Linux version 3.11.0 (landley@driftwood) (gcc version 4.2.1) #1 Thu Sep 12 06:30:08 CDT 2013 Command line: root=/dev/hda rw init=/sbin/init.sh panic=1 PATH=/bin:/sbin console=ttyS0 HOST=x86_64 e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x0000000007ffdfff] usable BIOS-e820: [mem 0x0000000007ffe000-0x0000000007ffffff] reserved BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved NX (Execute Disable) protection: active SMBIOS 2.4 present. No AGP bridge found e820: last_pfn = 0x7ffe max_arch_pfn = 0x400000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping: [mem 0x00000000-0x000fffff] init_memory_mapping: [mem 0x07c00000-0x07dfffff] init_memory_mapping: [mem 0x04000000-0x07bfffff] init_memory_mapping: [mem 0x00100000-0x03ffffff] init_memory_mapping: [mem 0x07e00000-0x07ffdfff] ACPI: RSDP 00000000000f16f0 00014 (v00 BOCHS ) ACPI: RSDT 0000000007ffe450 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0000000007ffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0000000007ffe490 01137 (v01 BXPC BXDSDT 00000001 INTL 20100528) ACPI: FACS 0000000007ffff40 00040 ACPI: SSDT 0000000007fff700 00838 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) ACPI: APIC 0000000007fff610 00078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 0000000007fff5d0 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) Zone ranges: DMA [mem 0x00001000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal empty Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009efff] node 0: [mem 0x00100000-0x07ffdfff] ACPI: PM-Timer IO Port: 0xb008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 e820: [mem 0x08000000-0xfffbffff] available for PCI devices Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32135 Kernel command line: root=/dev/hda rw init=/sbin/init.sh panic=1 PATH=/bin:/sbin console=ttyS0 HOST=x86_64 PID hash table entries: 512 (order: 0, 4096 bytes) Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) Checking aperture... No AGP bridge found Memory: 123876K/130672K available (2305K kernel code, 330K rwdata, 800K rodata, 524K init, 412K bss, 6796K reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:4352 nr_irqs:48 16 Console: colour VGA+ 80x25 console [ttyS0] enabled tsc: Fast TSC calibration failed tsc: Unable to calibrate against PIT tsc: using HPET reference calibration tsc: Detected 2394.568 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.13 BogoMIPS (lpj=9578272) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 tlb_flushall_shift: -1 CPU: AMD QEMU Virtual CPU version 1.6.0 (fam: 06, model: 02, stepping: 03) ACPI: Core revision 20130517 ACPI: All ACPI Tables successfully acquired Performance Events: Broken PMU hardware detected, using software events only. Failed to access perfctr msr (MSR c0010004 is 0) ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 devtmpfs: initialized NET: Registered protocol family 16 ACPI: bus type PCI registered PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKS] (IRQs *9) ACPI: Enabled 16 GPEs in block 00 to 0F vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized PCI: Using ACPI for IRQ routing Switched to clocksource hpet pnp: PnP ACPI init ACPI: bus type PNP registered pnp: PnP ACPI: found 7 devices ACPI: bus type PNP unregistered NET: Registered protocol family 2 TCP established hash table entries: 1024 (order: 2, 16384 bytes) TCP bind hash table entries: 1024 (order: 1, 8192 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP: reno registered UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:01.0: PIIX3: Enabling Passive Release pci 0000:00:01.0: Activating ISA DMA hang workarounds squashfs: version 4.0 (2009/01/31) Phillip Lougher 9p: Installing v9fs 9p2000 file system support msgmni has been set to 241 io scheduler noop registered (default) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A loop: module loaded Uniform Multi-Platform E-IDE driver piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00) piix 0000:00:01.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xc040-0xc047 ide1: BM-DMA at 0xc048-0xc04f hda: QEMU HARDDISK, ATA DISK drive tsc: Refined TSC clocksource calibration: 2394.559 MHz hda: MWDMA2 mode selected hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive Switched to clocksource tsc hdc: MWDMA2 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide-gd driver 1.18 hda: max request size: 512KiB hda: 63560 sectors (32 MB) w/256KiB Cache, CHS=63/255/63 hda: cache flushes supported hda: unknown partition table ide-cd driver 5.00 ide-cd: hdc: ATAPI 4X DVD-ROM drive, 512kB Cache cdrom: Uniform CD-ROM driver Revision: 3.20 e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice TCP: cubic registered NET: Registered protocol family 17 9pnet: Installing 9P2000 support input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) VFS: Mounted root (squashfs filesystem) readonly on device 3:0. Freeing unused kernel memory: 524K (ffffffff8135e000 - ffffffff813e1000) df mount: mounting /dev/hdc on /mnt failed: No medium found Not using distcc. Type exit when done. (x86_64:1) /home # df Filesystem 1K-blocks Used Available Use% Mounted on /home 62200 0 62200 0% /home /tmp 62200 0 62200 0% /tmp dev 61936 0 61936 0% /dev /dev/root 31872 31872 0 100% / (x86_64:1) /home # gcc -s /usr/src/thread-hello2.c -lpthread -o /tmp/hello e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX (x86_64:1) /home # /tmp/hello Hello world! (x86_64:1) /home # exit reboot: Restarting system reboot: machine restart