audio: Could not init `oss' audio driver Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0x0 Linux version 3.18.0 (landley@halfbrick) (gcc version 4.2.1) #1 Mon Mar 9 00:04:58 CDT 2015 CPU: ARMv6-compatible processor [4107b362] revision 2 (ARMv6TEJ), cr=00c5387d CPU: VIPT aliasing data cache, unknown instruction cache Machine: ARM-Versatile PB Memory policy: Data cache writeback sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: panic=1 console=ttyAMA0 HOST=armv6l PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 125944K/131072K available (2539K kernel code, 154K rwdata, 504K rodata, 124K init, 179K bss, 5128K reserved) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xffe00000 (2048 kB) vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) .text : 0xc0008000 - 0xc0300fa0 (3044 kB) .init : 0xc0301000 - 0xc0320000 ( 124 kB) .data : 0xc0320000 - 0xc0346b20 ( 155 kB) .bss : 0xc0346b20 - 0xc037397c ( 180 kB) SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:224 VIC @f1140000: id 0x00041190, vendor 0x41 FPGA IRQ chip 0 "SIC" @ f1003000, 13 irqs, parent IRQ: 63 Console: colour dummy device 80x30 Calibrating delay loop... 294.91 BogoMIPS (lpj=1474560) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok Setting up static identity map for 0x280e00 - 0x280e38 devtmpfs: initialized VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 4 NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations Serial: AMBA PL011 UART driver uart-pl011 dev:f1: ttyAMA0 at MMIO 0x101f1000 (irq = 44, base_baud = 0) is a PL011 rev1 console [ttyAMA0] enabled uart-pl011 dev:f2: ttyAMA1 at MMIO 0x101f2000 (irq = 45, base_baud = 0) is a PL011 rev1 uart-pl011 dev:f3: ttyAMA2 at MMIO 0x101f3000 (irq = 46, base_baud = 0) is a PL011 rev1 uart-pl011 fpga:09: ttyAMA3 at MMIO 0x10009000 (irq = 70, base_baud = 0) is a PL011 rev1 PCI core found (slot 11) PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] PCI: bus0: Fast back to back transfers disabled pci 0000:00:0c.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] pci 0000:00:0d.0: BAR 2: assigned [mem 0x50000000-0x50001fff] pci 0000:00:0d.0: BAR 1: assigned [mem 0x50002000-0x500023ff] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50002400-0x500024ff] pci 0000:00:0d.0: BAR 0: assigned [io 0x1400-0x14ff] vgaarb: loaded SCSI subsystem initialized Switched to clocksource timer3 NET: Registered protocol family 2 TCP established hash table entries: 1024 (order: 0, 4096 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP: reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 Unpacking initramfs... Freeing initrd memory: 428K (c4000000 - c406b000) futex hash table entries: 256 (order: -1, 3072 bytes) squashfs: version 4.0 (2009/01/31) Phillip Lougher 9p: Installing v9fs 9p2000 file system support msgmni has been set to 246 io scheduler noop registered (default) loop: module loaded Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 ide-cd driver 5.00 sym53c8xx 0000:00:0d.0: enabling device (0100 -> 0103) sym0: <895a> rev 0x0 at pci 0000:00:0d.0 irq 59 sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking sym0: SCSI BUS has been reset. scsi host0: sym-2.2.3 scsi 0:0:2:0: CD-ROM QEMU QEMU CD-ROM 2.2. PQ: 0 ANSI: 5 scsi target0:0:2: tagged command queuing enabled, command queue depth 16. scsi target0:0:2: Beginning Domain Validation scsi target0:0:2: Domain Validation skipping write tests scsi target0:0:2: Ending Domain Validation sr 0:0:2:0: [sr0] scsi3-mmc drive: 16x/50x cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) 8139cp 0000:00:0c.0: enabling device (0100 -> 0103) 8139cp 0000:00:0c.0 eth0: RTL-8139C+ at 0xc8874400, 52:54:00:12:34:56, IRQ 59 rtc-pl031 dev:e8: rtc core: registered pl031 as rtc0 TCP: cubic registered NET: Registered protocol family 17 9pnet: Installing 9P2000 support rtc-pl031 dev:e8: setting system clock to 2015-03-09 05:06:11 UTC (1425877571) Freeing unused kernel memory: 124K (c0301000 - c0320000) rc/thread-hello2.c -lpthread -o /tmp/hello 8139cp 0000:00:0c.0 eth0: link up, 100Mbps, full-duplex, lpa 0x05E1 Type exit when done. (armv6l:1) / # rc/thread-hello2.c -lpthread -o /tmp/hello /bin/ash: rc/thread-hello2.c: not found (armv6l:1) / # /tmp/hello /bin/ash: /tmp/hello: not found (armv6l:1) / # exit reboot: Restarting system