No distccd in $PATH, acceleration disabled.

>> =============================================================
>> OpenBIOS 1.0 [Sep 11 2009 06:53]
>> Configuration device id QEMU version 1 machine id 2
>> CPUs: 1
>> Memory: 128M
>> UUID: 00000000-0000-0000-0000-000000000000
>> CPU type PowerPC,750
Welcome to OpenBIOS v1.0 built on Sep 11 2009 06:53

>> [ppc] Kernel already loaded (0x01000000 + 0x003265b9) (initrd 0x00000000 + 0x00000000)
>> [ppc] Kernel command line: root=/dev/hda rw init=/usr/sbin/init.sh panic=1 PATH=/usr/bin console=ttyS0
OF stdout device is: /pci@80000000/mac-io@4/escc@13000/ch-b@13000
Preparing to boot Linux version 2.6.31.5 (landley@securitybreach) (gcc version 4.2.1) #1 Thu Nov 5 21:32:22 CST 2009
command line: root=/dev/hda rw init=/usr/sbin/init.sh panic=1 PATH=/usr/bin console=ttyS0
memory layout at init:
alloc_bottom : 0132b000
alloc_top    : 08000000
alloc_top_hi : 08000000
rmo_top      : 08000000
ram_top      : 08000000
found display   : /pci@80000000/QEMU,VGA@1, opening... done
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x0132c000 -> 0x0132c383
Device tree struct  0x0132d000 -> 0x0132f000
Calling quiesce...
returning from prom_init
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Probing PCI hardware
bio: create slab <bio-0> at 0
Switched to NOHz mode on CPU #0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 246
io scheduler noop registered (default)
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
ttyS0 at MMIO 0x80813020 (irq = 16) is a Z85c30 ESCC - Serial port
ttyS1 at MMIO 0x80813000 (irq = 17) is a Z85c30 ESCC - Serial port
loop: module loaded
MacIO PCI driver attached to Heathrow chipset
Macintosh CUDA driver v0.5 for Unified ADB.
Uniform Multi-Platform E-IDE driver
adb: starting probe task...
adb: finished probe task...
ide-pmac: Found Apple Heathrow ATA controller (macio), bus ID 0, irq 19
hda: QEMU HARDDISK, ATA DISK drive
hda: MWDMA2 mode selected
ide0 at 0xc9010000-0xc9010070,0xc9010160 on irq 19
ide-gd driver 1.18
hda: max request size: 512KiB
hda: 25608 sectors (13 MB) w/256KiB Cache, CHS=25/255/63
hda: cache flushes supported
hda: unknown partition table
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
eth0: RealTek RTL-8029 found at 0x400, IRQ 23, 52:54:00:12:34:56.
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
video1394: Installed video1394 module
ieee1394: raw1394: /dev/raw1394 device initialized
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 17
VFS: Mounted root (squashfs filesystem) readonly on device 3:0.
Freeing unused kernel memory: 168k init
Not using distcc.
Type exit when done.
/home # cat /proc/cpuinfo
processor	: 0
cpu		: 740/750
clock		: 1000.000000MHz
revision	: 3.1 (pvr 0008 0301)
bogomips	: 33.21
timebase	: 16605533
platform	: PowerMac
model		: Power Macintosh
machine		: Power Macintosh
motherboard	: AAPL,PowerMac G3 MacRISC
detected as	: 49 (PowerMac G3 (Silk))
pmac flags	: 00000000
pmac-generation	: OldWorld
Memory		: 128 MB
/home #