>> ============================================================= >> OpenBIOS 1.1 [Nov 15 2014 13:00] >> Configuration device id QEMU version 1 machine id 2 >> CPUs: 1 >> Memory: 128M >> UUID: 00000000-0000-0000-0000-000000000000 >> CPU type PowerPC,750 milliseconds isn't unique. Welcome to OpenBIOS v1.1 built on Nov 15 2014 13:00 >> [ppc] Kernel already loaded (0x01000000 + 0x003aeaf4) (initrd 0x014af000 + 0x0006581b) >> [ppc] Kernel command line: panic=1 console=ttyS0 HOST=powerpc OF stdout device is: /pci@80000000/mac-io@3/escc@13000/ch-b@13000 Preparing to boot Linux version 3.19.0 (landley@halfbrick) (gcc version 4.2.1) #1 Wed Apr 29 12:55:31 CDT 2015 Detected machine type: 00000400 command line: memory layout at init: memory_limit : 00000000 (16 MB aligned) alloc_bottom : 01515000 alloc_top : 08000000 alloc_top_hi : 08000000 rmo_top : 08000000 ram_top : 08000000 found display : /pci@80000000/QEMU,VGA@1, opening... done copying OF device tree... Building dt strings... Building dt structure... Device tree strings 0x01516000 -> 0x01516512 Device tree struct 0x01517000 -> 0x01519000 Calling quiesce... returning from prom_init console [ttyS0] enabled bootconsole [udbg0] disabled pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) devtmpfs: initialized NET: Registered protocol family 16 PCI: Probing PCI hardware PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x7fffff] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfdffffff] (bus address [0x00000000-0x00ffffff]) pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff] pci_bus 0000:00: root bus resource [bus 00-ff] vgaarb: setting as boot device: PCI:0000:00:01.0 vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:01.0 SCSI subsystem initialized Switched to clocksource timebase NET: Registered protocol family 2 TCP established hash table entries: 1024 (order: 0, 4096 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP: reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 Unpacking initramfs... Freeing initrd memory: 404K (c14af000 - c1514000) futex hash table entries: 256 (order: -1, 3072 bytes) squashfs: version 4.0 (2009/01/31) Phillip Lougher 9p: Installing v9fs 9p2000 file system support io scheduler noop registered (default) pmac_zilog: 0.6 (Benjamin Herrenschmidt ) loop: module loaded MacIO PCI driver attached to Heathrow chipset 0.00013020:ch-a: ttyS0 at MMIO 0x81093020 (irq = 16, base_baud = 230400) is a Z85c30 ESCC - Serial port 0.00013000:ch-b: ttyS1 at MMIO 0x81093000 (irq = 17, base_baud = 230400) is a Z85c30 ESCC - Serial port Macintosh CUDA driver v0.5 for Unified ADB. Uniform Multi-Platform E-IDE driver adb: starting probe task... adb: finished probe task... ide-pmac: Found Apple Heathrow ATA controller (macio), bus ID 0, irq 19 ide0 at 0xc900c000-0xc900c070,0xc900c160 on irq 19 ide-pmac: Found Apple Heathrow ATA controller (macio), bus ID 0, irq 21 hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive hdc: MWDMA2 mode selected ide1 at 0xc900e000-0xc900e070,0xc900e160 on irq 21 ide-gd driver 1.18 ide-cd driver 5.00 ide-cd: hdc: ATAPI 4X DVD-ROM drive, 512kB Cache cdrom: Uniform CD-ROM driver Revision: 3.20 ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker ne2k-pci 0000:00:02.0 eth0: RealTek RTL-8029 found at 0x400, IRQ 23, 52:54:00:12:34:56. TCP: cubic registered NET: Registered protocol family 17 9pnet: Installing 9P2000 support drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 164K (c0332000 - c035b000) mount: '/dev/hdc'->'/mnt': No mediumqemu: terminating on signal 15 from pid 940 more/smoketest.sh: line 25: 939 Done sayhello 940 Terminated | more/timeout.sh ${TIMEOUT:-60} more/run-emulator-from-build.sh "$1"