| Fri, 17 Aug 2012 18:54:00 -0500 |
Rob Landley |
Fix ".config is a directory" error with uClibc++.
|
| Thu, 16 Aug 2012 21:59:27 -0500 |
Rob Landley |
Fix source/target confusion that bites Fedora host = target builds.
|
| Fri, 27 Jul 2012 08:56:55 -0500 |
Rob Landley |
Workaround for sh4 bug.
|
| Wed, 25 Jul 2012 08:25:24 -0500 |
Rob Landley |
The 3.5 kernel and toybox 0.4.0. Some fixes likely to be required.
|
| Sun, 10 Jun 2012 20:34:04 -0500 |
Rob Landley |
Minor cleanup and remove hardlinking for chroot-splice: it's slower and uses more disk space but doesn't damage external copy if something goes wrong.
|
| Sun, 10 Jun 2012 20:32:15 -0500 |
Rob Landley |
Move some non-toybox releated busybox config entries up above the "discard this if building toybox" cutoff.
|
| Tue, 05 Jun 2012 20:58:28 -0500 |
Rob Landley |
Fix arm for 3.4 kernel.
|
| Sun, 27 May 2012 21:36:22 -0500 |
Rob Landley |
Linux 3.4 is out.
|
| Sun, 20 May 2012 15:32:30 -0500 |
Rob Landley |
Upgrade uClibc to next dot-release, which has a bugfix for the LFS build.
|
| Sat, 12 May 2012 21:35:58 -0500 |
Rob Landley |
Oops, forgot to check in patch removed by busybox upgrade.
|
| Thu, 10 May 2012 22:04:19 -0500 |
Rob Landley |
Upgrade to busybox-1.20.0.
|
| Thu, 10 May 2012 22:03:22 -0500 |
Rob Landley |
Switch x86_64 from nptl back to pthreads. This isn't the correct fix but uClibc apparently never tested nptl on x86-64, and one of the assembly files doesn't support PIC.
|
| Sat, 28 Apr 2012 20:41:56 -0500 |
Rob Landley |
Tell m68k how to use qemu (even though it doesn't work yet).
|
| Sat, 21 Apr 2012 23:11:28 -0500 |
Rob Landley |
Switch armv4l from NPTL back to pthreads instead of trying to patch uClibc into submission just now. arm-oabi is legacy support, need to swap the stack unwinding type to get NPTL to work with it.
|
| Thu, 19 Apr 2012 00:09:11 -0500 |
Rob Landley |
Upgrade to uClibc 0.9.33.1 (and use NPTL), and busybox 1.19.4.
|
| Mon, 16 Apr 2012 21:31:22 -0500 |
Rob Landley |
The Gentoo version of patch is broken, and can't apply patches unless TMPDIR is set, so add it to the whitelist.
|
| Sun, 15 Apr 2012 00:44:14 -0500 |
Rob Landley |
Bug fix: DEBUG_PACKAGE shouldn't pollute NO_CLEANUP.
|
| Sat, 24 Mar 2012 22:33:32 -0500 |
Rob Landley |
Combining KCONFIG_ALLSYMS=<() sometimes works, but not always. Just use a file.
|
| Sat, 24 Mar 2012 20:29:50 -0500 |
Rob Landley |
Make tarball extract failure detection not rely on "kill" command.
|
| Sat, 24 Mar 2012 19:40:48 -0500 |
Rob Landley |
Error paths need the kill and killall commands.
|
| Sat, 24 Mar 2012 18:16:29 -0500 |
Rob Landley |
Brown-paper-bag bug: sanitize_environment assembles a whitelist in an environment variable, and didn't include that variable in the whitelist. (So if the variable name was already used, it wouldn't be at the end of the list, and would blank itself, and everything after it...)
|
| Thu, 22 Mar 2012 20:36:36 -0500 |
Rob Landley |
Remove a patch that was merged into linux 3.3.
|
| Wed, 21 Mar 2012 17:48:10 -0500 |
Rob Landley |
Leave STAGE_DIR alone and add STAGE_USR instead.
|
| Wed, 21 Mar 2012 17:47:20 -0500 |
Rob Landley |
Another attempt to make more/record-commands.sh and host-tools.sh play together.
|
| Wed, 21 Mar 2012 17:45:39 -0500 |
Rob Landley |
Revert debug code accidentally checked in.
|
| Mon, 19 Mar 2012 17:25:50 -0500 |
Rob Landley |
Linux 3.3.
|
| Fri, 16 Mar 2012 07:00:09 -0500 |
Rob Landley |
Teach busybox.build to switch off toybox-supplied functionality when TOYBOX=toybox, and move one more config symbol after toybox marker.
|
| Fri, 16 Mar 2012 06:58:28 -0500 |
Rob Landley |
switch on utmpx.h (it's posix-2008).
|
| Fri, 16 Mar 2012 06:56:47 -0500 |
Rob Landley |
stpcpy is posix-2008, requiring _GNU_DAMMIT to enable it is a bug.
|
| Thu, 15 Mar 2012 22:37:25 -0500 |
Rob Landley |
Fix record-commands.sh regression with oldpath going recursive when sources/incldue.sh is source twice.
|
| Thu, 15 Mar 2012 22:36:30 -0500 |
Rob Landley |
The toybox build should also support BUILD_VERBOSE.
|
| Wed, 14 Mar 2012 06:19:21 -0500 |
Rob Landley |
Fix PATH setting sequence so using more/record-commands.sh to wrap the host $PATH, (I.E. run it before running host-tools.sh) doesn't die unable to find mkdir.
|
| Wed, 14 Mar 2012 06:17:51 -0500 |
Rob Landley |
Collate config entries supplid by toybox at end of baseconfig-busybox, so I can work out a way to switch them off later.
|
| Sat, 04 Feb 2012 23:20:53 -0600 |
Rob Landley |
Fix toybox build script.
|
| Sat, 04 Feb 2012 13:29:02 -0600 |
Rob Landley |
Fix toybox build script.
|
| Sat, 04 Feb 2012 12:15:19 -0600 |
Rob Landley |
Add diagnostic message for a bug that bit me more than once.
|
| Fri, 03 Feb 2012 12:16:14 -0600 |
Rob Landley |
Forgot to check in the updated web pages announcing the new release.
|
| Sun, 29 Jan 2012 10:20:30 -0600 |
Rob Landley |
Added tag 1.1.1 for changeset ef315a8461c0
|
| Sun, 29 Jan 2012 00:21:10 -0600 |
Rob Landley |
uClibc 0.9.31.1 is out.
1.1.1
|
| Sat, 28 Jan 2012 20:40:58 -0600 |
Rob Landley |
Allow buildall to do multiple native control-images, and put control image name in native-*.txt log.
|
| Sat, 28 Jan 2012 19:33:07 -0600 |
Rob Landley |
Resubmitted patch upstream, minor cleanup.
|
| Sat, 28 Jan 2012 19:03:59 -0600 |
Rob Landley |
New busybox release, and a more config symbols.
|
| Sat, 28 Jan 2012 19:03:25 -0600 |
Rob Landley |
Yet more gratuitous guard symbols in the linux config, this time for powerpc.
|
| Sun, 22 Jan 2012 18:42:57 -0600 |
Rob Landley |
One more command I missed.
|
| Sun, 22 Jan 2012 18:38:58 -0600 |
Rob Landley |
Replace cpp with cc -E so it's funneled through ccwrap as well.
|
| Thu, 12 Jan 2012 08:44:22 -0600 |
Rob Landley |
More busybox symbols, some needed by buildall.sh and some on command line.
|
| Wed, 11 Jan 2012 05:59:31 -0600 |
Rob Landley |
Document target /usr/sbin/record-commands wrapper.
|
| Mon, 09 Jan 2012 21:03:28 -0600 |
Rob Landley |
Suppress some warnings.
|
| Mon, 09 Jan 2012 06:48:59 -0600 |
Rob Landley |
Unbreak network in 3.2.
|
| Sat, 07 Jan 2012 17:20:16 -0600 |
Rob Landley |
Upgrade to 3.2 kernel.
|
| Sun, 01 Jan 2012 13:51:04 -0600 |
Rob Landley |
If CPUS isn't set, calculate it. KVM or chroot can have >1.
|
| Sun, 01 Jan 2012 05:04:32 -0600 |
Rob Landley |
Add ability to build toybox.
|
| Wed, 28 Dec 2011 16:01:32 -0600 |
Rob Landley |
Fix "cofnig" typo.
|
| Wed, 28 Dec 2011 15:58:43 -0600 |
Rob Landley |
Remove alt-patch symlinks from source control, instead add more/alt-patches.sh to setup alt-package-*.patch symlinks (you can then delete any you don't want).
|
| Wed, 28 Dec 2011 12:57:07 -0600 |
Rob Landley |
Cleanup busybox config: remove redundant entries and trailing whitespace, add CONFIG_TEST=y.
|
| Tue, 27 Dec 2011 08:59:51 -0600 |
Rob Landley |
Fix sparc dynamic linker.
|
| Tue, 27 Dec 2011 08:58:16 -0600 |
Rob Landley |
Switch from busybox defconfig to baseconfig-busybox selecting just what we need, with a config variable to use defconfig instead if you really want that.
|
| Thu, 22 Dec 2011 16:49:03 -0600 |
Rob Landley |
Tweak CPUS calculation again: don't overcommit when using hyper-threading.
|
| Thu, 22 Dec 2011 13:29:11 -0600 |
Rob Landley |
Commit 1468 was a giant thinko: fix it. (System emulation, not application emulation...)
|
| Mon, 19 Dec 2011 20:59:25 -0600 |
Rob Landley |
If host kernel hasn't got devtmpfs, call mdev -s. (Mostly for chroot-setup.sh.)
|
| Sun, 18 Dec 2011 13:34:35 -0600 |
Rob Landley |
Fix sparc kernel's relocation code.
|
| Tue, 06 Dec 2011 21:29:16 -0600 |
Rob Landley |
Add record-commands wrapper and plumbing to target image, so you can record-commands /mnt/init in a native build.
|
| Tue, 06 Dec 2011 21:15:59 -0600 |
Rob Landley |
Optional second argument to build.sh indicates which stage to start rebuilding from after a successful first build.
|
| Tue, 06 Dec 2011 08:25:48 -0600 |
Rob Landley |
Add "host" target to more/test.sh in case somebody doesn't want any target loaded.
|
| Sat, 03 Dec 2011 17:51:38 -0600 |
Rob Landley |
Pass through more/record-commands.sh wrapper variables in enviroment variable whitelisting.
|
| Sat, 03 Dec 2011 17:50:58 -0600 |
Rob Landley |
QEMU 1.0 changed the 'qemu' binary to 'qemu-i386', change run-emulator.sh for x86 to match.
|
| Fri, 02 Dec 2011 07:26:24 -0600 |
Rob Landley |
Expand more/test.sh documentation with "rebuilding uClibc but not binutils/gcc" example.
|
| Mon, 07 Nov 2011 07:37:06 -0600 |
Rob Landley |
Patch to add mkostemp to uClibc, which util-linux needs in LFS 6.8.
|
| Thu, 27 Oct 2011 08:23:45 -0500 |
Rob Landley |
Patch that got merged in 3.1, deleted locally. Apparently mercurial's "hg diff" doesn't show missing files...
|
| Mon, 24 Oct 2011 22:59:30 -0500 |
Rob Landley |
Fix smoketest to look for static-tools output in the new place.
|
| Mon, 24 Oct 2011 22:57:58 -0500 |
Rob Landley |
Update to 3.1 kernel.
|
| Sat, 22 Oct 2011 19:38:29 -0500 |
Rob Landley |
e2fsprogs version bump, because it's there.
|
| Thu, 20 Oct 2011 02:07:10 -0500 |
Rob Landley |
Switch USE_UNSTABLE to USE_ALT and download.sh's UNSTABLE= to ALT= so naming is consistent with the alt- prefixes on packages and patches.
|
| Thu, 20 Oct 2011 02:05:11 -0500 |
Rob Landley |
New FAQ, "why don't your prebuilt binaries work in my ancient root filesystem". Which is more about ancient kernels not having new system calls, really...
|
| Thu, 20 Oct 2011 02:03:48 -0500 |
Rob Landley |
Oops, the SYSIMAGE_TYPE=ext2 SYSIMAGE_HDA_MEGS stuff never quite got completed when root-image was split out from system-image. Make that work.
|
| Thu, 20 Oct 2011 02:02:10 -0500 |
Rob Landley |
Add ability to specify a package to rebuild to build.sh with REBUILD= (and then dependencies take it from there to the system image).
|
| Thu, 20 Oct 2011 02:01:23 -0500 |
Rob Landley |
Add mirell's HTML version of the presentation slides to the nav list.
|
| Sun, 09 Oct 2011 18:28:30 -0500 |
Rob Landley |
Stop ldd spewing debug messages.
|
| Sun, 09 Oct 2011 18:27:33 -0500 |
Rob Landley |
Last release's web page announcement went on the site but not into the repo.
|
| Sun, 09 Oct 2011 15:39:57 -0500 |
Rob Landley |
Yet another busybox patch tweak to fix issue noted by John Spencer.
|
| Sun, 02 Oct 2011 23:26:29 -0500 |
Rob Landley |
Added tag 1.1.0 for changeset 707beb993e13
|
| Thu, 29 Sep 2011 19:27:00 -0500 |
Rob Landley |
Trivial cleanup.
1.1.0
|
| Thu, 29 Sep 2011 19:26:26 -0500 |
Rob Landley |
Upgrade busybox to 1.19.2, which folds in two patches.
|
| Sun, 25 Sep 2011 22:09:33 -0500 |
Rob Landley |
more/test.sh shouldn't zap output directory.
|
| Fri, 23 Sep 2011 14:38:11 -0500 |
Rob Landley |
Make ccwrap use --start-group and --end-group rather than specifying the same libraries multiple times.
|
| Sun, 18 Sep 2011 21:37:31 -0500 |
Rob Landley |
Make chroot-splice.sh more useful for testing new control images in a chroot instead of qemu.
|
| Sun, 18 Sep 2011 13:03:05 -0500 |
Rob Landley |
Save buildall-native.sh output in build/ not (build/native-static). Update comments a lot.
|
| Sat, 17 Sep 2011 00:01:20 -0500 |
Rob Landley |
Fix setup-chroot when used with relative path, and VERBOSE option
|
| Wed, 14 Sep 2011 13:09:22 -0500 |
Rob Landley |
Hardwire CPUS=3 in dev-environment.sh distcc support until scalability limits addressed.
|
| Tue, 13 Sep 2011 16:27:21 -0500 |
Rob Landley |
Announce current target in more/for-each-target.sh
|
| Tue, 13 Sep 2011 16:09:37 -0500 |
Rob Landley |
Build the cross compiler's ldd/ldconfig for the correct architecture. (Sigh.)
|
| Mon, 12 Sep 2011 10:54:25 -0500 |
Rob Landley |
Make timeout duration configurable.
|
| Sat, 10 Sep 2011 08:28:32 -0500 |
Rob Landley |
Try to auto-balance FORK=1 and CPUS so as not to overload build server.
|
| Sat, 10 Sep 2011 08:28:00 -0500 |
Rob Landley |
Cleanups to init script.
|
| Sat, 10 Sep 2011 08:03:10 -0500 |
Rob Landley |
Use the ext4 driver for ext3 and ext2 filesystems.
|
| Mon, 05 Sep 2011 14:06:06 +0200 |
Alessio Igor Bogani |
Add dev-environment.sh support for virtio targets
|
| Mon, 05 Sep 2011 08:49:08 +0200 |
Alessio Igor Bogani |
Get rid of of two old and now unused variables
|
| Thu, 08 Sep 2011 08:41:40 -0500 |
Rob Landley |
Spelling contributors' names right is a good thing.
|
| Thu, 08 Sep 2011 08:40:28 -0500 |
Rob Landley |
Fix the lfs-bootstrap m4 hang.
|
| Fri, 02 Sep 2011 16:36:40 -0500 |
Rob Landley |
Remove old Gentoo From Scratch debris, it's basically CROSS_TARGET and KARCH.
|
| Tue, 23 Aug 2011 08:42:18 -0500 |
Rob Landley |
Update the web page with release announcement. (And fix the wordwrapping problem small screens have apparently had since january.)
|
| Tue, 23 Aug 2011 08:21:48 -0500 |
Rob Landley |
Fiddle with the downloads/binaries layout yet again, and update README for it.
|
| Tue, 23 Aug 2011 08:21:15 -0500 |
Rob Landley |
Added tag 1.0.3 for changeset 4aceeceefb2d
|
| Sun, 21 Aug 2011 20:51:42 -0500 |
Rob Landley |
Reasonable guess at an m68k mac config, in hopes qemu grows emulation soon.
1.0.3
|
| Sat, 20 Aug 2011 15:16:04 -0500 |
Rob Landley |
Fix ppc440.
|
| Sat, 20 Aug 2011 12:26:25 -0500 |
Rob Landley |
Fix the busybox patch I sent upstream to work with hunks at the start of file.
|
| Tue, 16 Aug 2011 13:48:35 -0500 |
Rob Landley |
Fix for less from Denys.
|
| Mon, 15 Aug 2011 07:06:40 -0500 |
Rob Landley |
Busybox 1.19.0 and two patches to make it work.
|
| Sun, 07 Aug 2011 04:18:21 -0500 |
Rob Landley |
Revert sh4 breakage.
|
| Tue, 02 Aug 2011 12:06:00 +0200 |
Alessio Igor Bogani |
Add powerpc-virtio target
|
| Tue, 02 Aug 2011 12:01:15 +0200 |
Alessio Igor Bogani |
Invoke qemu instead of kvm
|
| Tue, 02 Aug 2011 11:10:54 +0200 |
Alessio Igor Bogani |
Rename i686-kvm to i686-virtio
|
| Fri, 29 Jul 2011 20:49:08 -0500 |
Rob Landley |
Cosmetic tweak, with FORK=1 download.sh shouldn't announce it's done until it is.
|
| Tue, 26 Jul 2011 13:03:15 -0500 |
Rob Landley |
Bring back fixmips patch, it didn't get merged into 3.0.
|
| Sun, 24 Jul 2011 13:55:31 -0500 |
Rob Landley |
Switch uClibc to 0.9.32, which simplifies the patch stack a lot but adds a few new ones.
|
| Sun, 24 Jul 2011 13:37:22 -0500 |
Rob Landley |
Actually stop after the first failed patch.
|
| Sat, 23 Jul 2011 21:58:24 -0500 |
Rob Landley |
Now that the control-images have their own repository, remove them from this one.
|
| Sat, 23 Jul 2011 21:55:29 -0500 |
Rob Landley |
Tweak download message when using manual build/package/alt-* setup.
|
| Sat, 23 Jul 2011 21:20:06 -0500 |
Rob Landley |
Linux kernel 3.0.
|
| Sat, 23 Jul 2011 18:35:10 -0500 |
Rob Landley |
Use devtmpfs instead of mdev.
|
| Tue, 19 Jul 2011 06:43:16 -0500 |
Rob Landley |
Did they really ship a uClibc release that didn't build on x86?
|
| Tue, 19 Jul 2011 06:41:39 -0500 |
Rob Landley |
Test uClibc 0.9.32.
|
| Tue, 19 Jul 2011 06:39:53 -0500 |
Rob Landley |
Delete a leftover comment from the days when we put stuff in /tools by default. (Wow that's old...)
|
| Wed, 06 Jul 2011 07:09:53 -0500 |
Rob Landley |
Don't create build/packages _and_ $SRCTREE, they should be the same and when they aren't the first is wrong.
|
| Tue, 05 Jul 2011 08:39:59 -0500 |
Rob Landley |
Create smoketest-report.sh producing CSV with more info.
|
| Sun, 03 Jul 2011 13:09:48 -0500 |
Rob Landley |
First attempt at for-each-target didn't work with the new layout due to really stupid bug.
|
| Sat, 02 Jul 2011 20:31:49 -0500 |
Rob Landley |
Use dropbear fix static linking patch from dropbear maintainer.
|
| Wed, 29 Jun 2011 07:47:05 -0500 |
Rob Landley |
Fix variant target bug where linux-kernel.sh was using the base architecture name to create the stage tarball. It was both wrong and didn't work when we hadn't built the base architecture yet.
|
| Mon, 27 Jun 2011 07:53:54 -0500 |
Rob Landley |
Make i686-kvm actually use kvm.
|
| Mon, 27 Jun 2011 07:44:19 -0500 |
Rob Landley |
Add quick and dirty toy to filter out baseconfig entries from miniconfig.sh output to give LINUX_CONFIG entry for a target settings file.
|
| Mon, 27 Jun 2011 07:36:56 -0500 |
Rob Landley |
Add m68k back.
|
| Mon, 27 Jun 2011 07:36:31 -0500 |
Rob Landley |
Convert architectures. (Putting m68k back next checking, mercurial got confused.)
|
| Mon, 27 Jun 2011 06:40:25 -0500 |
Rob Landley |
Add base_architecture, make base architectures and extra targets work, and move i586 virtio stuff to new i686-kvm target.
|
| Sun, 26 Jun 2011 20:09:37 -0500 |
Rob Landley |
Remove one more "settings" dependency from functions.sh, and convert lots of architecture configurations from directory to file.
|
| Sun, 26 Jun 2011 19:25:19 -0500 |
Rob Landley |
See if i486 can be converted from directory to file in one go, or if mercurial loses its lunch.
|
| Sun, 26 Jun 2011 17:44:02 -0500 |
Rob Landley |
Replace read_arch_dir with load_target, which understands that sources/targets/$TARGET can be a file or a directory.
|
| Sun, 26 Jun 2011 17:42:52 -0500 |
Rob Landley |
Add a FAQ about android.
|
| Wed, 22 Jun 2011 11:46:10 +0200 |
Alessio Igor Bogani |
Move i586 to virtio
|
| Thu, 23 Jun 2011 07:41:05 -0500 |
Rob Landley |
Print better error message for bad architecture name, idea from Alessio Igor Bogani.
|
| Wed, 22 Jun 2011 12:53:22 -0500 |
Rob Landley |
Try uClibc 0.9.31.1.
|
| Wed, 22 Jun 2011 12:51:19 -0500 |
Rob Landley |
Upgrade to dropbear 0.53.1 and fix its' broken static linking.
|
| Sun, 19 Jun 2011 21:51:42 -0500 |
Rob Landley |
Make /mnt/init work with more/chroot-splice.sh.
|
| Fri, 17 Jun 2011 13:00:17 -0500 |
Rob Landley |
Fix BINARY_PACKAGE_TARBALLS generation: some packages produce no output (zlib used to build dropbear for example), and thus check for an empty list before trying to make a tarball.
|
| Fri, 17 Jun 2011 12:42:12 -0500 |
Rob Landley |
Remove FWL debris and rename do_rename to do_manifest while we're at it. (Based on prompting from Alessio Bogani).
|
| Fri, 17 Jun 2011 12:15:34 +0200 |
Alessio Igor Bogani |
Update MANIFEST file
|
| Fri, 17 Jun 2011 11:26:31 +0200 |
Alessio Igor Bogani |
Avoid sanitizing useful *_proxy environment variables
|
| Fri, 17 Jun 2011 11:24:53 +0200 |
Alessio Igor Bogani |
Remove useless symlink
|
| Wed, 15 Jun 2011 23:22:39 +0200 |
Alessio Igor Bogani |
Update links
|
| Wed, 15 Jun 2011 23:22:07 +0200 |
Alessio Igor Bogani |
Remove dead links
|
| Wed, 15 Jun 2011 23:21:12 +0200 |
Alessio Igor Bogani |
Fix a little typo
|
| Thu, 16 Jun 2011 13:20:43 -0500 |
Rob Landley |
Make ppc440 less wrong. Still need a proper bamboo board setup.
|
| Thu, 16 Jun 2011 13:20:06 -0500 |
Rob Landley |
Instead of NTFS, build in v9fs/virtfs.
|
| Thu, 16 Jun 2011 13:19:35 -0500 |
Rob Landley |
Check in the release announcement for the web page.
|
| Thu, 16 Jun 2011 08:36:42 -0500 |
Rob Landley |
Clean up cronjob.sh (buildall.sh sets host to i686, FORK=1 is server-specific so shouldn't be hardwired in, and pulling from a script that's in the repository you're pulling is just icky.)
|
| Thu, 16 Jun 2011 07:41:10 -0500 |
Rob Landley |
Fix from Geoffroy Weisenhorn: on 32-bit hosts mktimeconst needs 1L<<31 to be an _unsigned_ long constant.
|
| Wed, 15 Jun 2011 20:11:39 -0500 |
Rob Landley |
Rebuilding root-image should also rebuild linux-kernel for initramfs builds.
|
| Wed, 15 Jun 2011 20:10:45 -0500 |
Rob Landley |
Fix broken comment.
|
| Tue, 14 Jun 2011 20:48:07 -0500 |
Rob Landley |
Added tag 1.0.2 for changeset a9685aea2a2c
|
| Sun, 12 Jun 2011 22:37:01 -0500 |
Rob Landley |
Don't require objective C on the host, no matter what weird things ./configure does.
1.0.2
|
| Sun, 12 Jun 2011 17:17:57 -0500 |
Rob Landley |
Get sh4 working again thanks to kernel .config and qemu invocation Khem Raj.
|
| Sun, 12 Jun 2011 03:28:39 -0500 |
Rob Landley |
Clean up powerpc config.
|
| Sun, 12 Jun 2011 01:26:17 -0500 |
Rob Landley |
Convert powerpc miniconfig-linux to baseconfig.
|
| Sat, 11 Jun 2011 22:43:24 -0500 |
Rob Landley |
Merge description files into settings files as $DESCRIPTION entry.
|
| Fri, 10 Jun 2011 21:10:37 -0500 |
Rob Landley |
Add a FAQ about miniconfigs.
|
| Fri, 10 Jun 2011 21:09:30 -0500 |
Rob Landley |
Check in some more project history I wrote. (Nobody should care but me, sort of blog-ish.)
|
| Fri, 10 Jun 2011 21:08:26 -0500 |
Rob Landley |
Remove accidentally duplicated news entries.
|
| Fri, 10 Jun 2011 21:07:18 -0500 |
Rob Landley |
Add alt-linux patch symlinks so building unstable linux snapshots is more likely to work.
|
| Fri, 10 Jun 2011 21:05:58 -0500 |
Rob Landley |
Fix initramfs packaging (never fixed gen_init_cpio.c into sources/toys, best to use the copy out of the Linux source anyway).
|
| Tue, 07 Jun 2011 21:56:45 -0500 |
Rob Landley |
Fix armv6l, for details see http://lists.nongnu.org/archive/html/qemu-devel/2011-06/msg00829.html
|
| Sat, 28 May 2011 07:12:44 -0500 |
Rob Landley |
Update to busybox 1.18.4 (fixes the wget hang).
|
| Sat, 28 May 2011 06:06:38 -0500 |
Rob Landley |
Patch to fix mips malta target on 2.6.39.
|
| Tue, 24 May 2011 02:06:22 -0500 |
Rob Landley |
Move root's home directory to /home/root, which is A) known writeable space so dropbear can have a .ssh directory if it needs one, B) frees up /root to be a virtfs mount point of the host's root filesystem.
|
| Tue, 24 May 2011 02:00:52 -0500 |
Rob Landley |
Make bisectinate actually use the LONG=1 test.
|
| Tue, 24 May 2011 02:00:11 -0500 |
Rob Landley |
The migrate-kernel script doesn't need to include the initramfs settings in its config. (Facepalm.)
|
| Sun, 22 May 2011 06:09:29 -0500 |
Rob Landley |
Upgrade to 2.6.39 kernel.
|
| Sun, 22 May 2011 04:18:30 -0500 |
Rob Landley |
Combine set_titlebar and "echo ===" stuff into announce() function. Consistently output target/stage info, and yank redundant instances.
|
| Sun, 22 May 2011 04:13:54 -0500 |
Rob Landley |
Update migrate-kernel.sh to work with baseconfigs.
|
| Sat, 21 May 2011 23:38:59 -0500 |
Rob Landley |
Cosmetic tweak to miniconfig script.
|
| Sat, 21 May 2011 23:37:31 -0500 |
Rob Landley |
Kick uClibc 0.9.32-rc3 to UNSTABLE for the moment, and put 0.9.31 back in stable, with its old patch stack.
|
| Sat, 21 May 2011 22:56:09 -0500 |
Rob Landley |
Remove toybox patches, no longer using that in this project.
|
| Wed, 04 May 2011 02:04:17 -0500 |
Rob Landley |
Speed up miniconfig by introducing "stride" (discard lines in batches).
|
| Mon, 18 Apr 2011 22:51:21 -0500 |
Rob Landley |
Convert downloads/README into build-stages.html
|
| Mon, 18 Apr 2011 19:34:48 -0500 |
Rob Landley |
Update FAQ now that setup-chroot is in the system images.
|
| Mon, 18 Apr 2011 18:41:04 -0500 |
Rob Landley |
Split up system-image.sh into root-image.sh, linux-kernel.sh, and system-image.sh. Rename CROSS_HOST_ARCH to CROSS_COMPILER_HOST.
|
| Mon, 18 Apr 2011 08:04:46 -0500 |
Rob Landley |
Example variables should have "export" in front of them so you can just uncomment the line and have it work.
|
| Mon, 18 Apr 2011 08:02:06 -0500 |
Rob Landley |
Update to squashfs 4.2.
|
| Wed, 13 Apr 2011 11:05:47 -0500 |
Rob Landley |
Change SYSIMAGE_HDA_MEGS default to 2 gigs: it only applies to ext2 and if you're specifying that you probably want some scratch space.
|
| Wed, 13 Apr 2011 03:07:02 -0500 |
Rob Landley |
Move do_in_chroot in control-images to setup-choot in system-image, and move zapchroot into system-image as well. New setup-chroot is more flexible, copying whatever existing host mounts you've got and with the ability to re-enter an existing chroot (if the target directory exists it'll just setup and tear down the bind mounts again without copying files).
|
| Sun, 03 Apr 2011 15:09:19 -0500 |
Rob Landley |
2.6.38 kernel no longer has config symbol for PACKET_MMAP.
|
| Sun, 03 Apr 2011 15:08:35 -0500 |
Rob Landley |
Add BUILD_NATIVE_ONLY and NO_CLEAN controls to buildall.sh. Also break out the hdb.img creation and do that single threaded for all targets, then reuse the scratch drives. (Avoids triggering timeout.sh due to disk thrashing on large FORK=1 builds.)
|
| Sun, 03 Apr 2011 15:05:11 -0500 |
Rob Landley |
Factor out make-hdb.sh from dev-environment.sh.
|
| Sun, 03 Apr 2011 15:03:33 -0500 |
Rob Landley |
More typos from Alan Post.
|
| Tue, 22 Mar 2011 06:51:49 -0500 |
Rob Landley |
Many typos, spotted by Alan Post.
|
| Fri, 18 Mar 2011 23:20:13 -0500 |
Rob Landley |
Switch to from pthreads.old to NPTL.
|
| Fri, 18 Mar 2011 23:19:02 -0500 |
Rob Landley |
Update to linux-2.6.38 and uClibc-0.9.32-rc3.
|
| Fri, 18 Mar 2011 23:16:19 -0500 |
Rob Landley |
Remove lots of patches (and add one) for uClibc 0.9.32 release candidates.
|
| Fri, 18 Mar 2011 23:02:13 -0500 |
Rob Landley |
Switch to the noperl patches for 2.6.38.
|
| Fri, 18 Mar 2011 19:28:50 -0500 |
Rob Landley |
Might as well preserve hard links while assembling root-filsystem. Neither busybox tar nor mksquashfs are currently using them, but maybe someday...
|
| Fri, 18 Mar 2011 05:58:35 -0500 |
Rob Landley |
If sha1sum isn't installed, download falls back through all the mirrors repeatedly downloading stuff, without explaining why it failed.
|
| Mon, 14 Mar 2011 19:07:38 -0500 |
Rob Landley |
Forgot to check in that last news update. Oops.
|
| Mon, 14 Mar 2011 19:06:29 -0500 |
Rob Landley |
Update .hgignore
|
| Mon, 14 Mar 2011 18:46:08 -0500 |
Rob Landley |
Fix regression: make #!/bin/sh point to bash instead of busybox shell for dev environment. (Oops.)
|
| Wed, 09 Feb 2011 21:06:18 -0600 |
Rob Landley |
impactlinux.com is just an alias for landley.net now, remove it from mirror list.
|
| Wed, 09 Feb 2011 21:05:54 -0600 |
Rob Landley |
Update config for uClibc 0.9.32-rc2. Which almost works right.
|
| Wed, 09 Feb 2011 20:58:33 -0600 |
Rob Landley |
Update busybox, and update uClibc and linux to test versions that should ship soon. Update patches directory to match.
|
| Tue, 08 Feb 2011 12:11:04 -0600 |
Rob Landley |
Albert Lee spotted that libnsl went away after 0.9.11 due to the baseconfig stuff dropping a uClibc symbol. Put it back.
|
| Sat, 22 Jan 2011 14:40:00 -0600 |
Rob Landley |
Teach ccwrap to switch off -xc after command line sources listed, so cc doesn't try to interpret libc and such as C sources.
|
| Wed, 09 Feb 2011 21:10:04 -0600 |
Rob Landley |
Update news and sidebars.
|
| Mon, 10 Jan 2011 08:26:02 -0600 |
Rob Landley |
Bring bootraw patch up to 2.6.37 so it doesn't need fuzz factor support to apply (which busybox patch doesn't do, and which is a bad idea anyway because fuzz has the annoying habit of silently applying hunks in the wrong place and introducing _subtle_ bugs).
|
| Sat, 08 Jan 2011 19:58:33 -0600 |
Rob Landley |
Update a couple more links.
|
| Sat, 08 Jan 2011 04:29:00 -0600 |
Rob Landley |
Missed a path when I renamed native-build to control-images.
|
| Fri, 07 Jan 2011 21:21:34 -0600 |
Rob Landley |
2.6.37 kernel.
|
| Fri, 07 Jan 2011 01:15:01 -0600 |
Rob Landley |
Clean up old references to impactlinux.com, add a FAQ explaining why that site went away, and start the long and winding process of redoing documentation.hmtl.
|
| Mon, 03 Jan 2011 02:08:33 -0600 |
Rob Landley |
Announce 1.0.1.
|
| Mon, 03 Jan 2011 02:08:13 -0600 |
Rob Landley |
Added tag 1.0.1 for changeset a44deb7b4ee0
|
| Wed, 08 Dec 2010 02:42:07 -0600 |
Rob Landley |
Busybox 1.18.0 doesn't build on Ubuntu 9.04. This fixes it.
1.0.1
|
| Fri, 03 Dec 2010 21:47:10 -0600 |
Rob Landley |
Need -fpic to build a shared libarary.
|
| Fri, 03 Dec 2010 21:21:32 -0600 |
Rob Landley |
Update another README.
|
| Fri, 03 Dec 2010 21:20:28 -0600 |
Rob Landley |
Update some READMEs.
|
| Fri, 03 Dec 2010 20:18:50 -0600 |
Rob Landley |
Fix the includes.
|
| Fri, 03 Dec 2010 00:09:32 -0600 |
Rob Landley |
Move clean.sh into more since it isn't a build stage.
|
| Thu, 02 Dec 2010 21:00:47 -0600 |
Rob Landley |
Remove debris accidentally checked in.
|
| Thu, 02 Dec 2010 20:59:07 -0600 |
Rob Landley |
A nolink build doesn't need the find -L hack.
|
| Thu, 02 Dec 2010 20:57:19 -0600 |
Rob Landley |
Backport some uClibc bits so udev will build against 0.9.31.
|
| Thu, 02 Dec 2010 18:17:20 -0600 |
Rob Landley |
New busybox release.
|
| Wed, 01 Dec 2010 17:57:46 -0600 |
Rob Landley |
Add script.nolink option for packages that really don't like the whole 'tree of symlinks' thing. Migrate vim and remove the -L hack.
|
| Wed, 01 Dec 2010 03:03:18 -0600 |
Rob Landley |
Add /sbin to the $PATH in the system image. (Oops.)
|
| Wed, 01 Dec 2010 03:02:34 -0600 |
Rob Landley |
Don't delete hdb.img if user specified an $HDB image. (It's caller's responsibility to make sure that the scratch disk is in a usable state.)
|
| Sun, 28 Nov 2010 22:09:12 -0600 |
Rob Landley |
Documentation tweak.
|
| Sun, 28 Nov 2010 22:06:08 -0600 |
Rob Landley |
Make the module-init-tools build work on a read-only source filesystem.
|
| Tue, 23 Nov 2010 06:43:54 -0600 |
Rob Landley |
Killtree momved, update timeout.sh to be able to find it.
|
| Tue, 23 Nov 2010 03:58:41 -0600 |
Rob Landley |
Rip out uClibc internationalization (doesn't contain any codepages, just copies 'em from the host, so won't build on a host that hasn't got internationalization already installed), use gettext-stub instead of gettext, and fix udev and vim to build.
|
| Mon, 22 Nov 2010 17:53:17 -0600 |
Rob Landley |
Make more of the LFS build actually build.
|
| Mon, 22 Nov 2010 17:32:46 -0600 |
Rob Landley |
Handle package tarballs with overlapping names (thingy and thingy-test for example).
|
| Mon, 22 Nov 2010 17:31:51 -0600 |
Rob Landley |
Add the sha1sum to the LFS tarball.
|
| Mon, 22 Nov 2010 17:31:12 -0600 |
Rob Landley |
Building iproute2 needs the libresolv stub.
|
| Sun, 21 Nov 2010 19:45:47 -0600 |
Rob Landley |
Documentation on how to use the bootstrap-skeleton infrastructure.
|
| Sun, 21 Nov 2010 19:08:01 -0600 |
Rob Landley |
Move bootstrap-skeleton/files to bootstrap-skeleton/mnt, to be consistent.
|
| Sun, 21 Nov 2010 15:02:47 -0600 |
Rob Landley |
Typo, ./configure not /configure
|
| Sun, 21 Nov 2010 15:02:04 -0600 |
Rob Landley |
The LFS iproute2 build gets confused because "find -type f" in a directory created with "cp -s" skips symlinks and thus never finds anything. Use sed to add a -L to all those find invocations, to follow symlinks.
|
