oss: Could not initialize DAC oss: Failed to open `/dev/dsp' oss: Reason: No such file or directory oss: Could not initialize DAC oss: Failed to open `/dev/dsp' oss: Reason: No such file or directory audio: Failed to create voice `lm4549.out' Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0x0 Linux version 3.11.0 (landley@driftwood) (gcc version 4.2.1) #1 Thu Sep 12 06:28:59 CDT 2013 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 CPU: VIVT data cache, VIVT instruction cache Machine: ARM-Versatile PB Memory policy: ECC disabled, Data cache writeback sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: root=/dev/sda rw init=/sbin/init.sh panic=1 PATH=/bin:/sbin console=ttyAMA0 HOST=armv4tl PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 126600K/131072K available (2358K kernel code, 150K rwdata, 480K rodata, 98K init, 172K bss, 4472K reserved) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) .text : 0xc0008000 - 0xc02cdf80 (2840 kB) .init : 0xc02ce000 - 0xc02e69d0 ( 99 kB) .data : 0xc02e8000 - 0xc030d840 ( 151 kB) .bss : 0xc030d840 - 0xc0338930 ( 173 kB) SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:224 VIC @f1140000: id 0x00041190, vendor 0x41 FPGA IRQ chip 0 "SIC" @ f1003000, 13 irqs Console: colour dummy device 80x30 Calibrating delay loop... 202.13 BogoMIPS (lpj=1010688) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok Setting up static identity map for 0xc02539f8 - 0xc0253a34 devtmpfs: initialized NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations Serial: AMBA PL011 UART driver dev:f1: ttyAMA0 at MMIO 0x101f1000 (irq = 44) is a PL011 rev1 console [ttyAMA0] enabled dev:f2: ttyAMA1 at MMIO 0x101f2000 (irq = 45) is a PL011 rev1 dev:f3: ttyAMA2 at MMIO 0x101f3000 (irq = 46) is a PL011 rev1 fpga:09: ttyAMA3 at MMIO 0x10009000 (irq = 70) is a PL011 rev1 PCI core found (slot 11) PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] PCI: bus0: Fast back to back transfers disabled pci 0000:00:0c.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] pci 0000:00:0d.0: BAR 2: assigned [mem 0x50000000-0x50001fff] pci 0000:00:0d.0: BAR 1: assigned [mem 0x50002000-0x500023ff] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50002400-0x500024ff] pci 0000:00:0d.0: BAR 0: assigned [io 0x1400-0x14ff] bio: create slab at 0 vgaarb: loaded SCSI subsystem initialized Switched to clocksource timer3 NET: Registered protocol family 2 TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP: reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 squashfs: version 4.0 (2009/01/31) Phillip Lougher 9p: Installing v9fs 9p2000 file system support msgmni has been set to 247 io scheduler noop registered (default) loop: module loaded Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 ide-cd driver 5.00 PCI: enabling device 0000:00:0d.0 (0100 -> 0103) sym0: <895a> rev 0x0 at pci 0000:00:0d.0 irq 59 sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking sym0: SCSI BUS has been reset. scsi0 : sym-2.2.3 sym0: unknown interrupt(s) ignored, ISTAT=0x5 DSTAT=0x80 SIST=0x0 scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 1.6. PQ: 0 ANSI: 5 scsi target0:0:0: tagged command queuing enabled, command queue depth 16. scsi target0:0:0: Beginning Domain Validation scsi target0:0:0: Domain Validation skipping write tests scsi target0:0:0: Ending Domain Validation scsi 0:0:2:0: CD-ROM QEMU QEMU CD-ROM 1.6. PQ: 0 ANSI: 5 scsi target0:0:2: tagged command queuing enabled, command queue depth 16. scsi target0:0:2: Beginning Domain Validation scsi target0:0:2: Domain Validation skipping write tests scsi target0:0:2: Ending Domain Validation sr0: scsi3-mmc drive: 16x/50x cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) PCI: enabling device 0000:00:0c.0 (0100 -> 0103) 8139cp 0000:00:0c.0 eth0: RTL-8139C+ at 0xc8874400, 52:54:00:12:34:56, IRQ 59 mousedev: PS/2 mouse device common for all mice sd 0:0:0:0: [sda] 56312 512-byte logical blocks: (28.8 MB/27.4 MiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA rtc-pl031 dev:e8: rtc core: registered pl031 as rtc0 TCP: cubic registered NET: Registered protocol family 17 9pnet: Installing 9P2000 support VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 sda: unknown partition table rtc-pl031 dev:e8: setting system clock to 2013-09-12 11:30:33 UTC (1378985433) sd 0:0:0:0: [sda] Attached SCSI disk VFS: Mounted root (squashfs filesystem) readonly on device 8:0. Freeing unused kernel memory: 96K (c02ce000 - c02e6000) 8139cp 0000:00:0c.0 eth0: link up, 100Mbps, full-duplex, lpa 0x05E1 Not using distcc. Type exit when done. (armv4tl:1) /home # df Filesystem 1K-blocks Used Available Use% Mounted on /home 63348 0 63348 0% /home /tmp 63348 0 63348 0% /tmp dev 63300 0 63300 0% /dev /dev/root 28160 28160 0 100% / (armv4tl:1) /home # gcc -s /usr/src/thread-hello2.c -lpthread -o /tmp/hello (armv4tl:1) /home # /tmp/hello Hello world! (armv4tl:1) /home # exit sd 0:0:0:0: [sda] Synchronizing SCSI cache reboot: Restarting system