Mercurial > hg > aboriginal
graph
-
Add m68k back.Mon, 27 Jun 2011 07:36:56 -0500, by Rob Landley
-
Convert architectures. (Putting m68k back next checking, mercurial got confused.)Mon, 27 Jun 2011 07:36:31 -0500, by Rob Landley
-
Add base_architecture, make base architectures and extra targets work, and move i586 virtio stuff to new i686-kvm target.Mon, 27 Jun 2011 06:40:25 -0500, by Rob Landley
-
Remove one more "settings" dependency from functions.sh, and convert lots of architecture configurations from directory to file.Sun, 26 Jun 2011 20:09:37 -0500, by Rob Landley
-
See if i486 can be converted from directory to file in one go, or if mercurial loses its lunch.Sun, 26 Jun 2011 19:25:19 -0500, by Rob Landley
-
Replace read_arch_dir with load_target, which understands that sources/targets/$TARGET can be a file or a directory.Sun, 26 Jun 2011 17:44:02 -0500, by Rob Landley
-
Add a FAQ about android.Sun, 26 Jun 2011 17:42:52 -0500, by Rob Landley
-
Move i586 to virtioWed, 22 Jun 2011 11:46:10 +0200, by Alessio Igor Bogani
-
Print better error message for bad architecture name, idea from Alessio Igor Bogani.Thu, 23 Jun 2011 07:41:05 -0500, by Rob Landley
-
Try uClibc 0.9.31.1.Wed, 22 Jun 2011 12:53:22 -0500, by Rob Landley
-
Upgrade to dropbear 0.53.1 and fix its' broken static linking.Wed, 22 Jun 2011 12:51:19 -0500, by Rob Landley
-
Make /mnt/init work with more/chroot-splice.sh.Sun, 19 Jun 2011 21:51:42 -0500, by Rob Landley
-
Fix BINARY_PACKAGE_TARBALLS generation: some packages produce no output (zlib used to build dropbear for example), and thus check for an empty list before trying to make a tarball.Fri, 17 Jun 2011 13:00:17 -0500, by Rob Landley
-
Remove FWL debris and rename do_rename to do_manifest while we're at it. (Based on prompting from Alessio Bogani).Fri, 17 Jun 2011 12:42:12 -0500, by Rob Landley
-
Update MANIFEST fileFri, 17 Jun 2011 12:15:34 +0200, by Alessio Igor Bogani
-
Avoid sanitizing useful *_proxy environment variablesFri, 17 Jun 2011 11:26:31 +0200, by Alessio Igor Bogani
-
Remove useless symlinkFri, 17 Jun 2011 11:24:53 +0200, by Alessio Igor Bogani
-
Update linksWed, 15 Jun 2011 23:22:39 +0200, by Alessio Igor Bogani
-
Remove dead linksWed, 15 Jun 2011 23:22:07 +0200, by Alessio Igor Bogani
-
Fix a little typoWed, 15 Jun 2011 23:21:12 +0200, by Alessio Igor Bogani
-
Make ppc440 less wrong. Still need a proper bamboo board setup.Thu, 16 Jun 2011 13:20:43 -0500, by Rob Landley
-
Instead of NTFS, build in v9fs/virtfs.Thu, 16 Jun 2011 13:20:06 -0500, by Rob Landley
-
Check in the release announcement for the web page.Thu, 16 Jun 2011 13:19:35 -0500, by Rob Landley
-
Clean up cronjob.sh (buildall.sh sets host to i686, FORK=1 is server-specific so shouldn't be hardwired in, and pulling from a script that's in the repository you're pulling is just icky.)Thu, 16 Jun 2011 08:36:42 -0500, by Rob Landley
-
Fix from Geoffroy Weisenhorn: on 32-bit hosts mktimeconst needs 1L<<31 to be an _unsigned_ long constant.Thu, 16 Jun 2011 07:41:10 -0500, by Rob Landley
-
Rebuilding root-image should also rebuild linux-kernel for initramfs builds.Wed, 15 Jun 2011 20:11:39 -0500, by Rob Landley
-
Fix broken comment.Wed, 15 Jun 2011 20:10:45 -0500, by Rob Landley
-
Added tag 1.0.2 for changeset a9685aea2a2cTue, 14 Jun 2011 20:48:07 -0500, by Rob Landley
-
Don't require objective C on the host, no matter what weird things ./configure does. 1.0.2Sun, 12 Jun 2011 22:37:01 -0500, by Rob Landley
-
Get sh4 working again thanks to kernel .config and qemu invocation Khem Raj.Sun, 12 Jun 2011 17:17:57 -0500, by Rob Landley
-
Clean up powerpc config.Sun, 12 Jun 2011 03:28:39 -0500, by Rob Landley
-
Convert powerpc miniconfig-linux to baseconfig.Sun, 12 Jun 2011 01:26:17 -0500, by Rob Landley
-
Merge description files into settings files as $DESCRIPTION entry.Sat, 11 Jun 2011 22:43:24 -0500, by Rob Landley
-
Add a FAQ about miniconfigs.Fri, 10 Jun 2011 21:10:37 -0500, by Rob Landley
-
Check in some more project history I wrote. (Nobody should care but me, sort of blog-ish.)Fri, 10 Jun 2011 21:09:30 -0500, by Rob Landley
-
Remove accidentally duplicated news entries.Fri, 10 Jun 2011 21:08:26 -0500, by Rob Landley
-
Add alt-linux patch symlinks so building unstable linux snapshots is more likely to work.Fri, 10 Jun 2011 21:07:18 -0500, by Rob Landley
-
Fix initramfs packaging (never fixed gen_init_cpio.c into sources/toys, best to use the copy out of the Linux source anyway).Fri, 10 Jun 2011 21:05:58 -0500, by Rob Landley
-
Fix armv6l, for details see http://lists.nongnu.org/archive/html/qemu-devel/2011-06/msg00829.htmlTue, 07 Jun 2011 21:56:45 -0500, by Rob Landley
-
Update to busybox 1.18.4 (fixes the wget hang).Sat, 28 May 2011 07:12:44 -0500, by Rob Landley
-
Patch to fix mips malta target on 2.6.39.Sat, 28 May 2011 06:06:38 -0500, by Rob Landley
-
Make bisectinate actually use the LONG=1 test.Tue, 24 May 2011 02:00:52 -0500, by Rob Landley
-
The migrate-kernel script doesn't need to include the initramfs settings in its config. (Facepalm.)Tue, 24 May 2011 02:00:11 -0500, by Rob Landley
-
Upgrade to 2.6.39 kernel.Sun, 22 May 2011 06:09:29 -0500, by Rob Landley
-
Combine set_titlebar and "echo ===" stuff into announce() function. Consistently output target/stage info, and yank redundant instances.Sun, 22 May 2011 04:18:30 -0500, by Rob Landley
-
Update migrate-kernel.sh to work with baseconfigs.Sun, 22 May 2011 04:13:54 -0500, by Rob Landley
-
Cosmetic tweak to miniconfig script.Sat, 21 May 2011 23:38:59 -0500, by Rob Landley
-
Kick uClibc 0.9.32-rc3 to UNSTABLE for the moment, and put 0.9.31 back in stable, with its old patch stack.Sat, 21 May 2011 23:37:31 -0500, by Rob Landley
-
Remove toybox patches, no longer using that in this project.Sat, 21 May 2011 22:56:09 -0500, by Rob Landley
-
Speed up miniconfig by introducing "stride" (discard lines in batches).Wed, 04 May 2011 02:04:17 -0500, by Rob Landley
-
Convert downloads/README into build-stages.htmlMon, 18 Apr 2011 22:51:21 -0500, by Rob Landley
-
Update FAQ now that setup-chroot is in the system images.Mon, 18 Apr 2011 19:34:48 -0500, by Rob Landley
-
Split up system-image.sh into root-image.sh, linux-kernel.sh, and system-image.sh. Rename CROSS_HOST_ARCH to CROSS_COMPILER_HOST.Mon, 18 Apr 2011 18:41:04 -0500, by Rob Landley
-
Example variables should have "export" in front of them so you can just uncomment the line and have it work.Mon, 18 Apr 2011 08:04:46 -0500, by Rob Landley
-
Update to squashfs 4.2.Mon, 18 Apr 2011 08:02:06 -0500, by Rob Landley
-
Change SYSIMAGE_HDA_MEGS default to 2 gigs: it only applies to ext2 and if you're specifying that you probably want some scratch space.Wed, 13 Apr 2011 11:05:47 -0500, by Rob Landley
-
Move do_in_chroot in control-images to setup-choot in system-image, and move zapchroot into system-image as well. New setup-chroot is more flexible, copying whatever existing host mounts you've got and with the ability to re-enter an existing chroot (if the target directory exists it'll just setup and tear down the bind mounts again without copying files).Wed, 13 Apr 2011 03:07:02 -0500, by Rob Landley
-
2.6.38 kernel no longer has config symbol for PACKET_MMAP.Sun, 03 Apr 2011 15:09:19 -0500, by Rob Landley
-
Factor out make-hdb.sh from dev-environment.sh.Sun, 03 Apr 2011 15:05:11 -0500, by Rob Landley
-
More typos from Alan Post.Sun, 03 Apr 2011 15:03:33 -0500, by Rob Landley
-
Many typos, spotted by Alan Post.Tue, 22 Mar 2011 06:51:49 -0500, by Rob Landley
-
Switch to from pthreads.old to NPTL.Fri, 18 Mar 2011 23:20:13 -0500, by Rob Landley
-
Update to linux-2.6.38 and uClibc-0.9.32-rc3.Fri, 18 Mar 2011 23:19:02 -0500, by Rob Landley
-
Remove lots of patches (and add one) for uClibc 0.9.32 release candidates.Fri, 18 Mar 2011 23:16:19 -0500, by Rob Landley
-
Switch to the noperl patches for 2.6.38.Fri, 18 Mar 2011 23:02:13 -0500, by Rob Landley
-
Might as well preserve hard links while assembling root-filsystem. Neither busybox tar nor mksquashfs are currently using them, but maybe someday...Fri, 18 Mar 2011 19:28:50 -0500, by Rob Landley
-
If sha1sum isn't installed, download falls back through all the mirrors repeatedly downloading stuff, without explaining why it failed.Fri, 18 Mar 2011 05:58:35 -0500, by Rob Landley
-
Forgot to check in that last news update. Oops.Mon, 14 Mar 2011 19:07:38 -0500, by Rob Landley
-
Update .hgignoreMon, 14 Mar 2011 19:06:29 -0500, by Rob Landley
-
Fix regression: make #!/bin/sh point to bash instead of busybox shell for dev environment. (Oops.)Mon, 14 Mar 2011 18:46:08 -0500, by Rob Landley
-
impactlinux.com is just an alias for landley.net now, remove it from mirror list.Wed, 09 Feb 2011 21:06:18 -0600, by Rob Landley
-
Update config for uClibc 0.9.32-rc2. Which almost works right.Wed, 09 Feb 2011 21:05:54 -0600, by Rob Landley
-
Update busybox, and update uClibc and linux to test versions that should ship soon. Update patches directory to match.Wed, 09 Feb 2011 20:58:33 -0600, by Rob Landley
-
Albert Lee spotted that libnsl went away after 0.9.11 due to the baseconfig stuff dropping a uClibc symbol. Put it back.Tue, 08 Feb 2011 12:11:04 -0600, by Rob Landley
-
Teach ccwrap to switch off -xc after command line sources listed, so cc doesn't try to interpret libc and such as C sources.Sat, 22 Jan 2011 14:40:00 -0600, by Rob Landley
-
Update news and sidebars.Wed, 09 Feb 2011 21:10:04 -0600, by Rob Landley
-
Bring bootraw patch up to 2.6.37 so it doesn't need fuzz factor support to apply (which busybox patch doesn't do, and which is a bad idea anyway because fuzz has the annoying habit of silently applying hunks in the wrong place and introducing _subtle_ bugs).Mon, 10 Jan 2011 08:26:02 -0600, by Rob Landley
-
Update a couple more links.Sat, 08 Jan 2011 19:58:33 -0600, by Rob Landley
-
Missed a path when I renamed native-build to control-images.Sat, 08 Jan 2011 04:29:00 -0600, by Rob Landley
-
2.6.37 kernel.Fri, 07 Jan 2011 21:21:34 -0600, by Rob Landley
-
Clean up old references to impactlinux.com, add a FAQ explaining why that site went away, and start the long and winding process of redoing documentation.hmtl.Fri, 07 Jan 2011 01:15:01 -0600, by Rob Landley
-
Announce 1.0.1.Mon, 03 Jan 2011 02:08:33 -0600, by Rob Landley
-
Added tag 1.0.1 for changeset a44deb7b4ee0Mon, 03 Jan 2011 02:08:13 -0600, by Rob Landley
-
Busybox 1.18.0 doesn't build on Ubuntu 9.04. This fixes it. 1.0.1Wed, 08 Dec 2010 02:42:07 -0600, by Rob Landley
-
Need -fpic to build a shared libarary.Fri, 03 Dec 2010 21:47:10 -0600, by Rob Landley
-
Update another README.Fri, 03 Dec 2010 21:21:32 -0600, by Rob Landley
-
Update some READMEs.Fri, 03 Dec 2010 21:20:28 -0600, by Rob Landley
-
Fix the includes.Fri, 03 Dec 2010 20:18:50 -0600, by Rob Landley
-
Move clean.sh into more since it isn't a build stage.Fri, 03 Dec 2010 00:09:32 -0600, by Rob Landley
-
Remove debris accidentally checked in.Thu, 02 Dec 2010 21:00:47 -0600, by Rob Landley
-
A nolink build doesn't need the find -L hack.Thu, 02 Dec 2010 20:59:07 -0600, by Rob Landley
-
Backport some uClibc bits so udev will build against 0.9.31.Thu, 02 Dec 2010 20:57:19 -0600, by Rob Landley
-
New busybox release.Thu, 02 Dec 2010 18:17:20 -0600, by Rob Landley
-
Add script.nolink option for packages that really don't like the whole 'tree of symlinks' thing. Migrate vim and remove the -L hack.Wed, 01 Dec 2010 17:57:46 -0600, by Rob Landley
-
Add /sbin to the $PATH in the system image. (Oops.)Wed, 01 Dec 2010 03:03:18 -0600, by Rob Landley
-
Don't delete hdb.img if user specified an $HDB image. (It's caller's responsibility to make sure that the scratch disk is in a usable state.)Wed, 01 Dec 2010 03:02:34 -0600, by Rob Landley
-
Documentation tweak.Sun, 28 Nov 2010 22:09:12 -0600, by Rob Landley
-
Make the module-init-tools build work on a read-only source filesystem.Sun, 28 Nov 2010 22:06:08 -0600, by Rob Landley
-
Killtree momved, update timeout.sh to be able to find it.Tue, 23 Nov 2010 06:43:54 -0600, by Rob Landley
-
Make more of the LFS build actually build.Mon, 22 Nov 2010 17:53:17 -0600, by Rob Landley
-
Handle package tarballs with overlapping names (thingy and thingy-test for example).Mon, 22 Nov 2010 17:32:46 -0600, by Rob Landley
-
Add the sha1sum to the LFS tarball.Mon, 22 Nov 2010 17:31:51 -0600, by Rob Landley
-
Building iproute2 needs the libresolv stub.Mon, 22 Nov 2010 17:31:12 -0600, by Rob Landley
-
Documentation on how to use the bootstrap-skeleton infrastructure.Sun, 21 Nov 2010 19:45:47 -0600, by Rob Landley
-
Move bootstrap-skeleton/files to bootstrap-skeleton/mnt, to be consistent.Sun, 21 Nov 2010 19:08:01 -0600, by Rob Landley
-
Typo, ./configure not /configureSun, 21 Nov 2010 15:02:47 -0600, by Rob Landley
-
Any attempt to actually _use_ the locale stuff fails dereferencing incomplete types because the guts of the headers (where the actual struct contents are defined) get zapped during install by unifdef on _LIBC guards. Rip the unnecessary #ifdefs out. See thread at http://lists.uclibc.org/pipermail/uclibc/2010-July/044185.htmlSun, 21 Nov 2010 14:20:22 -0600, by Rob Landley
-
Unexport ruserpass, a pointless namespace polution that breaks building the ftp program in inetutils.Sun, 21 Nov 2010 14:14:18 -0600, by Rob Landley
-
Log stderr as well as stdout.Sun, 21 Nov 2010 14:02:59 -0600, by Rob Landley
-
If the cross compiler supports internationalization, bash tries to stick -lintl into the host compiler, which may not support it. And if you stick a "no" for the question into config.cache it retests. So stick in a "nyet", which isn't a yes (so -lintl isn't added) but doesn't trigger a retest. I hate autoconf.Sun, 21 Nov 2010 14:02:05 -0600, by Rob Landley
-
Add rather a lot of Linux From Scratch 6.7 building infrastructure. Needs a bit more debugging.Wed, 17 Nov 2010 22:09:19 -0600, by Rob Landley
-
Upgrade to new busybox release and tweak it so /bin/sh is hush, not ash.Sun, 14 Nov 2010 14:45:01 -0600, by Rob Landley
-
Rip out the code gratuitously reordering libraries. It serves no purpose other than to break mixed -lblah and ../blah.a compiles that care about order.Sat, 13 Nov 2010 15:43:47 -0600, by Rob Landley
-
Ever-fluffier FAQ.Thu, 11 Nov 2010 06:37:04 -0600, by Rob Landley
-
Second try at a chroot-splice script, combining a root-filesystem and a control image into a chroot directory. (Useful for working out new control images.)Thu, 11 Nov 2010 06:36:33 -0600, by Rob Landley
-
Move the manifest tracking from build-one-package to run-build-stages and make it actually work.Thu, 11 Nov 2010 04:49:16 -0600, by Rob Landley
-
Move zapchroot to a slightly less inappropriate place.Tue, 09 Nov 2010 20:43:04 -0600, by Rob Landley
-
Mounting a tmpfs on /dev means /dev/pts isn't there, so mkdir it.Mon, 08 Nov 2010 21:07:36 -0600, by Rob Landley
-
Add zapchroot script that unmounts everything under a directory.Mon, 08 Nov 2010 21:06:29 -0600, by Rob Landley
-
Add NFSv3 and devtmpfs to the kernel baseconfig.Mon, 08 Nov 2010 20:57:35 -0600, by Rob Landley
-
Missed a bit of the name change.Sun, 07 Nov 2010 15:57:32 -0600, by Rob Landley
-
Move sources/native-builds to sources/control-images, so the naming is consistent.Sun, 07 Nov 2010 15:55:26 -0600, by Rob Landley
-
When building control images, the working directory should be in build/control-images.Sun, 07 Nov 2010 15:54:37 -0600, by Rob Landley
-
functions.sh no longer includes utility-functions.sh, so adjust includes.Sun, 07 Nov 2010 13:59:42 -0600, by Rob Landley
-
Config tweak to make uClibc work if you install the cross-compiler at /tools and build with CCWRAP_DYNAMIC_LINKER=/tools/lib/ld-uClibc.so.0 exported.Fri, 05 Nov 2010 01:02:34 -0500, by Rob Landley
-
The impactlinux.com domain unexpectedly went away, update the web page onWed, 03 Nov 2010 13:58:56 -0500, by Rob Landley
-
I can't reliably log into freenode anymore due to their strange mandatory authentication protocol being blocked by multiple ISPs, so I'll yank the reference from the web page.Sat, 30 Oct 2010 20:49:09 -0500, by Rob Landley
-
More tweaks to bootstrap-skeleton, implement the first half of lfs-bootstrap for Linux From Scratch 6.7 against the new infrastructure, and tweak gentoo build to stay current with bootstrap-skeleton changes. (Now more common infrastructure, and requires package-list file.)Sun, 24 Oct 2010 04:17:15 -0500, by Rob Landley
-
Fix uClibc so m4 and bison build against it.Sat, 23 Oct 2010 15:15:29 -0500, by Rob Landley
-
Fix guest account.Fri, 22 Oct 2010 18:36:01 -0500, by Rob Landley
-
Provide a mount point for root user's home directory.Fri, 22 Oct 2010 18:31:51 -0500, by Rob Landley
-
Update squashfs and kernel to current versions.Thu, 21 Oct 2010 19:09:51 -0500, by Rob Landley
-
FAQ tweak.Thu, 07 Oct 2010 23:59:05 -0500, by Rob Landley
-
Teach native-build.sh to pass in the name of the build control image.Thu, 07 Oct 2010 23:58:14 -0500, by Rob Landley
-
Teach build-control-images.sh to call the new subdirectory format builds (with integrated patch directories and file trees and such).Thu, 07 Oct 2010 23:55:46 -0500, by Rob Landley
-
Replace bisectinate's built-in tests with a test specified on the command line.Thu, 07 Oct 2010 23:54:33 -0500, by Rob Landley
-
Dropbear's scp shouldn't call /usr/bin/dbclient, it should just call ssh out of $PATH.Thu, 07 Oct 2010 23:53:23 -0500, by Rob Landley
-
Redo gentoo-boostrap on top of bootstrap-skeleton.Thu, 07 Oct 2010 23:52:23 -0500, by Rob Landley
-
Update the common code, use "files" directory instead of build for subdir.Thu, 07 Oct 2010 23:50:12 -0500, by Rob Landley
-
Genericize the noversion() regex a bit, and make sure to only apply patches in the sources/patches directory that end in ".patch".Thu, 07 Oct 2010 23:46:30 -0500, by Rob Landley
-
Add generic native-build infastructure.Tue, 05 Oct 2010 21:18:36 -0500, by Rob Landley
-
Start of a new Linux From Scratch build. Currently just extracts and patches the source tarballs.Mon, 04 Oct 2010 13:59:45 -0500, by Rob Landley
-
Tweak uClibc config to add __progname support and debuggable pthreads.Wed, 29 Sep 2010 15:18:08 -0500, by Rob Landley
-
Break out download_functions.sh into their own file.Sat, 25 Sep 2010 14:10:23 -0500, by Rob Landley
-
Refactor the gentoo bootstrap build some more. Add "build" and "files" subdirectories, split each package build into a separate file, break out reusable shell functions into functions.sh. Flow control now init chrooting into run-build-stages.sh calling the individual package scripts.Sat, 25 Sep 2010 13:40:04 -0500, by Rob Landley
-
Shuffle gentoo bootstrapping into a single directory (with files and patches subdirectories under that).Fri, 24 Sep 2010 08:36:21 -0500, by Rob Landley
-
And e2fsprogs needs "--shared", not just "-shared". I'm not sure playing whack-a-mole with --long -> -long option conversion is the best way for the wrapper to approach this, but until somebody explains the logic of which longopts gcc accepts a single dash for and which it doesn't...Thu, 16 Sep 2010 19:35:32 -0500, by Rob Landley
-
Add "file" to the bootstrap packages, and add a package.provided listing stuff that's there already for portage.Wed, 15 Sep 2010 21:31:16 -0500, by Rob Landley
-
Tighten up test.sh usage message.Wed, 15 Sep 2010 18:06:30 -0500, by Rob Landley
-
Mounting /dev/pts is useful.Wed, 15 Sep 2010 18:06:08 -0500, by Rob Landley
-
Strangely, ncurses won't build shared libraries unless explicitly told to do so on the configure command line. (Yes, it's a library package. No, I don't know what they were smoking either.)Sun, 12 Sep 2010 19:21:42 -0500, by Rob Landley
-
Milton Miller pointed out that tar | tar doesn't need gzip. :)Sun, 12 Sep 2010 18:05:42 -0500, by Rob Landley
-
Typo fix for previous commit.Fri, 10 Sep 2010 12:52:37 -0500, by Rob Landley
-
Fix overlay support: copy to original STAGE_DIR (not into usr/) and use tar | tar instead of cp -a (which barfs copying dir/file to a destination where dir symlink).Fri, 10 Sep 2010 12:21:46 -0500, by Rob Landley
-
The header and news disagreed whether the file was "1.0" or "1.0.0", and since a 1.0.1 is inevitable, rename it 1.0.0.Wed, 08 Sep 2010 12:56:51 -0500, by Rob Landley
-
Update the README for the download directory, noting simple-root-filesystem and the move to the "extras" directory.Tue, 07 Sep 2010 03:48:35 -0500, by Rob Landley
-
1.0 is out, update web page header.Mon, 06 Sep 2010 15:14:02 -0500, by Rob Landley
-
Helps to get the version numbers right in the release message. (It was pendingMon, 06 Sep 2010 00:57:38 -0500, by Rob Landley
-
Added tag 1.0 for changeset 479bcbb2775eSun, 05 Sep 2010 00:47:39 -0500, by Rob Landley
-
Screw it: cut a release and fix it all up later. 1.0Sun, 05 Sep 2010 00:47:04 -0500, by Rob Landley
-
The point of armv4l is to be OABI, so have the config agree with that.Sun, 05 Sep 2010 00:08:47 -0500, by Rob Landley
-
Smoketest was using the wrong run-emulator-from-build.sh path.Sun, 05 Sep 2010 00:04:13 -0500, by Rob Landley
-
Yet more FAQ massaging.Sun, 05 Sep 2010 00:02:21 -0500, by Rob Landley
-
Revert the kernel commit that broke mips64.Sat, 04 Sep 2010 17:55:54 -0500, by Rob Landley
-
When BUILD_STATIC=all that inclues oneit.Wed, 01 Sep 2010 00:58:00 -0500, by Rob Landley
-
Long overdue upgrade to 2.6.35, I'll fix the architectures this breaks later.Tue, 31 Aug 2010 18:25:34 -0500, by Rob Landley
-
Teach gentoo-stage1.sh that /dev/null means don't create an hdc.Tue, 31 Aug 2010 18:22:57 -0500, by Rob Landley
-
Remove toybox.Tue, 24 Aug 2010 03:08:47 -0500, by Rob Landley
-
Remove RW_SYSTEM_IMAGE option. The gentoo-stage1 build shows how to setup a writeable chroot, and the FAQ says how to build a writeable system image. I'm not shipping two different system iamges, then I'd have to explain it and it's not worth the confusion.Tue, 24 Aug 2010 02:53:11 -0500, by Rob Landley
-
Fix mirror list.Mon, 23 Aug 2010 12:30:09 -0500, by Rob Landley
-
Remove patch that current busybox doesn't need.Mon, 23 Aug 2010 12:21:53 -0500, by Rob Landley
-
Fluff out the debugging section of the FAQ a bit more, explaining EXTRACT_ALL and NO_SANITIZE_ENVIRONMENT.Mon, 23 Aug 2010 00:28:41 -0500, by Rob Landley
-
Dereference symlink path segments in record-commands.sh.Mon, 23 Aug 2010 00:27:44 -0500, by Rob Landley
-
Break down and build separate patch package on target for gentoo stage 1.Mon, 23 Aug 2010 00:26:48 -0500, by Rob Landley
-
Building util-linux on target needs the program invocation name stuff.Mon, 23 Aug 2010 00:26:10 -0500, by Rob Landley
-
Add new "/src/host-info" file to target, with CROSS_TARGET and KARCH values.Mon, 23 Aug 2010 00:25:07 -0500, by Rob Landley
-
Update busybox.Mon, 23 Aug 2010 00:22:38 -0500, by Rob Landley
-
Break link (touch gets confused that /mnt is a read-only squashfs).Sat, 21 Aug 2010 02:47:39 -0500, by Rob Landley
-
Switch from toybox netcat to busybox netcat.Sat, 21 Aug 2010 02:46:30 -0500, by Rob Landley
-
Make sure PATH and CONSOLE are properly exported even when kernel command line doesn't provide the right data.Sat, 21 Aug 2010 01:33:02 -0500, by Rob Landley
-
The ncurses ./configure stage won't detect a NO_CPLUSPLUS build. The c++ binding isn't needed to build a gentoo stage 1, so disable it.Fri, 20 Aug 2010 18:42:02 -0500, by Rob Landley
-
Add a fallback if /proc/cmdline doesn't produce a console= entry.Thu, 19 Aug 2010 12:50:32 -0500, by Rob Landley
-
Stab at updating bisectinate to use git clone into build/packages (instead of lots of redundant "git archive | tar x" passes, which pointlessly waste disk and cpu). Still issues around alt-patches and around LONG=1 tests (should be separate "expect" style and hdc control image style test levels).Wed, 18 Aug 2010 17:11:32 -0500, by Rob Landley
-
Script to wrap up a control image and arch root filesystem into a tarball runnable on a host.Wed, 18 Aug 2010 17:07:13 -0500, by Rob Landley
-
Teach build.sh to build host compiler if necessary for CROSS_HOST_ARCH.Wed, 18 Aug 2010 15:58:02 -0500, by Rob Landley
-
If environment sanitizing lets TOOLCHAIN_PREFIX through, it should let HOST_ARCH through too. And while we're at it, separate inherited variables from locally defined ones.Mon, 16 Aug 2010 21:38:33 -0500, by Rob Landley
-
Untangle static vs cross for ccwrap section.Mon, 16 Aug 2010 21:05:18 -0500, by Rob Landley
-
Only make "bash" and "make" and such when toolchain has no prefix.Mon, 16 Aug 2010 21:03:59 -0500, by Rob Landley
-
Missed one (PROGRAM_PREFIX->TOOLCHAIN_PREFIX).Mon, 16 Aug 2010 18:12:16 -0500, by Rob Landley
-
Ahem. Change the user of sources/native-root to sources/root-filesystem.Fri, 13 Aug 2010 17:19:28 -0500, by Rob Landley
-
Move sources/native-root to sources/root-filesystem (mostly to make tab completion work better when navigating the source).Fri, 13 Aug 2010 16:34:07 -0500, by Rob Landley
-
Fix case where build/packages/alt-package exists but tarball doesn't, and EXTRACT_ALL=1 ./download.sh gets called.Fri, 13 Aug 2010 15:41:03 -0500, by Rob Landley
-
In the presence of multiple tarballs, use the newest one, so downloading a new version and extracting it before running cleanup_oldfiles should work now.Tue, 10 Aug 2010 11:40:42 -0500, by Rob Landley
-
Bootstrapping gentoo portage tree. Download tarball, extract it, and emerge --sync. (Build rsync so emerge --sync works.)Tue, 10 Aug 2010 11:00:33 -0500, by Rob Landley
-
Remove script that moved to "more" directory.Tue, 10 Aug 2010 00:17:48 -0500, by Rob Landley
-
Add DEBUG_PACKAGE config variable to build just one package with CPUS=1.Tue, 10 Aug 2010 00:04:30 -0500, by Rob Landley
-
Bite the bullet, I'm no longer really doing toybox development.Tue, 10 Aug 2010 00:03:38 -0500, by Rob Landley
-
Polish the strip logic a bit.Sun, 08 Aug 2010 21:01:41 -0500, by Rob Landley
-
is_in_list doesn't like "[" and "[[", thinks it's an unterminated regex.Sun, 08 Aug 2010 20:57:58 -0500, by Rob Landley
-
If some clever sysadmin claimed 1024-65535 for local ports, punt.Thu, 05 Aug 2010 13:10:07 -0500, by Rob Landley
-
Change how to filter out (currently) unusable busybox apps, and add mke2fs to force e2fsprogs build.Thu, 05 Aug 2010 12:31:01 -0500, by Rob Landley
-
Apparently gentoo has mke2fs in a normal user's path, but not tune2fs. Sigh.Thu, 05 Aug 2010 12:08:25 -0500, by Rob Landley
-
Three convenience scripts to bounce off build/system-image-$ARCH and run stuffThu, 05 Aug 2010 12:08:02 -0500, by Rob Landley
-
build-control-images.sh got broken out a while ago, remove redundant code from buildall.Tue, 03 Aug 2010 11:07:37 -0500, by Rob Landley
-
Write-up on the command logging wrapper.Tue, 03 Aug 2010 11:05:43 -0500, by Rob Landley
-
Teach environment sanitizing to allow STAGE_NAME override.Tue, 03 Aug 2010 11:04:58 -0500, by Rob Landley
-
Use Scrt1.o when building a shared library.Mon, 02 Aug 2010 17:56:28 -0500, by Rob Landley
-
Now that extract_packages is separate from setupfor, EXTRACT_ALL=1 should be less brittle. (If not, needs to be fixed, so remove workarounds.)Sun, 01 Aug 2010 15:20:00 -0500, by Rob Landley
-
Move $BUILD/logs creation from record-commands.sh to include.sh so it gets reliably recreated when a user blanks the logs and re-runs.Sun, 01 Aug 2010 15:19:00 -0500, by Rob Landley
-
Comment tweak.Sun, 01 Aug 2010 15:16:58 -0500, by Rob Landley
-
Add lots of debugging HOWTO information. More to come.Sun, 01 Aug 2010 14:40:48 -0500, by Rob Landley
-
Make extract_package directly callable, and do so where necessary.Sat, 31 Jul 2010 21:49:01 -0500, by Rob Landley
-
Add blank_workdir and make setupfor and cleanup use it. This means you can run an entire build.sh with NO_CLEANUP=1 on.Fri, 30 Jul 2010 13:54:10 -0500, by Rob Landley
-
Apparently this never quite got updated for commit 1116.Tue, 27 Jul 2010 02:35:33 -0500, by Rob Landley
-
List more environment variables sanitizing shouldn't drop.Tue, 27 Jul 2010 01:40:50 -0500, by Rob Landley
-
Bugfix for busybox 1.17.1 mktemp dealing with non-absolute subdirectory paths.Mon, 26 Jul 2010 16:47:41 -0500, by Rob Landley
-
Make the environment sanitize logic slightly more robust in the face of multi-line environment variable values.Mon, 26 Jul 2010 01:42:00 -0500, by Rob Landley
-
Yank toybox from simple-root-filesystem. (Still need it for patch in host-tools.sh)Mon, 26 Jul 2010 00:06:58 -0500, by Rob Landley
-
Update to busybox 1.17.1 and switch to defconfig instead of trimconfig.Mon, 26 Jul 2010 00:05:38 -0500, by Rob Landley
-
Automatically use simple-root-filesystem if root-filesystem isn't avaialble.Sun, 25 Jul 2010 23:26:46 -0500, by Rob Landley
-
Add sanitize_environment to unset unrecognized environment variables.Sun, 25 Jul 2010 23:25:58 -0500, by Rob Landley
-
Add "make" to the default static list, for native-compiler tarball portability. (If you haven't got make working, it's hard to build it.)Sun, 25 Jul 2010 14:29:01 -0500, by Rob Landley
-
Remove a baseconfig symbol that SYSIMAGE_TYPE=initramfs sets itself.Sun, 25 Jul 2010 14:19:12 -0500, by Rob Landley
-
Make BUILD_VERBOSE a little more verbose.Sun, 25 Jul 2010 14:18:25 -0500, by Rob Landley
-
Fluff up comments, and use blank_tempdir so re-running recreates all the images.Sat, 17 Jul 2010 14:19:39 -0500, by Rob Landley
-
Comment tweak for cross-smoke-test.sh.Sat, 17 Jul 2010 13:29:12 -0500, by Rob Landley
-
Only include the dev-environment.sh and native-build.sh scripts when the system image contains native development tools.Mon, 12 Jul 2010 11:40:23 -0500, by Rob Landley
-
Tweak web page header.Sun, 11 Jul 2010 00:04:16 -0500, by Rob Landley
-
Yet more gentoo bootstrap plumbing. Needs target-specific stuff still.Sun, 11 Jul 2010 00:02:44 -0500, by Rob Landley
-
Convert sparc to baseconfig.Sat, 10 Jul 2010 23:41:22 -0500, by Rob Landley
-
Make sh4 less unhappy.Sat, 10 Jul 2010 23:39:36 -0500, by Rob Landley
-
Make NO_CLEANUP work with sources/sections/gcc.shSat, 10 Jul 2010 23:38:51 -0500, by Rob Landley
-
Update initramfs generation to deal with kernel changes, and rip out unnecessary complexity (backgrounding the kernel build, partial rebuild) that other stages don't do.Sat, 10 Jul 2010 23:36:43 -0500, by Rob Landley
-
Fix patching so sha1-for-source.txt only gets updated _after_ patch successfully applies (race with signal delivery), and make dienow output go to stderr instead of stdout.Sat, 10 Jul 2010 00:05:50 -0500, by Rob Landley
-
Output dienow's error message to stderr.Fri, 09 Jul 2010 13:03:01 -0500, by Rob Landley
-
Busybox's current acpid doesn't build on a sles 10 host (SW_LID undeclared).Thu, 08 Jul 2010 10:55:45 -0500, by Rob Landley
-
Honor existing CFLAGS (if any) in binutils build.Tue, 06 Jul 2010 14:46:15 -0500, by Rob Landley
-
Better error message.Tue, 06 Jul 2010 12:10:26 -0500, by Rob Landley
-
Move "sources/more/" to just "more/", add a README explaining why those scripts are there, and adjust calls to them.Mon, 05 Jul 2010 15:37:04 -0500, by Rob Landley
-
Fix mipsel and mips64 after the conversion.Sun, 04 Jul 2010 20:36:50 -0500, by Rob Landley
-
Busybox 1.16.2 is out.Sun, 04 Jul 2010 04:05:58 -0500, by Rob Landley
-
More baseconfig-linux work.Sun, 04 Jul 2010 04:05:47 -0500, by Rob Landley
-
Forgot to check in the baseconfig-linux file. Also, convert the x86 targets and clean up the arm targets.Sat, 03 Jul 2010 23:05:49 -0500, by Rob Landley
-
Add baseconfig-linux, the infrastructure to use it, and move over the arm targets. (You can override with a miniconfig-linux or miniconfig-uClibc in the appropriate target directory.)Fri, 02 Jul 2010 23:38:31 -0500, by Rob Landley
-
Add SIMPLE_ROOT_OVERLAY.Fri, 02 Jul 2010 12:58:41 -0500, by Rob Landley
-
Trim a busybox feature that contains a hardwired #ifdef staircase of known target types. (There's no excuse for that, and it breaks on chips it doesn't know about.)Fri, 02 Jul 2010 12:46:35 -0500, by Rob Landley
-
Yet another patch bug, this one due to @@ -1 +1,3 @@ (because the FSF made ,1 implicit, obviously the file format wouldn't be simple or consistent with them involved...)Wed, 30 Jun 2010 16:01:15 -0500, by Rob Landley
-
Tweak ccwrap.c to handle compiler versions that only provide crtbegin.o and crtend.o without T and S versions.Mon, 28 Jun 2010 21:08:59 -0500, by Rob Landley
-
cronjob didn't include functions.sh so doesn't have maybe_quiet, and the stderr redirect has to go before the pipe to tee anyway.Mon, 28 Jun 2010 00:27:09 -0500, by Rob Landley
-
Better logging for cronjob.Sun, 27 Jun 2010 21:17:51 -0500, by Rob Landley
-
Simplify run-from-build.sh.Sun, 27 Jun 2010 21:17:11 -0500, by Rob Landley
-
Add cross-compiler.sh back. (If you rename a file and add an old one in the same commit, mercurial gets confused. Also, mercurial doesn't consider "this file was deleted" something worth showing in log -v, so figuring out what happened is an exercise in frustration. Obviously deleting a file is not an important part of its history...)Sun, 27 Jun 2010 21:00:55 -0500, by Rob Landley
-
Bug workaround for FORK=1 build-control-images.shSun, 27 Jun 2010 15:22:37 -0500, by Rob Landley
-
New cron job to populate snapshots directory.Sat, 26 Jun 2010 19:39:52 -0500, by Rob Landley
-
Comment out the UNSTABLE= URLs for packages the cron job will be grabbing the git repos for. (It just serves to confuse the error messages I get if I snapshot the git repo wrong.)Sat, 26 Jun 2010 17:02:25 -0500, by Rob Landley
-
Fix a dangling symlink that confuses root-filesystem.sh, and add some comments.Tue, 22 Jun 2010 17:52:27 -0500, by Rob Landley
-
Make static-tools.sh use the same version of zlib as host-tools.sh.Tue, 22 Jun 2010 17:52:00 -0500, by Rob Landley
-
Add HOST_EXTRA. Using it is a horrible idea, please don't.Tue, 22 Jun 2010 17:49:03 -0500, by Rob Landley
-
Oops, a debug bit leaked. Keep it in but make it not fail when HAVE_SHARED=n.Tue, 22 Jun 2010 14:20:26 -0500, by Rob Landley
-
Remember to make the root-filesystem tarball.Tue, 22 Jun 2010 00:58:59 -0500, by Rob Landley
-
Fix typo spotted by Milton Miller.Mon, 21 Jun 2010 10:35:38 -0500, by Rob Landley
-
Migrate oneit out of toybox into sources/toys as a standalone program, and fix it so pid 1 has / as its working directory so we can umount /home if necessary.Sun, 20 Jun 2010 20:32:59 -0500, by Rob Landley
-
Fluff up propaganda page.Sun, 20 Jun 2010 18:44:46 -0500, by Rob Landley
-
Install distcc binaries in the distcc subdirectory, not in /bin.Sun, 20 Jun 2010 16:58:05 -0500, by Rob Landley
-
Add NO_CPLUSPLUS config option, to skip c++ support entirely.Sun, 20 Jun 2010 16:25:35 -0500, by Rob Landley
-
Fix typo.Sun, 20 Jun 2010 14:54:00 -0500, by Rob Landley
-
The install-tools debris this script deletes wasn't there in gcc 3.x, so allow the delete to fail gracefully when USE_UNSTABLE his hooked up to an ancient version.Sat, 19 Jun 2010 16:42:03 -0500, by Rob Landley
-
Older versions of binutils would build break if you _didn't_ build them out of tree (and in the case of 2.14, if you didn't build them in a work directory in the same directory as the binutils source). Not relevant to 2.17, but doesn't hurt anything, so...Sat, 19 Jun 2010 16:39:16 -0500, by Rob Landley
-
Cosmetic cleanup, don't leave unused empty output directories lying around.Sat, 19 Jun 2010 16:37:47 -0500, by Rob Landley
-
Don't use maybe_fork for creating control images yet, extracting the same tarball from multiple stages conflicts.Sat, 19 Jun 2010 16:36:11 -0500, by Rob Landley
-
Scripts generally say thing-thing not thing_thing, so rename migrate_kernel.Fri, 18 Jun 2010 15:48:14 -0500, by Rob Landley
-
Commemorate symbols 0.9.30 needed, for debugging purposes.Wed, 16 Jun 2010 20:49:35 -0500, by Rob Landley
-
Add a title to the main page, and correct the URL since adding a subdomain probably isn't worth the effort.Wed, 16 Jun 2010 18:10:17 -0500, by Rob Landley
-
Fluff up the "about" page a bit.Wed, 16 Jun 2010 18:08:10 -0500, by Rob Landley
-
Update the FAQ with some reasons for the name change.Wed, 16 Jun 2010 18:07:54 -0500, by Rob Landley
-
Leftover debris from buildall.sh breakup (1114).Wed, 16 Jun 2010 08:14:27 -0500, by Rob Landley
-
Use Google's nameserver, use ntpd to set time for chroot (if necessary), don't umount home if we didn't mount it.Wed, 16 Jun 2010 08:13:30 -0500, by Rob Landley
-
Break out simple-root-filesystem.sh and root-filesystem.sh (adding native-compiler.sh output), and use NO_NATIVE_COMPILER to determine which to use. Rename STATIC_CC_HOST to CROSS_HOST_ARCH.Wed, 16 Jun 2010 08:11:51 -0500, by Rob Landley
-
Control image to run the busybox test suite.Wed, 16 Jun 2010 08:03:12 -0500, by Rob Landley
-
Break up buildall.sh so it's easier to run individual portions of it.Sun, 13 Jun 2010 23:50:40 -0500, by Rob Landley
-
More trouble than its worth for FORK and QUIET to be separate knobs.Sun, 13 Jun 2010 22:57:07 -0500, by Rob Landley
-
Update gentoo-stage1 build to actually build portage. (Doesn't install a tree yet.)Sun, 13 Jun 2010 22:55:53 -0500, by Rob Landley
-
Vary $WORK directory so making multiple control images in parallel with FORK=1 doesn't conflict.Sun, 13 Jun 2010 22:54:25 -0500, by Rob Landley
-
Make smoketest.sh more efficient, no need to create hdb.img or use run-from-build.sh.Sun, 13 Jun 2010 02:47:49 -0500, by Rob Landley
-
Michael S. Zick wrote up some mips documentation for the architectures page.Fri, 11 Jun 2010 14:00:11 -0500, by Rob Landley
-
Tweak: some things install their man pages into /usr/man, and some into /usr/share/man. Symlink 'em together so there's just the one.Thu, 10 Jun 2010 21:17:07 -0500, by Rob Landley
-
Cosmetic tweak, say "Extracting" instead of "Building" during EXTRACT_ALL.Thu, 10 Jun 2010 21:16:14 -0500, by Rob Landley
-
Last tweak to this file introduced a bug looping endlessly, failing to proceed past the separator. Oops.Wed, 09 Jun 2010 11:16:17 -0500, by Rob Landley
-
Another fix for unexported $PATH.Tue, 08 Jun 2010 18:42:22 -0500, by Rob Landley
-
Check for null $PATH after checking for dir/filename (which doesn't need $PATH).Tue, 08 Jun 2010 15:01:39 -0500, by Rob Landley
-
Update buildall for native-build.sh moving into system-image.Tue, 08 Jun 2010 01:39:07 -0500, by Rob Landley
-
Suppress error messages from manfiest generation.Tue, 08 Jun 2010 01:37:51 -0500, by Rob Landley
-
The work directory gets blanked each time so it's still not SMP safe, use $STAGE_DIR for the static probe instead.Sun, 06 Jun 2010 22:51:48 -0500, by Rob Landley
-
Need to build a separate "hello" for each process, or buildall.sh dies with conflicts.Sun, 06 Jun 2010 12:01:23 -0500, by Rob Landley
-
Blank $STAGE_DIR before adjusting $PATH so building the cross-compiler stage doesn't get confused if it dies during the uClibc++ build and gets re-run (adjusting the path to point to the cross compiler we're about to delete and rebuild). Make NO_CLEANUP explicit in system-image.sh so it can rebuild zImage and squashfs independently by default.Sat, 05 Jun 2010 00:10:12 -0500, by Rob Landley
-
Add ALLOW_PATCH_FAILURE config switch to continue despite failed patches.Sat, 05 Jun 2010 00:08:28 -0500, by Rob Landley
-
Patch from Khem Raj to fix mips64 dynamic linking.Wed, 02 Jun 2010 21:09:11 -0500, by Rob Landley
-
Make big endian arm unhappy in a _different_ way.Sun, 30 May 2010 12:18:24 -0500, by Rob Landley
-
Redo download logic to work with FORK=1 (spotted by Milton Miller).Fri, 28 May 2010 00:50:44 -0500, by Rob Landley
-
Move wait into cleanup_oldfiles.Fri, 28 May 2010 00:44:32 -0500, by Rob Landley
-
Test for static linking capability on the host, and complain if we need it but it isn't there.Tue, 25 May 2010 10:09:49 -0500, by Rob Landley
-
Update BUILD_STATIC value for new syntax.Sun, 23 May 2010 00:11:05 -0500, by Rob Landley
-
Correct name of timeout script.Sun, 23 May 2010 00:10:45 -0500, by Rob Landley
-
Cleanup "FROM_ARCH" mess. Rename FROM_ARCH->HOST_ARCH, make stage script responsible for setting HOST_ARCH (not includes.sh). Also, remove HOST_UTILS variable, only build uClibc utils for non-simple compilers and bypass uClibc's (weird) makefile for the utils directory.Fri, 21 May 2010 22:26:25 -0500, by Rob Landley
-
Make test.sh able to use/print environment variables from the proper context.Fri, 21 May 2010 22:25:10 -0500, by Rob Landley
-
Yeah, I need to do another toybox release for yet another patch bug...Fri, 21 May 2010 21:50:40 -0500, by Rob Landley
-
Fix 64 bit targets with uClibc 0.9.31.Fri, 21 May 2010 21:27:34 -0500, by Rob Landley
-
Test script to run individual build_stage invocations and such with include.sh and read_arch_dir loaded. Usage: STAGE_NAME=simple-cross-compiler sources/more/test.sh sparc build_stage uClibcSun, 16 May 2010 20:08:51 -0500, by Rob Landley
-
Build ccwrap static unless BUILD_STATIC=none or we're doing the simple cross compiler.Sun, 16 May 2010 18:36:07 -0500, by Rob Landley
-
Don't build anything statically in host-tools.sh, glibc is broken.Sun, 16 May 2010 18:25:39 -0500, by Rob Landley
-
Make BUILD_STATIC take comma separated list of packages, or "all" or "none". Default behavior should remain the same.Sun, 16 May 2010 02:26:03 -0500, by Rob Landley
-
Convert unstable() to is_in_list() taking the list to check as the second argument.Sat, 15 May 2010 12:41:14 -0500, by Rob Landley
-
Remove unnecessary "function" label from shell functions.Sat, 15 May 2010 12:12:39 -0500, by Rob Landley
-
More work on gentoo from scratch conversion.Fri, 14 May 2010 04:51:52 -0500, by Rob Landley
-
Fix alt-gcc build and remove alt-patches for gcc and binutils.Fri, 14 May 2010 04:26:34 -0500, by Rob Landley
-
Use toybox for a temporary workaround for busybox regression.Fri, 14 May 2010 04:19:58 -0500, by Rob Landley
-
New zlib release, and fix fallback mirror since new domain names aren't quite working yet.Fri, 14 May 2010 04:18:46 -0500, by Rob Landley
-
Don't set --build and --host for simple-cross binutils build.Fri, 14 May 2010 04:13:31 -0500, by Rob Landley
-
Teach hello world native build to honor $FTP_SERVERFri, 14 May 2010 01:57:22 -0500, by Rob Landley
-
Show squashfs progress indicator when not in FORK mode.Fri, 14 May 2010 01:56:15 -0500, by Rob Landley
-
Teach static-tools.sh to look in its own patch directory.Fri, 14 May 2010 01:34:59 -0500, by Rob Landley
-
Add native-build.sh to system-image (it takes only one argument now, the build control system image file). Make system-image.sh script processing understand an INCLUDE syntax to insert unique-port, and trim the unique-port comment to something less distracting.Fri, 14 May 2010 01:28:02 -0500, by Rob Landley
-
Overwrite dev-environment.sh, don't append. (Now that it's got rebuild support, running it twice doesn't delete system-image dir between runs.)Sat, 08 May 2010 01:01:24 -0500, by Rob Landley
-
Don't overwrite existing files when collating root filesystem and native compiler. (It lobomizes busybox due to "strings" and such.)Sat, 08 May 2010 01:00:01 -0500, by Rob Landley
-
Take RW system image out of buildall.sh default. Distributing two types of prebuilt system images would be more confusing than helpful, and the gentoo-stage1.sh script provides an example showing how to copy the root filesystem into a writeable chroot.Thu, 06 May 2010 00:06:30 -0500, by Rob Landley
-
Try again: extract native compiler into usr, not into /.Thu, 06 May 2010 00:04:27 -0500, by Rob Landley
-
Minor cleanup, collate the === announce lines.Wed, 05 May 2010 22:57:05 -0500, by Rob Landley
-
Bugfix: don't cleanup kernel if we skipped setupfor.Wed, 05 May 2010 22:28:47 -0500, by Rob Landley
-
Save the uClibc and linux .config files in the native toolchain, and install them with the rest of the native toolchain. Don't bother extracting and configuring the kernel if we don't need to.Wed, 05 May 2010 22:27:14 -0500, by Rob Landley
-
Install native compiler into the right directory.Wed, 05 May 2010 22:15:58 -0500, by Rob Landley
-
More updates to README files.Wed, 05 May 2010 22:15:24 -0500, by Rob Landley
-
Comment/documentation updates.Wed, 05 May 2010 21:13:04 -0500, by Rob Landley
-
Sigh. Put mklfs.sh in the right directory.Wed, 05 May 2010 20:09:31 -0500, by Rob Landley
-
Safety catch until the script is converted.Tue, 04 May 2010 22:12:15 -0500, by Rob Landley
-
The mklfs script should be turned into an hdc build.Tue, 04 May 2010 22:11:34 -0500, by Rob Landley
-
First chunk of porting Gentoo From Scratch to an hdc build. (Much more to go.)Tue, 04 May 2010 01:54:12 -0500, by Rob Landley
-
Only rebuild kernel when we need to.Tue, 04 May 2010 00:49:14 -0500, by Rob Landley
-
Delete the right temp file, and don't set ARCH when HOST already has the right value.Tue, 04 May 2010 00:48:08 -0500, by Rob Landley
-
Updates to init.sh: only mount tmpfs on /home if / isn't writeable, and use /proc/cmdline instead of grepping dmesg to get console info.Mon, 03 May 2010 09:08:27 -0500, by Rob Landley
-
Kernel config for aranym m68k emlator, from Charles Stevens.Mon, 03 May 2010 09:06:32 -0500, by Rob Landley
-
Update hello world example native build.Mon, 03 May 2010 09:05:35 -0500, by Rob Landley
-
Update mirror list for new subdomain names.Mon, 03 May 2010 09:04:47 -0500, by Rob Landley
-
Update lots and lots of web pages for the project name change to Aboriginal Linux.Sun, 02 May 2010 17:15:06 -0500, by Rob Landley
-
Add a symlink to the www/README file from the top level.Sun, 02 May 2010 16:16:51 -0500, by Rob Landley
-
Move README into the www directory, where it can be linked from the the website.Sun, 02 May 2010 16:16:11 -0500, by Rob Landley
-
Significant rewrite of README, more complete, up to date, and using the new name "Aboriginal Linux" for the project.Sun, 02 May 2010 16:15:08 -0500, by Rob Landley
-
More documentation for miniconfig.sh.Sat, 01 May 2010 14:15:53 -0500, by Rob Landley
-
Add BUILD_RW_SYSTEM_IMAGE=1 config option to build 2 gig writeable HDA (new stage named rw-system-image-$ARCH).Sat, 01 May 2010 01:00:26 -0500, by Rob Landley
-
Fix one more place timeout.sh moved.Sat, 01 May 2010 00:58:02 -0500, by Rob Landley
-
Reduce native-build.sh reliance on run-from-build.sh.Sat, 01 May 2010 00:56:44 -0500, by Rob Landley
-
Fix the workaround for Ubuntu's newly overcomplicated host toolchain to put the new symlink in the right directory.Fri, 30 Apr 2010 09:07:36 -0500, by Rob Landley
-
Serious upgrade of the "What is?" section.Wed, 07 Apr 2010 20:08:39 -0400, by Eric S. Raymond
-
Cleanup debris files installed by the kernel's headers install, spotted by Denys Vlasenko.Sun, 25 Apr 2010 20:25:40 -0500, by Rob Landley
-
Update native prompt to show amount of parallelism a build can get (indicating whether distcc is enabled).Tue, 13 Apr 2010 12:58:42 -0500, by Rob Landley
-
Update to uClibc 0.9.31.Mon, 12 Apr 2010 00:11:10 -0500, by Rob Landley
-
Yank ugly STAGE_DIR adjustment and instead teach busybox/toybox bilds to auto-detect "bin" directory on install. (And while we're at it, don't build hello-dynamic on static-only system.)Mon, 12 Apr 2010 00:04:11 -0500, by Rob Landley
-
NO_CLEANUP should prevent blank_tempdir from deleting stuff.Mon, 12 Apr 2010 00:02:32 -0500, by Rob Landley
-
Move make, bash, and distcc builds into native-compiler.sh. (Break 'em out into sources/sections/*.build.)Sun, 11 Apr 2010 15:21:00 -0500, by Rob Landley
-
Delete empty build/temp-* directories when we're done with them.Thu, 08 Apr 2010 23:09:13 -0500, by Rob Landley
-
Emphasis on virtualization.Wed, 07 Apr 2010 18:49:30 -0400, by Eric S. Raymond
-
Use "custom virtual machines".Wed, 07 Apr 2010 18:26:01 -0400, by Eric S. Raymond
-
Add a new FAQ: how to get a writeable root filesystem.Wed, 07 Apr 2010 16:39:41 -0500, by Rob Landley
-
Tweak to remove target list from the page (so it can't bit rot), and add an executive summary.Wed, 07 Apr 2010 15:50:03 -0500, by Rob Landley
-
Jean-Christophe Dubois pointed out that if build.sh doesn't source config, it doesn't get things like NO_NATIVE_COMPILER.Mon, 05 Apr 2010 18:39:09 -0500, by Rob Landley
-
Milton Miller spotted a bug where PATH was being set twice, and thus wasn't including both potential compiler locations at once.Mon, 05 Apr 2010 02:06:00 -0500, by Rob Landley
-
Charles Stevens hit another "busybox flash doesn't build on Ubuntu 8.x" bug, this time because busybox grew a flashcp we weren't switching off yet.Sun, 04 Apr 2010 05:48:50 -0500, by Rob Landley
-
Add zlib support to static-tools.sh so dropbear supports -C. Build dropbear -Os and strip the binaries to try to get some of the resulting size increase back.Thu, 01 Apr 2010 15:59:15 -0500, by Rob Landley
-
Build zlib for squashfs, so we don't depend on the host having it.Thu, 01 Apr 2010 02:39:54 -0500, by Rob Landley
-
Added tag 0.9.11 for changeset b9319aa31df8Mon, 29 Mar 2010 19:02:55 -0500, by Rob Landley
-
Announce 0.9.11 release.Mon, 29 Mar 2010 19:00:34 -0500, by Rob Landley
-
Link to mirror sites from each other.Mon, 29 Mar 2010 08:17:24 -0500, by Rob Landley
-
Always make mke2fs, run-from-build.sh can't make hdb.img otherwise. 0.9.11Mon, 29 Mar 2010 07:48:57 -0500, by Rob Landley
-
Busybox 1.16.1 is out.Mon, 29 Mar 2010 00:52:19 -0500, by Rob Landley
-
Upgrade to uClibc 0.9.30.3.Sun, 28 Mar 2010 15:12:23 -0500, by Rob Landley
-
Call the static native binaries $PACKAGE-$ARCH instead of the other way around, both for consistency with the tarball names and because the busybox multiplexor only knows about postfixes (so it can work as "./busybox-i686 ls -l" but "./i686-busybox ls -l" will say unknown applet).Sun, 28 Mar 2010 13:48:48 -0500, by Rob Landley
-
Fix the sparc build of strace.Sun, 28 Mar 2010 13:44:20 -0500, by Rob Landley
-
Factor out the upload into a shell function, and upload each package's results as available, rather than waiting until the end to upload everything at once.Sat, 27 Mar 2010 20:31:21 -0500, by Rob Landley
-
When USE_TOYBOX=1, don't try to truncate and append to a file that's in use. (Bug spotted by David Seikel.)Sat, 27 Mar 2010 20:26:58 -0500, by Rob Landley
-
Tell buildall where the hdc generation script for the native build actually went.Fri, 26 Mar 2010 22:00:51 -0500, by Rob Landley
-
Bugfix by David Seikel: don't append .tar.bz2 twice to BINARY_PACKAGE_TARBALLS.Fri, 26 Mar 2010 13:02:14 -0500, by Rob Landley
-
Bug spotted by Milton Miller: create stage tarball _after_ the compile smoketest.Fri, 26 Mar 2010 12:58:50 -0500, by Rob Landley
-
Allow existing extracted source directry to be patched if necessary, even if tarball doesn't exist. (This lets a git bisect happen in situ under build/packages.)Fri, 26 Mar 2010 04:57:11 -0500, by Rob Landley
-
Move sources/more/setup-native-build.sh to sources/native-builds/static-tools.sh, and add native-builds/hello-world.sh while I'm at it.Fri, 26 Mar 2010 00:52:05 -0500, by Rob Landley
-
Move sources/native to sources/native-rootThu, 25 Mar 2010 23:30:20 -0500, by Rob Landley
-
Move CROSS_SMOKE_TEST implementation out of simple-cross-compiler.sh and into sources/more/cross-smoke-test.sh, called from build.sh. Clean up comments a bit while we're there.Thu, 25 Mar 2010 18:54:30 -0500, by Rob Landley
-
Minor news tweak I made ages ago and forgot to check in.Thu, 25 Mar 2010 15:19:10 -0500, by Rob Landley
-
Make run-emulator.sh executable.Thu, 25 Mar 2010 03:10:32 -0500, by Rob Landley
-
New i486 target, by David Seikel. (He's working on a Vortex86DX SOC, see http://www.vortex86dx.com/ and http://www.icoptech.com/pddetail.aspx?id=129&pid=4 for details.)Sun, 21 Mar 2010 23:53:15 -0500, by Rob Landley
-
Make the native build timeout configurable.Thu, 18 Mar 2010 05:44:47 -0500, by Rob Landley
-
Get screenshots working again. (Conversion to Vladimir Dronnikov's new layout underway, just going slowly...)Thu, 18 Mar 2010 02:25:11 -0500, by Rob Landley
-
Comment tweak.Thu, 18 Mar 2010 02:20:23 -0500, by Rob Landley
-
Finish previous commit: fix HDB and HDC and make run_emulator() a function. (And finally, if you say DEBUG=1 you get the emulator command output! Yay!)Tue, 16 Mar 2010 03:58:43 -0500, by Rob Landley
-
Move distcc setup to dev-environment.sh. Fix bug where CPUS wasn't defined if distcc wasn't being used (leading to make -j with no limit, and OOM conditions in the emulated system).Mon, 15 Mar 2010 06:01:36 -0500, by Rob Landley
-
Another bug Wolfgang Denk reported: make BUILD_STATIC=none actually work.Sun, 14 Mar 2010 01:18:27 -0600, by Rob Landley
-
Slightly tweaked bugfix from Wolfgang Denk: clean out environment variables from the host that would screw up the build.Fri, 12 Mar 2010 14:29:25 -0600, by Rob Landley
-
Fix busybox so the 2.6.33 mips kernel builds.Fri, 12 Mar 2010 02:52:58 -0600, by Rob Landley
-
Optimize the linux and busybox bisects to not rebuild earlier sections unnecessarily.Sun, 07 Mar 2010 13:18:58 -0600, by Rob Landley
-
Fix a typo that broke the script completely.Sun, 07 Mar 2010 11:49:25 -0600, by Rob Landley
-
Missed a patch that needed updating for 2.6.33 kernel.Mon, 01 Mar 2010 22:56:57 -0600, by Rob Landley
-
Upgrade to 2.6.33 kernel.Mon, 01 Mar 2010 22:07:03 -0600, by Rob Landley
-
Add 64-bit mips target.Mon, 01 Mar 2010 02:43:27 -0600, by Rob Landley
-
Add FORK=1 support to download.sh, and work around bash's $$ refusing to give an actual unique $PID for subshells by groveling around in /proc to find something usable.Mon, 01 Mar 2010 02:21:49 -0600, by Rob Landley
-
Make extract use unique temporary directories so it's parallelizable.Mon, 01 Mar 2010 01:03:04 -0600, by Rob Landley
-
Rename SKIP_STAGE_TARBALLS to NO_STAGE_TARBALLS (for consistency), and make system-image.sh use it instead of doing it by hand.Wed, 24 Feb 2010 10:31:10 -0600, by Rob Landley
-
Don't need to blank STAGE_DIR when read_arch_dir already does.Wed, 24 Feb 2010 10:17:43 -0600, by Rob Landley
-
Give bisectinate.sh overrideable SRCDIR and BUILD.Wed, 24 Feb 2010 10:13:36 -0600, by Rob Landley
-
Add more cleanup to bisectinate's repository initialization (reliability tweak).Wed, 24 Feb 2010 10:11:02 -0600, by Rob Landley
-
Add export_if_blank and make lots of build paths overrideable.Wed, 24 Feb 2010 10:08:38 -0600, by Rob Landley
-
Typo fix.Sun, 21 Feb 2010 17:07:55 -0600, by Rob Landley
-
FIX SPARC! (Woot!)Sun, 21 Feb 2010 12:04:06 -0600, by Rob Landley
-
Cleanups and comments.Sun, 21 Feb 2010 12:03:28 -0600, by Rob Landley
-
Idea from Johnicholas Hines: add a three second "read" before running hdc's init so the user can press a key to get a command shell instead.Tue, 16 Feb 2010 08:26:35 -0600, by Rob Landley
-
Tweak mercurial repo entry and add link to current snapshot.Tue, 16 Feb 2010 06:57:14 -0600, by Rob Landley
-
Make qemu-system-powerpc work with more than 2 disks.Sun, 14 Feb 2010 01:42:18 -0600, by Rob Landley
-
Comment tweak.Sat, 06 Feb 2010 17:57:15 -0600, by Rob Landley
-
The kconfig "make defconfig" will occasionally prompt the user for stuff. (*boggle*) Workaround.Sat, 06 Feb 2010 01:38:09 -0600, by Rob Landley
-
Cosmetic: make mke2fs much less verbose.Sat, 06 Feb 2010 01:01:09 -0600, by Rob Landley
-
Oops. Wait for native build to finish before exiting.Sat, 06 Feb 2010 01:00:46 -0600, by Rob Landley
-
Allow patchdir to be overridden.Fri, 05 Feb 2010 17:47:59 -0600, by Rob Landley
-
Genericize native build.Fri, 05 Feb 2010 10:33:06 -0600, by Rob Landley
-
Fix new version of strace to build with 2.6.32 kernel headers.Fri, 05 Feb 2010 07:11:11 -0600, by Rob Landley
-
Switch to the fix that went upstream.Thu, 04 Feb 2010 20:59:45 -0600, by Rob Landley
-
Announce 0.9.10 release.Tue, 02 Feb 2010 23:26:34 -0600, by Rob Landley
-
Added tag 0.9.10 for changeset 19660e12c1deTue, 02 Feb 2010 23:24:14 -0600, by Rob Landley
-
No reason for about.html to be version-specific. 0.9.10Tue, 02 Feb 2010 21:53:02 -0600, by Rob Landley
-
Update READMEs.Tue, 02 Feb 2010 21:24:32 -0600, by Rob Landley
-
Fix thinko in download_from.Tue, 02 Feb 2010 19:37:11 -0600, by Rob Landley
-
Make root filesystem's usr/src has config-linux and config-uClibc as well as config-busybox.Tue, 02 Feb 2010 04:46:07 -0600, by Rob Landley
-
Fix sparc build break caused by uClibc upgrade.Tue, 02 Feb 2010 02:52:13 -0600, by Rob Landley
-
More code cleanups (rename try_checksum to confirm_checksum).Thu, 28 Jan 2010 13:58:18 -0600, by Rob Landley
-
Set the executable bit on bisectinate.Mon, 25 Jan 2010 11:05:31 -0600, by Rob Landley
-
Rename try_download() to download_from().Sun, 24 Jan 2010 01:19:54 -0600, by Rob Landley
-
Revert patch that breaks sh4 target in 2.6.32 kernel.Sat, 23 Jan 2010 06:16:59 -0600, by Rob Landley
-
Script to track down breakage in a USE_UNSTABLE package via git bisect.Thu, 21 Jan 2010 19:19:50 -0600, by Rob Landley
-
Revert a patch that broke mips in uClibc 0.9.30.2.Thu, 21 Jan 2010 15:16:39 -0600, by Rob Landley
-
Update uClibc to 0.9.30.2. (Breaks mips, tracking that down now.)Tue, 19 Jan 2010 19:29:51 -0600, by Rob Landley
-
Build the static native binaries for all targets, not just the last one. (Thinko.)Tue, 19 Jan 2010 19:27:39 -0600, by Rob Landley
-
Update strace to current version.Sun, 17 Jan 2010 17:26:12 -0600, by Rob Landley
-
Improved zilog serial fix from the ppc guys.Thu, 14 Jan 2010 23:45:14 -0600, by Rob Landley
-
The 2.6.32 kernel headers broke the strace build, this fixes it.Tue, 12 Jan 2010 21:58:11 -0600, by Rob Landley
-
Redo library sequencing, add -lgcc before -gcc_s (because that's what gcc expects).Wed, 06 Jan 2010 21:36:38 -0600, by Rob Landley
-
Fall back to libgcc.a and libgcc_eh.a if two passes of libgcc_s.so didn't resolve the symbols we need.Wed, 06 Jan 2010 06:27:05 -0600, by Rob Landley
-
Helps to actually remember to add the new file.Sun, 03 Jan 2010 22:34:06 -0600, by Rob Landley
-
Fix buildall.sh to use the new script name.Sun, 03 Jan 2010 19:50:07 -0600, by Rob Landley
-
Largeish refactoring and cleanup of compiler build:Sun, 03 Jan 2010 17:04:39 -0600, by Rob Landley
-
Remove the old GIMME_AN_S logic, instead make ccwrap autodetect presence of libgcc_s.so. Also fix a typo causing a nasty bug with the two dash version of --static.Sun, 03 Jan 2010 05:04:35 -0600, by Rob Landley
-
Oops, local changes I didn't mean to check in leaked. Fix it.Tue, 22 Dec 2009 12:14:03 -0600, by Rob Landley
-
Minor cleanups and comments, introduce check_prerequisite function.Tue, 22 Dec 2009 11:51:52 -0600, by Rob Landley
-
Actually remove functions that got moved to utility_functions.sh.Sun, 20 Dec 2009 19:56:21 -0600, by Rob Landley
-
Once again add /sbin:/usr/sbin to $PATH when mke2fs isn't in $PATH.Sun, 20 Dec 2009 00:32:17 -0600, by Rob Landley
-
Teach build_section to run "*.build" sections (with setupfor/cleanup called for them) as well as "*.sh" sections which do their own setup/cleanup.Sat, 19 Dec 2009 00:51:16 -0600, by Rob Landley
-
Largeish cleanup of ccwrap.c. Remove lots of uclibc-isms, put rawcc in tools/bin.Fri, 18 Dec 2009 03:38:21 -0600, by Rob Landley
-
Cosmetic tweak, have build_section spit out a === line with the sources/sections it's running.Fri, 18 Dec 2009 03:36:12 -0600, by Rob Landley
-
Silence compiler warnings: unused variable ?ignore?Fri, 11 Dec 2009 22:34:39 +0100, by Marc Andre Tanner
-
Update version numbers (oops).Wed, 16 Dec 2009 15:22:21 -0600, by Rob Landley
-
Edge case in perl removal patch. Probably irrelevant, but match old perl script's output anyway.Sun, 13 Dec 2009 00:13:44 -0600, by Rob Landley
-
Have host-tools.sh only make e2fs or squashfs tools if we need them.Sun, 13 Dec 2009 00:13:09 -0600, by Rob Landley
-
Remove UCLIBC_GCC_{INC,LIB}Fri, 11 Dec 2009 22:29:06 +0100, by Marc Andre Tanner
-
Script to caclulate unstable linux miniconfig from stable linux miniconfig, using make oldconfig.Fri, 11 Dec 2009 00:21:46 -0600, by Rob Landley
-
New CONFIG_MMU entry showed up for arm, needs to be enabled in 2.6.32.Thu, 10 Dec 2009 03:34:22 -0600, by Rob Landley
-
Update downloads/binaries/READMETue, 08 Dec 2009 20:22:53 -0600, by Rob Landley
-
Announce release 0.9.9.Tue, 08 Dec 2009 18:12:16 -0600, by Rob Landley
-
Added tag 0.9.9 for changeset d7485ceb119fTue, 08 Dec 2009 18:10:50 -0600, by Rob Landley
-
Remove leftover debris from mysetsid->killtree switch.Tue, 08 Dec 2009 17:59:09 -0600, by Rob Landley
-
Comment typo spotted by Joe Perches.Tue, 08 Dec 2009 17:09:51 -0600, by Rob Landley