>> ============================================================= >> OpenBIOS 1.1 [May 5 2013 09:21] >> Configuration device id QEMU version 1 machine id 2 >> CPUs: 1 >> Memory: 128M >> UUID: 00000000-0000-0000-0000-000000000000 >> CPU type PowerPC,750 Welcome to OpenBIOS v1.1 built on May 5 2013 09:21 >> [ppc] Kernel already loaded (0x01000000 + 0x00364080) (initrd 0x00000000 + 0x00000000) >> [ppc] Kernel command line: root=/dev/hda rw init=/sbin/init.sh panic=1 PATH=/bin:/sbin console=ttyS0 HOST=powerpc OF stdout device is: /pci@80000000/mac-io@3/escc@13000/ch-b@13000 Preparing to boot Linux version 3.10.0 (landley@driftwood) (gcc version 4.2.1) #1 Wed Jul 3 00:53:23 CDT 2013 Detected machine type: 00000400 command line: memory layout at init: memory_limit : 00000000 (16 MB aligned) alloc_bottom : 01369000 alloc_top : 08000000 alloc_top_hi : 08000000 rmo_top : 08000000 ram_top : 08000000 found display : /pci@80000000/QEMU,VGA@1, opening... done copying OF device tree... Building dt strings... Building dt structure... Device tree strings 0x0136a000 -> 0x0136a4d5 Device tree struct 0x0136b000 -> 0x0136d000 Calling quiesce... returning from prom_init console [ttyS0] enabled, bootconsole disabled pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 devtmpfs: initialized NET: Registered protocol family 16 PCI: Probing PCI hardware PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x7fffff] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfdffffff] (bus address [0x00000000-0x00ffffff]) pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff] pci_bus 0000:00: root bus resource [bus 00-ff] bio: create slab at 0 vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:01.0 SCSI subsystem initialized Switching to clocksource timebase NET: Registered protocol family 2 TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP: reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 squashfs: version 4.0 (2009/01/31) Phillip Lougher 9p: Installing v9fs 9p2000 file system support msgmni has been set to 246 io scheduler noop registered (default) pmac_zilog: 0.6 (Benjamin Herrenschmidt ) loop: module loaded MacIO PCI driver attached to Heathrow chipset 0.00013020:ch-a: ttyS0 at MMIO 0x81093020 (irq = 16) is a Z85c30 ESCC - Serial port 0.00013000:ch-b: ttyS1 at MMIO 0x81093000 (irq = 17) is a Z85c30 ESCC - Serial port Macintosh CUDA driver v0.5 for Unified ADB. Uniform Multi-Platform E-IDE driver adb: starting probe task... adb: finished probe task... ide-pmac: Found Apple Heathrow ATA controller (macio), bus ID 0, irq 19 hda: QEMU HARDDISK, ATA DISK drive hda: MWDMA2 mode selected ide0 at 0xc900c000-0xc900c070,0xc900c160 on irq 19 cmd64x 0000:00:04.0: IDE controller (0x1095:0x0646 rev 0x07) cmd64x 0000:00:04.0: IDE port disabled cmd64x 0000:00:04.0: 100% native mode on irq 21 ide1: BM-DMA at 0x0700-0x0707 hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive hdc: UDMA/33 mode selected ide1 at 0x500-0x507,0x582 on irq 21 (serialized) ide-gd driver 1.18 hda: max request size: 512KiB hda: 62168 sectors (31 MB) w/256KiB Cache, CHS=61/255/63 hda: cache flushes supported hda: unknown partition table ide-cd driver 5.00 ide-cd: hdc: ATAPI 4X DVD-ROM drive, 512kB Cache cdrom: Uniform CD-ROM driver Revision: 3.20 ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker eth0: RealTek RTL-8029 found at 0x400, IRQ 23, 52:54:00:12:34:56. mousedev: PS/2 mouse device common for all mice TCP: cubic registered NET: Registered protocol family 17 9pnet: Installing 9P2000 support drivers/rtc/hctosys.c: unable to open rtc device (rtc0) VFS: Mounted root (squashfs filesystem) readonly on device 3:0. Freeing unused kernel memory: 148K (c02ee000 - c0313000) mount: mounting /de