| Sat, 10 Jul 2010 00:05:50 -0500 |
Rob Landley |
Fix patching so sha1-for-source.txt only gets updated _after_ patch successfully applies (race with signal delivery), and make dienow output go to stderr instead of stdout.
|
| Tue, 06 Jul 2010 12:10:26 -0500 |
Rob Landley |
Better error message.
|
| Fri, 02 Jul 2010 23:38:31 -0500 |
Rob Landley |
Add baseconfig-linux, the infrastructure to use it, and move over the arm targets. (You can override with a miniconfig-linux or miniconfig-uClibc in the appropriate target directory.)
|
| Thu, 10 Jun 2010 21:16:14 -0500 |
Rob Landley |
Cosmetic tweak, say "Extracting" instead of "Building" during EXTRACT_ALL.
|
| Tue, 08 Jun 2010 01:37:51 -0500 |
Rob Landley |
Suppress error messages from manfiest generation.
|
| Sat, 05 Jun 2010 00:10:12 -0500 |
Rob Landley |
Blank $STAGE_DIR before adjusting $PATH so building the cross-compiler stage doesn't get confused if it dies during the uClibc++ build and gets re-run (adjusting the path to point to the cross compiler we're about to delete and rebuild). Make NO_CLEANUP explicit in system-image.sh so it can rebuild zImage and squashfs independently by default.
|
| Sat, 05 Jun 2010 00:08:28 -0500 |
Rob Landley |
Add ALLOW_PATCH_FAILURE config switch to continue despite failed patches.
|
| Fri, 28 May 2010 00:44:32 -0500 |
Rob Landley |
Move wait into cleanup_oldfiles.
|
| Fri, 21 May 2010 22:26:25 -0500 |
Rob Landley |
Cleanup "FROM_ARCH" mess. Rename FROM_ARCH->HOST_ARCH, make stage script responsible for setting HOST_ARCH (not includes.sh). Also, remove HOST_UTILS variable, only build uClibc utils for non-simple compilers and bypass uClibc's (weird) makefile for the utils directory.
|
| Sun, 16 May 2010 18:25:39 -0500 |
Rob Landley |
Don't build anything statically in host-tools.sh, glibc is broken.
|
| Sun, 16 May 2010 02:26:03 -0500 |
Rob Landley |
Make BUILD_STATIC take comma separated list of packages, or "all" or "none". Default behavior should remain the same.
|
| Sat, 15 May 2010 12:41:14 -0500 |
Rob Landley |
Convert unstable() to is_in_list() taking the list to check as the second argument.
|
| Sat, 15 May 2010 12:12:39 -0500 |
Rob Landley |
Remove unnecessary "function" label from shell functions.
|
| Wed, 05 May 2010 22:57:05 -0500 |
Rob Landley |
Minor cleanup, collate the === announce lines.
|
| Thu, 08 Apr 2010 23:09:13 -0500 |
Rob Landley |
Delete empty build/temp-* directories when we're done with them.
|
| Fri, 26 Mar 2010 13:02:14 -0500 |
Rob Landley |
Bugfix by David Seikel: don't append .tar.bz2 twice to BINARY_PACKAGE_TARBALLS.
|
| Fri, 26 Mar 2010 04:57:11 -0500 |
Rob Landley |
Allow existing extracted source directry to be patched if necessary, even if tarball doesn't exist. (This lets a git bisect happen in situ under build/packages.)
|
| Sun, 14 Mar 2010 01:18:27 -0600 |
Rob Landley |
Another bug Wolfgang Denk reported: make BUILD_STATIC=none actually work.
|
| Mon, 01 Mar 2010 02:21:49 -0600 |
Rob Landley |
Add FORK=1 support to download.sh, and work around bash's $$ refusing to give an actual unique $PID for subshells by groveling around in /proc to find something usable.
|
| Mon, 01 Mar 2010 01:03:04 -0600 |
Rob Landley |
Make extract use unique temporary directories so it's parallelizable.
|
| Wed, 24 Feb 2010 10:31:10 -0600 |
Rob Landley |
Rename SKIP_STAGE_TARBALLS to NO_STAGE_TARBALLS (for consistency), and make system-image.sh use it instead of doing it by hand.
|
| Wed, 24 Feb 2010 10:08:38 -0600 |
Rob Landley |
Add export_if_blank and make lots of build paths overrideable.
|
| Fri, 05 Feb 2010 17:47:59 -0600 |
Rob Landley |
Allow patchdir to be overridden.
|
| Tue, 02 Feb 2010 19:37:11 -0600 |
Rob Landley |
Fix thinko in download_from.
|
| Thu, 28 Jan 2010 13:58:18 -0600 |
Rob Landley |
More code cleanups (rename try_checksum to confirm_checksum).
|
| Sun, 24 Jan 2010 01:19:54 -0600 |
Rob Landley |
Rename try_download() to download_from().
|
| Sun, 03 Jan 2010 17:04:39 -0600 |
Rob Landley |
Largeish refactoring and cleanup of compiler build:
|
| Tue, 22 Dec 2009 12:14:03 -0600 |
Rob Landley |
Oops, local changes I didn't mean to check in leaked. Fix it.
|
| Sun, 20 Dec 2009 19:56:21 -0600 |
Rob Landley |
Actually remove functions that got moved to utility_functions.sh.
|
| Sat, 19 Dec 2009 00:51:16 -0600 |
Rob Landley |
Teach build_section to run "*.build" sections (with setupfor/cleanup called for them) as well as "*.sh" sections which do their own setup/cleanup.
|
| Fri, 18 Dec 2009 03:36:12 -0600 |
Rob Landley |
Cosmetic tweak, have build_section spit out a === line with the sources/sections it's running.
|
| Fri, 04 Dec 2009 12:02:47 -0600 |
Rob Landley |
Break up sources/functions.sh starting with some of the more obviously independent ones.
|
| Thu, 03 Dec 2009 01:18:39 -0600 |
Rob Landley |
Don't actually replace cross-compiler with cross-static, when you build both use $PATH to select which one to use.
|
| Thu, 26 Nov 2009 14:53:29 -0600 |
Rob Landley |
Fix path_search to actually use the pattern argument.
|
| Thu, 26 Nov 2009 02:37:36 -0600 |
Rob Landley |
Genericize search path traversal logic with pattern and command to apply to each file found.
|
| Mon, 23 Nov 2009 21:58:49 -0600 |
Rob Landley |
Remove old RECORD_COMMANDS debris from host-tools.sh and simplify result (lots of white-noise from de-intenting the "else" case of an if/else), factor out wrap_path from sources/more/record-commands.sh, fix the "build host tools first, then wrap it afterwards" case.
|
| Sun, 22 Nov 2009 03:56:04 -0600 |
Rob Landley |
Fix hw-target builds so prerequisites build if they don't already exist.
|
| Sat, 21 Nov 2009 04:27:58 -0600 |
Rob Landley |
Redo command recording: no longer RECORD_COMMMANDS config entry, now sources/more/record-commands.sh run to set up the wrapper (either before or after host-tools.sh). General cleanup and simplification of code this interacted with, plus clean up bit rot in the reporting.
|
| Sun, 11 Oct 2009 00:58:34 -0500 |
Mark Miller |
Use the ARCH_NAME rather than ARCH when making stage directories. The only place we don't run check_for_base_arch is system-image, and here we want this to differ because of the kernels.
|
| Fri, 09 Oct 2009 22:42:35 -0500 |
Rob Landley |
Comment tweaks.
|
| Sun, 04 Oct 2009 21:53:36 -0500 |
Rob Landley |
Cosmetic tweaks. (Make title bar changing callable from elsewhere, make run-emulator.sh kill distccd quietly.)
|
| Thu, 17 Sep 2009 04:06:02 -0500 |
Rob Landley |
Factor out and unify binutils, gcc, and ccwrap builds.
|
| Thu, 10 Sep 2009 22:20:58 -0500 |
Rob Landley |
Eliminate a stupid warning that GNU find produces. (Works fine either way, but it's noisy.)
|
| Wed, 02 Sep 2009 23:37:16 -0500 |
Rob Landley |
Rename build/sources to build/packages to reduce confusion (since sources/packages got moved up to just packages, and this contains the extracted contents of that). And use $SOURCES instead of $TOP/sources in a few places.
|
| Wed, 26 Aug 2009 02:37:57 -0500 |
Rob Landley |
Extended setupfor/cleanup to create binary package tarballs if the configure option BINARY_PACKAGE_TARBALLS is set. These tarballs extract into the current directory and add all the changed files installed by this package build, so you can pick and choose when assembling your own filesystem.
|
| Sat, 08 Aug 2009 21:27:08 -0500 |
Rob Landley |
Allow target settings to specify BUILD_STATIC.
|
| Fri, 07 Aug 2009 23:52:55 -0500 |
Rob Landley |
Teach host-tools.sh to create multiple symlinks in fallback directories for ccache and distcc.
|
| Sun, 05 Jul 2009 23:41:01 -0500 |
Rob Landley |
Teach buildall.sh to use new build.sh infrastructure, and replace doforklog with orthogonal maybe_fork and maybe_quiet functions.
|
| Sun, 05 Jul 2009 17:50:44 -0500 |
Rob Landley |
Lots of changes to move buildall.sh functionality into build.sh.
|
| Fri, 03 Jul 2009 05:29:11 -0500 |
Rob Landley |
Add killtree and make stuff use it. Update smoketest-all.sh to use doforklog, allowing FORK=1 to run stuff in parallel.
|
| Thu, 02 Jul 2009 16:23:39 -0500 |
Rob Landley |
Update timestamp on freshly downloaded files so cleanup doesn't delete them.
|
| Thu, 02 Jul 2009 14:12:25 -0500 |
Rob Landley |
Move doforklog to sources/functions.sh.
|
| Wed, 01 Jul 2009 18:53:00 -0500 |
Rob Landley |
Remove wait4background, the shell has a builtin "wait" and we don't care about non-zero wait counts anymore.
|
| Tue, 30 Jun 2009 20:16:59 -0500 |
Rob Landley |
Keep unstable tarballs around even when you do a build that doesn't use 'em.
|
| Tue, 30 Jun 2009 03:05:04 -0500 |
Rob Landley |
Use the git magic tarball comment field to get the version number of unstable git packages for MANIFEST.
|
| Sat, 27 Jun 2009 23:55:55 -0500 |
Rob Landley |
Add option to disable title bar display updates.
|
| Wed, 24 Jun 2009 13:02:03 -0500 |
Rob Landley |
Blank ARCH is a bad signal because host-tools.sh has that, so use a separate EXTRACT_ONLY variable.
|
| Tue, 23 Jun 2009 23:18:19 -0500 |
Rob Landley |
Improve version detection for MANIFEST file. Still doesn't detect version for git archive output because git hasn't got any equivalent of mercurial's .hg_archive.txt file.
|
| Thu, 11 Jun 2009 05:42:51 -0500 |
Rob Landley |
Refactor so include.sh mostly just sets environment variables. Move read_arch_dir to function and call it explicitly (no more need for $NO_ARCH). Make blank_tempdir a function, called explicitly by stages when needed, with some sanity checks. Insert prerequisite tests to later stages so they can detect failure early and provide an explicit erro rmessage, and have those tests happen before blanking $WORK dir, to preserve debugging info. Make buildall.sh depend on prerequisite tests rather than trying to avoid calling later stages (and thus do flow control from asynchronous context). Add FAIL_QUIET option so buildall.sh doesn't spam the log with the new prerequisite error messages.
|
| Mon, 11 May 2009 01:05:52 -0500 |
Rob Landley |
Cosmetic improvement, have === bars show stage name.
|
