malloc(size + 1);
	memcpy(text, str, size);
	text[size] = 0;
}

#define INITIAL 0
#define COMMAND 1
#define HELP 2
#define STRING 3
#define PARAM 4

#ifndef YY_NO_UNISTD_H
/* Special case for "unistd.h", since it is non-ANSI. We include it way
 * down here because we want the user's section 1 to have been scanned first.
 * The user has a chance to override it with an option.
 */
#include <unistd.h>
#endif

#ifndef YY_EXTRA_TYPE
#define YY_EXTRA_TYPE void *
#endif

static int yy_init_globals (void );

/* Macros after this point can all be overridden by user definitions in
 * section 1.
 */

#ifndef YY_SKIP_YYWRAP
#ifdef __cplusplus
extern "C" int zconfwrap (void );
#else
extern int zconfwrap (void );
#endif
#endif

    static void yyunput (int c,char *buf_ptr  );
    
#ifndef yytext_ptr
static void yy_flex_strncpy (char *,yyconst char *,int );
#endif

#ifdef YY_NEED_STRLEN
static int yy_flex_strlen (yyconst char * );
#endif

#ifndef YY_NO_INPUT

#ifdef __cplusplus
static int yyinput (void );
#else
static int input (void );
#endif

#endif

/* Amount of stuff to slurp up with each read. */
#ifndef YY_READ_BUF_SIZE
#define YY_READ_BUF_SIZE 8192
#endif

/* Copy whatever the last rule matched to the standard output. */
#ifndef ECHO
/* This used to be an fputs(), but since the string might contain NUL's,
 * we now use fwrite().
 */
#define ECHO (void) fwrite( zconftext, zconfleng, 1, zconfout )
#endif

/* Gets input and stuffs it into "buf".  number of characters read, or YY_NULL,
 * is returned in "result".
 */
#ifndef YY_INPUT
#define YY_INPUT(buf,result,max_size) \
	errno=0; \
	while ( (result = read( fileno(zconfin), (char *) buf, max_size )) < 0 ) \
	{ \
		if( errno != EINTR) \
		{ \
			YY_FATAL_ERROR( "input in flex scanner failed" ); \
			break; \
		} \
		errno=0; \
		clearerr(zconfin); \
	}\
\

#endif

/* No semi-colon after return; correct usage is to write "yyterminate();" -
 * we don't want an extra ';' after the "return" because that will cause
 * some compilers to complain about unreachable statements.
 */
#ifndef yyterminate
#define yyterminate() return YY_NULL
#endif

/* Number of entries by which start-condition stack grows. */
#ifndef YY_START_STACK_INCR
#define YY_START_STACK_INCR 25
#endif

/* Report a fatal error. */
#ifndef YY_FATAL_ERROR
#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
#endif

/* end tables serialization structures and prototypes */

/* Default declaration of generated scanner - a define so the user can
 * easily add parameters.
 */
#ifndef YY_DECL
#define YY_DECL_IS_OURS 1

extern int zconflex (void);

#define YY_DECL int zconflex (void)
#endif /* !YY_DECL */

/* Code executed at the beginning of each rule, after zconftext and zconfleng
 * have been set up.
 */
#ifndef YY_USER_ACTION
#define YY_USER_ACTION
#endif

/* Code executed at the end of each rule. */
#ifndef YY_BREAK
#define YY_BREAK break;
#endif

#define YY_RULE_SETUP \
	YY_USER_ACTION

/** The main scanner function which does all the work.
 */
YY_DECL
{
	register yy_state_type yy_current_state;
	register char *yy_cp, *yy_bp;
	register int yy_act;
    
	int str = 0;
	int ts, i;

	if ( !(yy_init) )
		{
		(yy_init) = 1;

#ifdef YY_USER_INIT
		YY_USER_INIT;
#endif

		if ( ! (yy_start) )
			(yy_start) = 1;	/* first start state */

		if ( ! zconfin )
			zconfin = stdin;

		if ( ! zconfout )
			zconfout = stdout;

		if ( ! YY_CURRENT_BUFFER ) {
			zconfensure_buffer_stack ();
			YY_CURRENT_BUFFER_LVALUE =
				zconf_create_buffer(zconfin,YY_BUF_SIZE );
		}

		zconf_load_buffer_state( );
		}

	while ( 1 )		/* loops until end-of-file is reached */
		{
		yy_cp = (yy_c_buf_p);

		/* Support of zconftext. */
		*yy_cp = (yy_hold_char);

		/* yy_bp points to the position in yy_ch_buf of the start of
		 * the current run.
		 */
		yy_bp = yy_cp;

		yy_current_state = (yy_start);
yy_match:
		while ( (yy_current_state = yy_nxt[yy_current_state][ yy_ec[YY_SC_TO_UI(*yy_cp)]  ]) > 0 )
			++yy_cp;

		yy_current_state = -yy_current_state;

yy_find_action:
		yy_act = yy_accept[yy_current_state];

		YY_DO_BEFORE_ACTION;

do_action:	/* This label is used only to access EOF actions. */

		switch ( yy_act )
	{ /* beginning of action switch */
case 1:
/* rule 1 can match eol */
case 2:
/* rule 2 can match eol */
YY_RULE_SETUP
{
	current_file->lineno++;
	return T_EOL;
}
	YY_BREAK
case 3:
YY_RULE_SETUP

	YY_BREAK
case 4:
YY_RULE_SETUP
{
	BEGIN(COMMAND);
}
	YY_BREAK
case 5:
YY_RULE_SETUP
{
	unput(zconftext[0]);
	BEGIN(COMMAND);
}
	YY_BREAK

case 6:
YY_RULE_SETUP
{
		struct kconf_id *id = kconf_id_lookup(zconftext, zconfleng);
		BEGIN(PARAM);
		current_pos.file = current_file;
		current_pos.lineno = current_file->lineno;
		if (id && id->flags & TF_COMMAND) {
			zconflval.id = id;
			return id->token;
		}
		alloc_string(zconftext, zconfleng);
		zconflval.string = text;
		return T_WORD;
	}
	YY_BREAK
case 7:
YY_RULE_SETUP

	YY_BREAK
case 8:
/* rule 8 can match eol */
YY_RULE_SETUP
{
		BEGIN(INITIAL);
		current_file->lineno++;
		return T_EOL;
	}
	YY_BREAK

case 9:
YY_RULE_SETUP
return T_AND;
	YY_BREAK
case 10:
YY_RULE_SETUP
return T_OR;
	YY_BREAK
case 11:
YY_RULE_SETUP
return T_OPEN_PAREN;
	YY_BREAK
case 12:
YY_RULE_SETUP
return T_CLOSE_PAREN;
	YY_BREAK
case 13:
YY_RULE_SETUP
return T_NOT;
	YY_BREAK
case 14:
YY_RULE_SETUP
return T_EQUAL;
	YY_BREAK
case 15:
YY_RULE_SETUP
return T_UNEQUAL;
	YY_BREAK
case 16:
YY_RULE_SETUP
{
		str = zconftext[0];
		new_string();
		BEGIN(STRING);
	}
	YY_BREAK
case 17:
/* rule 17 can match eol */
YY_RULE_SETUP
BEGIN(INITIAL); current_file->lineno++; return T_EOL;
	YY_BREAK
case 18:
YY_RULE_SETUP
/* ignore */
	YY_BREAK
case 19:
YY_RULE_SETUP
{
		struct kconf_id *id = kconf_id_lookup(zconftext, zconfleng);
		if (id && id->flags & TF_PARAM) {
			zconflval.id = id;
			return id->token;
		}
		alloc_string(zconftext, zconfleng);
		zconflval.string = text;
		return T_WORD;
	}
	YY_BREAK
case 20:
YY_RULE_SETUP
/* comment */
	YY_BREAK
case 21:
/* rule 21 can match eol */
YY_RULE_SETUP
current_file->lineno++;
	YY_BREAK
case 22:
YY_RULE_SETUP

	YY_BREAK
case YY_STATE_EOF(PARAM):
{
		BEGIN(INITIAL);
	}
	YY_BREAK

case 23:
/* rule 23 can match eol */
*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */
(yy_c_buf_p) = yy_cp -= 1;
YY_DO_BEFORE_ACTION; /* set up zconftext again */
YY_RULE_SETUP
{
		append_string(zconftext, zconfleng);
		zconflval.string = text;
		return T_WORD_QUOTE;
	}
	YY_BREAK
case 24:
YY_RULE_SETUP
{
		append_string(zconftext, zconfleng);
	}
	YY_BREAK
case 25:
/* rule 25 can match eol */
*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */
(yy_c_buf_p) = yy_cp -= 1;
YY_DO_BEFORE_ACTION; /* set up zconftext again */
YY_RULE_SETUP
{
		append_string(zconftext + 1, zconfleng - 1);
		zconflval.string = text;
		return T_WORD_QUOTE;
	}
	YY_BREAK
case 26:
YY_RULE_SETUP
{
		append_string(zconftext + 1, zconfleng - 1);
	}
	YY_BREAK
case 27:
YY_RULE_SETUP
{
		if (str == zconftext[0]) {
			BEGIN(PARAM);
			zconflval.string = text;
			return T_WORD_QUOTE;
		} else
			append_string(zconftext, 1);
	}
	YY_BREAK
case 28:
/* rule 28 can match eol */
YY_RULE_SETUP
{
		printf("%s:%d:warning: multi-line strings not supported\n", zconf_curname(), zconf_lineno());
		current_file->lineno++;
		BEGIN(INITIAL);
		return T_EOL;
	}
	YY_BREAK
case YY_STATE_EOF(STRING):
{
		BEGIN(INITIAL);
	}
	YY_BREAK

case 29:
YY_RULE_SETUP
{
		ts = 0;
		for (i = 0; i < zconfleng; i++) {
			if (zconftext[i] == '\t')
				ts = (ts & ~7) + 8;
			else
				ts++;
		}
		last_ts = ts;
		if (first_ts) {
			if (ts < first_ts) {
				zconf_endhelp();
				return T_HELPTEXT;
			}
			ts -= first_ts;
			while (ts > 8) {
				append_string("        ", 8);
				ts -= 8;
			}
			append_string("        ", ts);
		}
	}
	YY_BREAK
case 30:
/* rule 30 can match eol */
*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */
(yy_c_buf_p) = yy_cp -= 1;
YY_DO_BEFORE_ACTION; /* set up zconftext again */
YY_RULE_SETUP
{
		current_file->lineno++;
		zconf_endhelp();
		return T_HELPTEXT;
	}
	YY_BREAK
case 31:
/* rule 31 can match eol */
YY_RULE_SETUP
{
		current_file->lineno++;
		append_string("\n", 1);
	}
	YY_BREAK
case 32:
YY_RULE_SETUP
{
		append_string(zconftext, zconfleng);
		if (!first_ts)
			first_ts = last_ts;
	}
	YY_BREAK
case YY_STATE_EOF(HELP):
{
		zconf_endhelp();
		return T_HELPTEXT;
	}
	YY_BREAK

case YY_STATE_EOF(INITIAL):
case YY_STATE_EOF(COMMAND):
{
	if (current_file) {
		zconf_endfile();
		return T_EOL;
	}
	fclose(zconfin);
	yyterminate();
}
	YY_BREAK
case 33:
YY_RULE_SETUP
YY_FATAL_ERROR( "flex scanner jammed" );
	YY_BREAK

	case YY_END_OF_BUFFER:
		{
		/* Amount of text matched not including the EOB char. */
		int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;

		/* Undo the effects of YY_DO_BEFORE_ACTION. */
		*yy_cp = (yy_hold_char);
		YY_RESTORE_YY_MORE_OFFSET

		if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
			{
			/* We're scanning a new file or input source.  It's
			 * possible that this happened because the user
			 * just pointed zconfin at a new source and called
			 * zconflex().  If so, then we have to assure
			 * consistency between YY_CURRENT_BUFFER and our
			 * globals.  Here is the right place to do so, because
			 * this is the first action (other than possibly a
			 * back-up) that will match for the new input source.
			 */
			(yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
			YY_CURRENT_BUFFER_LVALUE->yy_input_file = zconfin;
			YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
			}

		/* Note that here we test for yy_c_buf_p "<=" to the position
		 * of the first EOB in the buffer, since yy_c_buf_p will
		 * already have been incremented past the NUL character
		 * (since all states make transitions on EOB to the
		 * end-of-buffer state).  Contrast this with the test
		 * in input().
		 */
		if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
			{ /* This was really a NUL. */
			yy_state_type yy_next_state;

			(yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;

			yy_current_state = yy_get_previous_state(  );

			/* Okay, we're now positioned to make the NUL
			 * transition.  We couldn't have
			 * yy_get_previous_state() go ahead and do it
			 * for us because it doesn't know how to deal
			 * with the possibility of jamming (and we don't
			 * want to build jamming into it because then it
			 * will run more slowly).
			 */

			yy_next_state = yy_try_NUL_trans( yy_current_state );

			yy_bp = (yytext_ptr) + YY_MORE_ADJ;

			if ( yy_next_state )
				{
				/* Consume the NUL. */
				yy_cp = ++(yy_c_buf_p);
				yy_current_state = yy_next_state;
				goto yy_match;
				}

			else
				{
				yy_cp = (yy_c_buf_p);
				goto yy_find_action;
				}
			}

		else switch ( yy_get_next_buffer(  ) )
			{
			case EOB_ACT_END_OF_FILE:
				{
				(yy_did_buffer_switch_on_eof) = 0;

				if ( zconfwrap( ) )
					{
					/* Note: because we've taken care in
					 * yy_get_next_buffer() to have set up
					 * zconftext, we can now set up
					 * yy_c_buf_p so that if some total
					 * hoser (like flex itself) wants to
					 * call the scanner after we return the
					 * YY_NULL, it'll still work - another
					 * YY_NULL will get returned.
					 */
					(yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;

					yy_act = YY_STATE_EOF(YY_START);
					goto do_action;
					}

				else
					{
					if ( ! (yy_did_buffer_switch_on_eof) )
						YY_NEW_FILE;
					}
				break;
				}

			case EOB_ACT_CONTINUE_SCAN:
				(yy_c_buf_p) =
					(yytext_ptr) + yy_amount_of_matched_text;

				yy_current_state = yy_get_previous_state(  );

				yy_cp = (yy_c_buf_p);
				yy_bp = (yytext_ptr) + YY_MORE_ADJ;
				goto yy_match;

			case EOB_ACT_LAST_MATCH:
				(yy_c_buf_p) =
				&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];

				yy_current_state = yy_get_previous_state(  );

				yy_cp = (yy_c_buf_p);
				yy_bp = (yytext_ptr) + YY_MORE_ADJ;
				goto yy_find_action;
			}
		break;
		}

	default:
		YY_FATAL_ERROR(
			"fatal flex scanner internal error--no action found" );
	} /* end of action switch */
		} /* end of scanning one token */
} /* end of zconflex */

/* yy_get_next_buffer - try to read in a new buffer
 *
 * Returns a code representing an action:
 *	EOB_ACT_LAST_MATCH -
 *	EOB_ACT_CONTINUE_SCAN - continue scanning from current position
 *	EOB_ACT_END_OF_FILE - end of file
 */
static int yy_get_next_buffer (void)
{
    	register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
	register char *source = (yytext_ptr);
	register int number_to_move, i;
	int ret_val;

	if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
		YY_FATAL_ERROR(
		"fatal flex scanner internal error--end of buffer missed" );

	if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
		{ /* Don't try to fill the buffer, so this is an EOF. */
		if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
			{
			/* We matched a single character, the EOB, so
			 * treat this as a final EOF.
			 */
			return EOB_ACT_END_OF_FILE;
			}

		else
			{
			/* We matched some text prior to the EOB, first
			 * process it.
			 */
			return EOB_ACT_LAST_MATCH;
			}
		}

	/* Try to read more data. */

	/* First move last chars to start of buffer. */
	number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;

	for ( i = 0; i < number_to_move; ++i )
		*(dest++) = *(source++);

	if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
		/* don't do the read, it's not guaranteed to return an EOF,
		 * just force an EOF
		 */
		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;

	else
		{
			int num_to_read =
			YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;

		while ( num_to_read <= 0 )
			{ /* Not enough room in the buffer - grow it. */

			/* just a shorter name for the current buffer */
			YY_BUFFER_STATE b = YY_CURRENT_BUFFER;

			int yy_c_buf_p_offset =
				(int) ((yy_c_buf_p) - b->yy_ch_buf);

			if ( b->yy_is_our_buffer )
				{
				int new_size = b->yy_buf_size * 2;

				if ( new_size <= 0 )
					b->yy_buf_size += b->yy_buf_size / 8;
				else
					b->yy_buf_size *= 2;

				b->yy_ch_buf = (char *)
					/* Include room in for 2 EOB chars. */
					zconfrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2  );
				}
			else
				/* Can't grow it, we don't own it. */
				b->yy_ch_buf = 0;

			if ( ! b->yy_ch_buf )
				YY_FATAL_ERROR(
				"fatal error - scanner input buffer overflow" );

			(yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];

			num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
						number_to_move - 1;

			}

		if ( num_to_read > YY_READ_BUF_SIZE )
			num_to_read = YY_READ_BUF_SIZE;

		/* Read in more data. */
		YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
			(yy_n_chars), num_to_read );

		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
		}

	if ( (yy_n_chars) == 0 )
		{
		if ( number_to_move == YY_MORE_ADJ )
			{
			ret_val = EOB_ACT_END_OF_FILE;
			zconfrestart(zconfin  );
			}

		else
			{
			ret_val = EOB_ACT_LAST_MATCH;
			YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
				YY_BUFFER_EOF_PENDING;
			}
		}

	else
		ret_val = EOB_ACT_CONTINUE_SCAN;

	(yy_n_chars) += number_to_move;
	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;

	(yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];

	return ret_val;
}

/* yy_get_previous_state - get the state just before the EOB char was reached */

    static yy_state_type yy_get_previous_state (void)
{
	register yy_state_type yy_current_state;
	register char *yy_cp;
    
	yy_current_state = (yy_start);

	for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
		{
		yy_current_state = yy_nxt[yy_current_state][(*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1)];
		}

	return yy_current_state;
}

/* yy_try_NUL_trans - try to make a transition on the NUL character
 *
 * synopsis
 *	next_state = yy_try_NUL_trans( current_state );
 */
    static yy_state_type yy_try_NUL_trans  (yy_state_type yy_current_state )
{
	register int yy_is_jam;
    
	yy_current_state = yy_nxt[yy_current_state][1];
	yy_is_jam = (yy_current_state <= 0);

	return yy_is_jam ? 0 : yy_current_state;
}

    static void yyunput (int c, register char * yy_bp )
{
	register char *yy_cp;
    
    yy_cp = (yy_c_buf_p);

	/* undo effects of setting up zconftext */
	*yy_cp = (yy_hold_char);

	if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
		{ /* need to shift things up to make room */
		/* +2 for EOB chars. */
		register int number_to_move = (yy_n_chars) + 2;
		register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
					YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
		register char *source =
				&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];

		while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
			*--dest = *--source;

		yy_cp += (int) (dest - source);
		yy_bp += (int) (dest - source);
		YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
			(yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;

		if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
			YY_FATAL_ERROR( "flex scanner push-back overflow" );
		}

	*--yy_cp = (char) c;

	(yytext_ptr) = yy_bp;
	(yy_hold_char) = *yy_cp;
	(yy_c_buf_p) = yy_cp;
}

#ifndef YY_NO_INPUT
#ifdef __cplusplus
    static int yyinput (void)
#else
    static int input  (void)
#endif

{
	int c;
    
	*(yy_c_buf_p) = (yy_hold_char);

	if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
		{
		/* yy_c_buf_p now points to the character we want to return.
		 * If this occurs *before* the EOB characters, then it's a
		 * valid NUL; if not, then we've hit the end of the buffer.
		 */
		if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
			/* This was really a NUL. */
			*(yy_c_buf_p) = '\0';

		else
			{ /* need more input */
			int offset = (yy_c_buf_p) - (yytext_ptr);
			++(yy_c_buf_p);

			switch ( yy_get_next_buffer(  ) )
				{
				case EOB_ACT_LAST_MATCH:
					/* This happens because yy_g_n_b()
					 * sees that we've accumulated a
					 * token and flags that we need to
					 * try matching the token before
					 * proceeding.  But for input(),
					 * there's no matching to consider.
					 * So convert the EOB_ACT_LAST_MATCH
					 * to EOB_ACT_END_OF_FILE.
					 */

					/* Reset buffer status. */
					zconfrestart(zconfin );

					/*FALLTHROUGH*/

				case EOB_ACT_END_OF_FILE:
					{
					if ( zconfwrap( ) )
						return EOF;

					if ( ! (yy_did_buffer_switch_on_eof) )
						YY_NEW_FILE;
#ifdef __cplusplus
					return yyinput();
#else
					return input();
#endif
					}

				case EOB_ACT_CONTINUE_SCAN:
					(yy_c_buf_p) = (yytext_ptr) + offset;
					break;
				}
			}
		}

	c = *(unsigned char *) (yy_c_buf_p);	/* cast for 8-bit char's */
	*(yy_c_buf_p) = '\0';	/* preserve zconftext */
	(yy_hold_char) = *++(yy_c_buf_p);

	return c;
}
#endif	/* ifndef YY_NO_INPUT */

/** Immediately switch to a different input stream.
 * @param input_file A readable stream.
 * 
 * @note This function does not reset the start condition to @c INITIAL .
 */
    void zconfrestart  (FILE * input_file )
{
    
	if ( ! YY_CURRENT_BUFFER ){
        zconfensure_buffer_stack ();
		YY_CURRENT_BUFFER_LVALUE =
            zconf_create_buffer(zconfin,YY_BUF_SIZE );
	}

	zconf_init_buffer(YY_CURRENT_BUFFER,input_file );
	zconf_load_buffer_state( );
}

/** Switch to a different input buffer.
 * @param new_buffer The new input buffer.
 * 
 */
    void zconf_switch_to_buffer  (YY_BUFFER_STATE  new_buffer )
{
    
	/* TODO. We should be able to replace this entire function body
	 * with
	 *		zconfpop_buffer_state();
	 *		zconfpush_buffer_state(new_buffer);
     */
	zconfensure_buffer_stack ();
	if ( YY_CURRENT_BUFFER == new_buffer )
		return;

	if ( YY_CURRENT_BUFFER )
		{
		/* Flush out information for old buffer. */
		*(yy_c_buf_p) = (yy_hold_char);
		YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
		}

	YY_CURRENT_BUFFER_LVALUE = new_buffer;
	zconf_load_buffer_state( );

	/* We don't actually know whether we did this switch during
	 * EOF (zconfwrap()) processing, but the only time this flag
	 * is looked at is after zconfwrap() is called, so it's safe
	 * to go ahead and always set it.
	 */
	(yy_did_buffer_switch_on_eof) = 1;
}

static void zconf_load_buffer_state  (void)
{
    	(yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
	(yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
	zconfin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
	(yy_hold_char) = *(yy_c_buf_p);
}

/** Allocate and initialize an input buffer state.
 * @param file A readable stream.
 * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
 * 
 * @return the allocated buffer state.
 */
    YY_BUFFER_STATE zconf_create_buffer  (FILE * file, int  size )
{
	YY_BUFFER_STATE b;
    
	b = (YY_BUFFER_STATE) zconfalloc(sizeof( struct yy_buffer_state )  );
	if ( ! b )
		YY_FATAL_ERROR( "out of dynamic memory in zconf_create_buffer()" );

	b->yy_buf_size = size;

	/* yy_ch_buf has to be 2 characters longer than the size given because
	 * we need to put in 2 end-of-buffer characters.
	 */
	b->yy_ch_buf = (char *) zconfalloc(b->yy_buf_size + 2  );
	if ( ! b->yy_ch_buf )
		YY_FATAL_ERROR( "out of dynamic memory in zconf_create_buffer()" );

	b->yy_is_our_buffer = 1;

	zconf_init_buffer(b,file );

	return b;
}

/** Destroy the buffer.
 * @param b a buffer created with zconf_create_buffer()
 * 
 */
    void zconf_delete_buffer (YY_BUFFER_STATE  b )
{
    
	if ( ! b )
		return;

	if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
		YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;

	if ( b->yy_is_our_buffer )
		zconffree((void *) b->yy_ch_buf  );

	zconffree((void *) b  );
}

/* Initializes or reinitializes a buffer.
 * This function is sometimes called more than once on the same buffer,
 * such as during a zconfrestart() or at EOF.
 */
    static void zconf_init_buffer  (YY_BUFFER_STATE  b, FILE * file )

{
	int oerrno = errno;
    
	zconf_flush_buffer(b );

	b->yy_input_file = file;
	b->yy_fill_buffer = 1;

    /* If b is the current buffer, then zconf_init_buffer was _probably_
     * called from zconfrestart() or through yy_get_next_buffer.
     * In that case, we don't want to reset the lineno or column.
     */
    if (b != YY_CURRENT_BUFFER){
        b->yy_bs_lineno = 1;
        b->yy_bs_column = 0;
    }

        b->yy_is_interactive = 0;
    
	errno = oerrno;
}

/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
 * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
 * 
 */
    void zconf_flush_buffer (YY_BUFFER_STATE  b )
{
    	if ( ! b )
		return;

	b->yy_n_chars = 0;

	/* We always need two end-of-buffer characters.  The first causes
	 * a transition to the end-of-buffer state.  The second causes
	 * a jam in that state.
	 */
	b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
	b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;

	b->yy_buf_pos = &b->yy_ch_buf[0];

	b->yy_at_bol = 1;
	b->yy_buffer_status = YY_BUFFER_NEW;

	if ( b == YY_CURRENT_BUFFER )
		zconf_load_buffer_state( );
}

/** Pushes the new state onto the stack. The new state becomes
 *  the current state. This function will allocate the stack
 *  if necessary.
 *  @param new_buffer The new state.
 *  
 */
void zconfpush_buffer_state (YY_BUFFER_STATE new_buffer )
{
    	if (new_buffer == NULL)
		return;

	zconfensure_buffer_stack();

	/* This block is copied from zconf_switch_to_buffer. */
	if ( YY_CURRENT_BUFFER )
		{
		/* Flush out information for old buffer. */
		*(yy_c_buf_p) = (yy_hold_char);
		YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
		}

	/* Only push if top exists. Otherwise, replace top. */
	if (YY_CURRENT_BUFFER)
		(yy_buffer_stack_top)++;
	YY_CURRENT_BUFFER_LVALUE = new_buffer;

	/* copied from zconf_switch_to_buffer. */
	zconf_load_buffer_state( );
	(yy_did_buffer_switch_on_eof) = 1;
}

/** Removes and deletes the top of the stack, if present.
 *  The next element becomes the new top.
 *  
 */
void zconfpop_buffer_state (void)
{
    	if (!YY_CURRENT_BUFFER)
		return;

	zconf_delete_buffer(YY_CURRENT_BUFFER );
	YY_CURRENT_BUFFER_LVALUE = NULL;
	if ((yy_buffer_stack_top) > 0)
		--(yy_buffer_stack_top);

	if (YY_CURRENT_BUFFER) {
		zconf_load_buffer_state( );
		(yy_did_buffer_switch_on_eof) = 1;
	}
}

/* Allocates the stack if it does not exist.
 *  Guarantees space for at least one push.
 */
static void zconfensure_buffer_stack (void)
{
	int num_to_alloc;
    
	if (!(yy_buffer_stack)) {

		/* First allocation is just for 2 elements, since we don't know if this
		 * scanner will even need a stack. We use 2 instead of 1 to avoid an
		 * immediate realloc on the next call.
         */
		num_to_alloc = 1;
		(yy_buffer_stack) = (struct yy_buffer_state**)zconfalloc
								(num_to_alloc * sizeof(struct yy_buffer_state*)
								);
		
		memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
				
		(yy_buffer_stack_max) = num_to_alloc;
		(yy_buffer_stack_top) = 0;
		return;
	}

	if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){

		/* Increase the buffer to prepare for a possible push. */
		int grow_size = 8 /* arbitrary grow size */;

		num_to_alloc = (yy_buffer_stack_max) + grow_size;
		(yy_buffer_stack) = (struct yy_buffer_state**)zconfrealloc
								((yy_buffer_stack),
								num_to_alloc * sizeof(struct yy_buffer_state*)
								);

		/* zero only the new slots.*/
		memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
		(yy_buffer_stack_max) = num_to_alloc;
	}
}

/** Setup the input buffer state to scan directly from a user-specified character buffer.
 * @param base the character buffer
 * @param size the size in bytes of the character buffer
 * 
 * @return the newly allocated buffer state object. 
 */
YY_BUFFER_STATE zconf_scan_buffer  (char * base, yy_size_t  size )
{
	YY_BUFFER_STATE b;
    
	if ( size < 2 ||
	     base[size-2] != YY_END_OF_BUFFER_CHAR ||
	     base[size-1] != YY_END_OF_BUFFER_CHAR )
		/* They forgot to leave room for the EOB's. */
		return 0;

	b = (YY_BUFFER_STATE) zconfalloc(sizeof( struct yy_buffer_state )  );
	if ( ! b )
		YY_FATAL_ERROR( "out of dynamic memory in zconf_scan_buffer()" );

	b->yy_buf_size = size - 2;	/* "- 2" to take care of EOB's */
	b->yy_buf_pos = b->yy_ch_buf = base;
	b->yy_is_our_buffer = 0;
	b->yy_input_file = 0;
	b->yy_n_chars = b->yy_buf_size;
	b->yy_is_interactive = 0;
	b->yy_at_bol = 1;
	b->yy_fill_buffer = 0;
	b->yy_buffer_status = YY_BUFFER_NEW;

	zconf_switch_to_buffer(b  );

	return b;
}

/** Setup the input buffer state to scan a string. The next call to zconflex() will
 * scan from a @e copy of @a str.
 * @param yystr a NUL-terminated string to scan
 * 
 * @return the newly allocated buffer state object.
 * @note If you want to scan bytes that may contain NUL values, then use
 *       zconf_scan_bytes() instead.
 */
YY_BUFFER_STATE zconf_scan_string (yyconst char * yystr )
{
    
	return zconf_scan_bytes(yystr,strlen(yystr) );
}

/** Setup the input buffer state to scan the given bytes. The next call to zconflex() will
 * scan from a @e copy of @a bytes.
 * @param bytes the byte buffer to scan
 * @param len the number of bytes in the buffer pointed to by @a bytes.
 * 
 * @return the newly allocated buffer state object.
 */
YY_BUFFER_STATE zconf_scan_bytes  (yyconst char * yybytes, int  _yybytes_len )
{
	YY_BUFFER_STATE b;
	char *buf;
	yy_size_t n;
	int i;
    
	/* Get memory for full buffer, including space for trailing EOB's. */
	n = _yybytes_len + 2;
	buf = (char *) zconfalloc(n  );
	if ( ! buf )
		YY_FATAL_ERROR( "out of dynamic memory in zconf_scan_bytes()" );

	for ( i = 0; i < _yybytes_len; ++i )
		buf[i] = yybytes[i];

	buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;

	b = zconf_scan_buffer(buf,n );
	if ( ! b )
		YY_FATAL_ERROR( "bad buffer in zconf_scan_bytes()" );

	/* It's okay to grow etc. this buffer, and we should throw it
	 * away when we're done.
	 */
	b->yy_is_our_buffer = 1;

	return b;
}

#ifndef YY_EXIT_FAILURE
#define YY_EXIT_FAILURE 2
#endif

static void yy_fatal_error (yyconst char* msg )
{
    	(void) fprintf( stderr, "%s\n", msg );
	exit( YY_EXIT_FAILURE );
}

/* Redefine yyless() so it works in section 3 code. */

#undef yyless
#define yyless(n) \
	do \
		{ \
		/* Undo effects of setting up zconftext. */ \
        int yyless_macro_arg = (n); \
        YY_LESS_LINENO(yyless_macro_arg);\
		zconftext[zconfleng] = (yy_hold_char); \
		(yy_c_buf_p) = zconftext + yyless_macro_arg; \
		(yy_hold_char) = *(yy_c_buf_p); \
		*(yy_c_buf_p) = '\0'; \
		zconfleng = yyless_macro_arg; \
		} \
	while ( 0 )

/* Accessor  methods (get/set functions) to struct members. */

/** Get the current line number.
 * 
 */
int zconfget_lineno  (void)
{
        
    return zconflineno;
}

/** Get the input stream.
 * 
 */
FILE *zconfget_in  (void)
{
        return zconfin;
}

/** Get the output stream.
 * 
 */
FILE *zconfget_out  (void)
{
        return zconfout;
}

/** Get the length of the current token.
 * 
 */
int zconfget_leng  (void)
{
        return zconfleng;
}

/** Get the current token.
 * 
 */

char *zconfget_text  (void)
{
        return zconftext;
}

/** Set the current line number.
 * @param line_number
 * 
 */
void zconfset_lineno (int  line_number )
{
    
    zconflineno = line_number;
}

/** Set the input stream. This does not discard the current
 * input buffer.
 * @param in_str A readable stream.
 * 
 * @see zconf_switch_to_buffer
 */
void zconfset_in (FILE *  in_str )
{
        zconfin = in_str ;
}

void zconfset_out (FILE *  out_str )
{
        zconfout = out_str ;
}

int zconfget_debug  (void)
{
        return zconf_flex_debug;
}

void zconfset_debug (int  bdebug )
{
        zconf_flex_debug = bdebug ;
}

static int yy_init_globals (void)
{
        /* Initialization is the same as for the non-reentrant scanner.
     * This function is called from zconflex_destroy(), so don't allocate here.
     */

    (yy_buffer_stack) = 0;
    (yy_buffer_stack_top) = 0;
    (yy_buffer_stack_max) = 0;
    (yy_c_buf_p) = (char *) 0;
    (yy_init) = 0;
    (yy_start) = 0;

/* Defined in main.c */
#ifdef YY_STDINIT
    zconfin = stdin;
    zconfout = stdout;
#else
    zconfin = (FILE *) 0;
    zconfout = (FILE *) 0;
#endif

    /* For future reference: Set errno on error, since we are called by
     * zconflex_init()
     */
    return 0;
}

/* zconflex_destroy is for both reentrant and non-reentrant scanners. */
int zconflex_destroy  (void)
{
    
    /* Pop the buffer stack, destroying each element. */
	while(YY_CURRENT_BUFFER){
		zconf_delete_buffer(YY_CURRENT_BUFFER  );
		YY_CURRENT_BUFFER_LVALUE = NULL;
		zconfpop_buffer_state();
	}

	/* Destroy the stack itself. */
	zconffree((yy_buffer_stack) );
	(yy_buffer_stack) = NULL;

    /* Reset the globals. This is important in a non-reentrant scanner so the next time
     * zconflex() is called, initialization will occur. */
    yy_init_globals( );

    return 0;
}

/*
 * Internal utility routines.
 */

#ifndef yytext_ptr
static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
{
	register int i;
	for ( i = 0; i < n; ++i )
		s1[i] = s2[i];
}
#endif

#ifdef YY_NEED_STRLEN
static int yy_flex_strlen (yyconst char * s )
{
	register int n;
	for ( n = 0; s[n]; ++n )
		;

	return n;
}
#endif

void *zconfalloc (yy_size_t  size )
{
	return (void *) malloc( size );
}

void *zconfrealloc  (void * ptr, yy_size_t  size )
{
	/* The cast to (char *) in the following accommodates both
	 * implementations that use char* generic pointers, and those
	 * that use void* generic pointers.  It works with the latter
	 * because both ANSI C and C++ allow castless assignment from
	 * any pointer type to void*, and deal with argument conversions
	 * as though doing an assignment.
	 */
	return (void *) realloc( (char *) ptr, size );
}

void zconffree (void * ptr )
{
	free( (char *) ptr );	/* see zconfrealloc() for (char *) cast */
}

#define YYTABLES_NAME "yytables"

void zconf_starthelp(void)
{
	new_string();
	last_ts = first_ts = 0;
	BEGIN(HELP);
}

static void zconf_endhelp(void)
{
	zconflval.string = text;
	BEGIN(INITIAL);
}

/*
 * Try to open specified file with following names:
 * ./name
 * $(srctree)/name
 * The latter is used when srctree is separate from objtree
 * when compiling the kernel.
 * Return NULL if file is not found.
 */
FILE *zconf_fopen(const char *name)
{
	char *env, fullname[PATH_MAX+1];
	FILE *f;

	f = fopen(name, "r");
	if (!f && name[0] != '/') {
		env = getenv(SRCTREE);
		if (env) {
			sprintf(fullname, "%s/%s", env, name);
			f = fopen(fullname, "r");
		}
	}
	return f;
}

void zconf_initscan(const char *name)
{
	zconfin = zconf_fopen(name);
	if (!zconfin) {
		printf("can't find file %s\n", name);
		exit(1);
	}

	current_buf = malloc(sizeof(*current_buf));
	memset(current_buf, 0, sizeof(*current_buf));

	current_file = file_lookup(name);
	current_file->lineno = 1;
	current_file->flags = FILE_BUSY;
}

void zconf_nextfile(const char *name)
{
	struct file *file = file_lookup(name);
	struct buffer *buf = malloc(sizeof(*buf));
	memset(buf, 0, sizeof(*buf));

	current_buf->state = YY_CURRENT_BUFFER;
	zconfin = zconf_fopen(name);
	if (!zconfin) {
		printf("%s:%d: can't open file \"%s\"\n", zconf_curname(), zconf_lineno(), name);
		exit(1);
	}
	zconf_switch_to_buffer(zconf_create_buffer(zconfin,YY_BUF_SIZE));
	buf->parent = current_buf;
	current_buf = buf;

	if (file->flags & FILE_BUSY) {
		printf("recursive scan (%s)?\n", name);
		exit(1);
	}
	if (file->flags & FILE_SCANNED) {
		printf("file %s already scanned?\n", name);
		exit(1);
	}
	file->flags |= FILE_BUSY;
	file->lineno = 1;
	file->parent = current_file;
	current_file = file;
}

static void zconf_endfile(void)
{
	struct buffer *parent;

	current_file->flags |= FILE_SCANNED;
	current_file->flags &= ~FILE_BUSY;
	current_file = current_file->parent;

	parent = current_buf->parent;
	if (parent) {
		fclose(zconfin);
		zconf_delete_buffer(YY_CURRENT_BUFFER);
		zconf_switch_to_buffer(parent->state);
	}
	free(current_buf);
	current_buf = parent;
}

int zconf_lineno(void)
{
	return current_pos.lineno;
}

char *zconf_curname(void)
{
	return current_pos.file ? current_pos.file->name : "<none>";
}